July 2016

Benjani 1976 is back with a Snowtrooper Costume!
-- Posted by Tamer on Sunday, July 31 2016
"First post in years,been busy with family life in general and moving about,busy with work but did manage to finish a snowtrooper to go with the TK I did a while back.

Jango almost done and anakin so robes about the halfway point.

Had a good day out at London comic con,stopped for about 100 pics in only a few hours. Apparently rare to see a full snowtrooper at these events looking like the real McCoy.
Definitely do it again next year,maybe even get the chance to get in a pic with Mr Vader himself."

Nice Snowtrooper build and it was great to see him back!

Ron Hembling shares more progress on his Boba project...
-- Posted by Tamer on Sunday, July 31 2016
"Hi All,

I have added the spakfilla/sand mix to the dio and I have also done the rsut and weathered effects to the hull. I will have my next video up soon showing how I did it.

Ron"

It is looking great Ron! Here are the two other videos he uploaded too:

Black Thorne is back with an update...
-- Posted by Tamer on Sunday, July 31 2016
"I made the first part of my immortal army."

You can't have enough skeletons if you ask me!

Felipe Gomez shares his Star Destroyer Project progress...
-- Posted by Tamer on Sunday, July 31 2016
The fiber optic lighting is looking fantastic!

A new day and a new dio from Stefan!
-- Posted by Tamer on Sunday, July 31 2016
Senator Padme's apartment for this dio!

Ron Hembling starts a Boba Fett Project...
-- Posted by Tamer on Saturday, July 30 2016
"Hi All,

Next Project - Boba Fett

This is a commission piece and showed the client the design and he was very happy the way it was looking like so far. I still need to glue the joints and putty them up and add the tissue paper to the cloth sections of the uniform.

I still have to do more damage to the hull section which it is made using plastic card and I used hand drill to drill out the pivots. The base is a thick piece of balsa just cut to size and the blue foam will be a small rock out crop."

Matter of Fact he got the hull damage done too. I will put the video below. You can also follow along with images in his Project Thread.

OC47150 is back with four new customs...
-- Posted by Tamer on Saturday, July 30 2016
"A few more customs to show off.

A post-ROTS Bail Organa. Repainted a Bespin guard body and the cape from the casual Biggs Darklighter for a little flair. Also added a little grey to Bail's temples.

This is what when the Star Wars and SHIELD universes collide. A bad a$$ Mace.

I came across the rough Bad Batch episodes from the Clone Wars, and really liked Hunter, the leader of the group. I used one of the TRU exclusive stealth ops clone trooper body's and the head from the GI Joe Spirit figure. Tried to match the paint scheme as much as I possibly could based on the pix."

I would like to think ole Mace didn't bite it during Order 66 time myself!

The Closet Jedi shows us a SD Update...
-- Posted by Tamer on Saturday, July 30 2016
Via our Facebook Page.

A new day and a new dio from Stefan!
-- Posted by Tamer on Saturday, July 30 2016
Its The Clone Wars this time!

Big Bad Toy Store lists great new pre-order and in stock Items we like!
-- Posted by Tamer on Friday, July 29 2016
NEW NECA
Neca presents new items up for preorder! A 1/4 scale Mayoral Penguin from the movie Batman Returns featuring the likeness of Danny DeVito, a new 7” Aliens figure series including the powerful Gorilla Alien, the Queen Facehugger, and Mantis Alien, Alien vs Predator Diorama Element Pyramid Pillar and glow-in-the-dark Xenomorph Egg Set, Heroes of the Storm World of Warcraft Sylvanas and Starcraft Raynor 7” figures, bloody 7” Ash vs Demon Spawn three pack, a full size TMNT Leonardo Foam Prop Replica Figure, and much more are all available! Don’t miss out on these collectible items.
http://www.bigbadtoystore.com/bbts/list.aspx?list=21468

MASTERS OF THE UNIVERSE FIGURES
Super 7 presents iconic Masters of the Universe toys, the 1980s rubber M.U.S.C.L.E. figures and 3.75” Tri Klops, Trap Jaw, He-Man, Skeletor, Man At arms, and Sorceress figures! Each full-color retro action figure comes with 5 points of articulation and accessories, while the rubber 1.75” M.U.S.C.L.E. figures come packaged in a retro trash can with molded Skeletor lid. Don’t miss out on these throwback toys!
http://www.bigbadtoystore.com/bbts/search.aspx?search=super%20masters

ACID RAIN FORSETI VIKING SHIELD
Acid Rain presents The Forseti Viking Shield, a great addition to the Acid Rain collection! The Forseti comes inclusive with an armored viking ready for snow battle. This figure includes a submachine gun, a helmet with goggles that hinge open and a packing box that matches perfectly with the Laurel Scale. $29.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=ORI10023&mode=retail

NEW BLUEFIN SDCC EXCLUSIVES
Bandai Japan, Sentinel, TruForce Collectibles, and more have all announced new figures and toys from San Diego Comic Con! Star Wars Movie Realization Sandtrooper figure and the Gundam Converge LTD box of 4 are new from Bandai Japan. Mega Man and his helmet are brought to you by TruForce Collectibles and Multiverse Studio Inc. Beast Kingdom brings new Star Wars Egg Attack figures, a Stormtrooper and Captain Phasma. These and more are available from Bluefin!
http://www.bigbadtoystore.com/bbts/list.aspx?list=21482

NEW KOTOBUKIYA
Kotobukiya presents new Frame Arm model kits, Star Wars accessories, and a new Nana Abe Cindarella Girls statue! The Frame Arm model kit series features a basic core robot that can then attach any accessory or armor parts in the series. By attaching various interchangeable parts, you can create any variation of robot! Star Wars lightsabers are now chopsticks thanks to Kotobukiya, as well as business card holders! Finally, a new Nana Abe Cindarella Girls figure is available as a 1/8 scale, featuring her standing on one leg in a pastel colored uniform. These and more are available from Kotobukiya.
http://www.bigbadtoystore.com/bbts/list.aspx?list=21517

NEW SIDESHOW COLLECTIBLES AND HOT TOYS
Sideshow Collectibles and Hot Toys presents new Marvel, DC, Star Wars, Aliens, Back to The Future, and many more 1/6 and 1/4 scale figures! Join the fight against the dark side with R2-D2 and C-3PO as 1/4 scale figures, or collect the Avengers with Captain America, Vision, and Quicksilver. Don’t miss out on a 1/4 scale Superman Red Son figure, 1/6 scale Alien Warrior figure, and many more beautifully crafted figures and extremely detailed premium format statues.
http://www.bigbadtoystore.com/bbts/list.aspx?list=18178

Please vote for your favorite in the latest custom challenge!
-- Posted by Tamer on Friday, July 29 2016
Talk about some fun I had this morning putting this poll together. There are some great entrants.

Please take the time to vote. Thank you to all the great customizers who posted their Gunners!

Stronox shares some of his latest work...
-- Posted by Tamer on Friday, July 29 2016
"Hi guys! I have been very busy lately with commission work so I thought I would show off

a couple of recent ones...I am very pleased that my customers are very pleased! I have enjoyed the challenges thus far since I have really started opening myself up to commission requests..."

That is great news to me! Talk about great looking custom action figures!

JDeck gives us Bandai news too...
-- Posted by Tamer on Friday, July 29 2016
That new TIE Interceptor kit is gonna be fantastic!

More Dragon Model news from JDeck...
-- Posted by Tamer on Friday, July 29 2016
"Dragon booth at Ani-con.

These are actually the first full images of both the 1/35 and 1/144 AT-AT. I want them all! Still no release date dangit."

Well you can count me in for one of the larger ones!

Clone Troopr shows us where he got his Sith Trooper Helmet!
-- Posted by Tamer on Friday, July 29 2016
Click here to go get yourself the same great Sith Trooper Bucket that Clone Troopr used to make his great Sith Troopr we featured yesterday.

My kind of SW Artist...
-- Posted by Tamer on Friday, July 29 2016
You gotta love AT-AT Driver artwork eh?

Congrats on Six Years!
-- Posted by Tamer on Friday, July 29 2016
Darth Daddy and Elias celebrated 6 years for Customs for the Kid yesterday!

A new day and a new dio from Stefan!
-- Posted by Tamer on Friday, July 29 2016
Finn gets caught in this one!

OC47150 shows us his Gunner for the latest custom challenge!
-- Posted by Tamer on Thursday, July 28 2016
"My entry. Used the EVO trooper body and an AT-AT helmet. If you look closely, you will see dirt on the helmet. Yes, it's real. The fig fell over while I was taking pictures."

Looks nice to me! Folks I do believe that is all the entries we have to feature. Look for the vote tomorrow!

I-am-Boba-Fett is back with an update...
-- Posted by Tamer on Thursday, July 28 2016
"Here's a custom LORD STARKILLER action figure. All sculpting is done by me."

It is loaded with a metric ton of great features.

Ron Hembling completes his AT-AT Gunner!
-- Posted by Tamer on Thursday, July 28 2016
"Hi All,

My first video/tutorial is complete (see video above).

And my outdoor pics are attached as well.

Ron"

Talk about all kinds of awesome. See the image below!

Clone Troopr is back...
-- Posted by Tamer on Thursday, July 28 2016
"Here’s another guy from Star Wars: The Old Republic, this time from the beautiful cinematic trailers. Feast your eyes on the Sith Trooper. At one point, there was a report that Hasbro had this in the works, but it was cancelled sometime later."

Such a shame, its a great looking figure!

Guns Empty is back with a new mini-dio and figure...
-- Posted by Tamer on Thursday, July 28 2016
"Alright! Finally got my slow butt to get some pictures done.

Here's a new piece: ARC clone commander, operating in a blue forest.

Color theme is actually inspired by a toy I still have from childhood; German Luftwaffe BF-109 in early-war camouflage."

I Like it!

Star-Fall Webcomic Update...
-- Posted by Tamer on Thursday, July 28 2016
"Tonight is night 6 and our final night of the Star-Fall SDCC custom action figure tribute. We've been unveiling new custom action figure work from the series each night, and we've saved the best for last! We're bringing you the first HD look at the concept art for the first major villain to be featured in an upcoming Star-Fall story line.

Tastron Moloch, is a Tellassii Death Priest, an evil maejj and a weaver of foul maegicks, most unnatural. He wields the Staff of Envy and his headdress is bedecked with the preserved rotting skulls of the lineage of masters of his order of the Sha-Aall--the Daiieth Speikers. His breathing apparatus supplies him with a steady flow of vapors of the decayed which allow him to sustain his life indefinitely."

Wow, talk about one cool custom!

JDeck shares update on Dragon Models...
-- Posted by Tamer on Thursday, July 28 2016
"Dragon is killing me with all these teasers. They announced that they will announce the release dates this Summer. Get with it already. But these images are awesome."

I would agree.

Chris Jordan shows us some snow fun...
-- Posted by Tamer on Thursday, July 28 2016
Just what we needed for this high temp week!

Stefan strikes again...
-- Posted by Tamer on Thursday, July 28 2016
Its FO this time out.

I-am-Boba-Fett gets his Gunner on for the latest customizing challenge...
-- Posted by Tamer on Wednesday, July 27 2016
"Here's my entry. Made it! Just getting in under the wire. Not my first concept for this Heavy Gunner of mine as I had an all new different style of Heavy Gunner Stormtrooper helmet built out and resin cast but did not get to finish painting it in time. So...here's my alternate custom AT-AT Heavy Gunner figure with all resin cast waist/hip pouches and an all new custom made weapon."

I know I sure like the look. It is almost time to vote for our favorite. I just have one more to feature and we are set.

JDeck shows us the last Custom Raider...
-- Posted by Tamer on Wednesday, July 27 2016
"Otaktay was a Weekway warrior, who formed a resitance against the Imperial occupation. For this the Empire destroyed his entire village. His life was spared, so he could live alone in shame, for standing up to the Empire. He was then captured by Pirates, to be sold as a slave to the Hutts. However he was able to convince the captain to hire him on the crew. The only compensation he wanted was revenge. Otaktay and the crew were on a routine mission to steal an imperial cargo ship, but it was a trap. Their ship was surrounded by Star Destroyers, and fatally struck. However they were able to crash land on a nearby planet. Again Otaktay was the only survivor. He was rescued by a rebel scout and nursed back to health. Later he was debriefed by Major Panno, and became one of the Raiders.

That's it for Panno's Raiders. He's a POTF2 Weekway+ Orrimarrko + col. Cracken hands.

I added a scarf made of an old work shirt. His hair is my own. It may sound gross, but I think it looks good. And I gave him some warrior face paint."

I really enjoyed this project.

Star-Fall Webcomic Update...
-- Posted by Tamer on Wednesday, July 27 2016
"Night 5 of the Star-Fall SDCC custom tribute brings us to a character that we've seen briefly in the Star-Fall webcomic on the cover of chapter 1.

Leyva "3-Tails" Heidaya is a Wayfarer Frontiersman and crewmate of J'Vaadus Nu. She introduces us to yet another new alien race, the Faundayrians an advanced spacefaring people descended from ancient burrowing rodents found in the Faund system. They were one of the non-human species to join the Wayfarers. For every time Leyva has been close to death she ties her the hair of her mane into another "tail".

She looks fantastic!

Bronxstalker back with multiple updates!
-- Posted by Tamer on Wednesday, July 27 2016
"Another non Mando figure I complete. This one is of a bandit/scavenger. I imagine that the SW universe is incredibly large, and the possibilities of characters out there are endless."

He looks great to me. Click here if you want to go add him to your own custom collection! Make sure you scroll around once you get in there as there are definitely a few more to peruse.

Steezy Collector gives us a Sith Warrior...
-- Posted by Tamer on Wednesday, July 27 2016
"I finished up this Sith Warrior tonight. I went for sort of a KOTOR look with the big bulky armour. The shoulder armour is also removable."

Click on through for the full recipe and more images. I like him!

The Closet Jedi updates us on his Star Destroyer Project...
-- Posted by Tamer on Wednesday, July 27 2016
"So I have been working on ISD V 0.5. I had 2 smaller pieces ordered so I could get a sense of scale and to figure out how much of a slant the walls needed to be as well as how much of a curve I should add to the windows."

Also I wanted to make sure I was happy with the design. I wanted to make sure that I would be able to easily glue and sand the pieces together before I had to do it on a much larger piece. It is very difficult to go from the computer straight to building with out something to put your hands on. I needed to see the pieces so I could gauge how the curve of the windows would work."

Trust me folks that is just the beginning of the update. It is gonna be fantastic!

A new day and a new dio from Stefan!
-- Posted by Tamer on Wednesday, July 27 2016
Its a small Hoth Dio this time out! I so enjoyed that Hoth Speederbike Two Pack.

Disneystore.com having Star Wars Sale till Sunday...
-- Posted by Tamer on Wednesday, July 27 2016
Looks like you can get over 30% off many items and free shipping on orders over $75!

Click here to get started.

Had to show you the SDCC Exclusive Obi-Wan Hologram...
-- Posted by Tamer on Tuesday, July 26 2016
Folks hands down one of the best Hasbro Offerings (in my top 5) these eyes have ever seen. I know we get on Hasbro's case from time to time, but they hit a Grand Slam on this one!

Trust me, you are gonna want one!

Hasbro sends samples of their SDCC Exclusives!
-- Posted by Tamer on Tuesday, July 26 2016
Gallery is loaded!Folks all are so cool. I mean absolutely fantastic!

The OTC Guy in me can only describe the Obi-Wan Set as monumental. Seeing that light up Leia Hologram with the awesome recording gave me the tingles folks! Epic win Hasbro. Epic!

Hear the answers for our Hasbro SDCC Q and A Session!
-- Posted by Tamer on Tuesday, July 26 2016


I just received this myself so we can listen to this and react to it at the same time! First off, hats off to Todd for taking a bit of his SDCC Time to once again field our questions to Hasbro. He always does a great job and we so appreciate his effort!

Two, thank you to Steve Evans and the entire Hasbro Star Wars Brand Team for taking some of their busy time too right after the Hasbro SW Presentation to answer our questions to the limits they are allowed. I can't imagine how interesting it is to run that fine line of what they are able to share.

Three, we only had so many minutes folks and all of our questions didn't get answered so stay tuned as I try to get the rest of the list answered. Feel free to download here on your favorite device!

Hasbro Toy Shop lets us know August 9th is the day!
-- Posted by Tamer on Tuesday, July 26 2016
For those who have questions about their Celebration and SDCC 2016 exclusives here are your questions and answers:

"When will the Comic Con exclusives be available on the site?
Although subject to change, we are planning on having the Convention Exclusives available to order on Tuesday, August 9th.The product will be located in the EXCLUSIVES category. No phone orders will be accepted. All Convention Exclusives are excluded from any promotions and discounts.

What will the limits be for the figures?
The limits will be the same at the show and on the site once they go live. These limits are per person and per household.

Can I get on a waiting list for Comic Con items?
No, HasbroToyShop.com does not have a waiting list for any items including Comic Con items.

Can I preorder Comic Con items?
No. We will not be preselling the Comic Con items."

Here is your link for the page to find the exclusives (for all brands not just Star Wars) when they go live!

Star-Fall Webcomic Update...
-- Posted by Tamer on Tuesday, July 26 2016
"We're kicking off night 4 of the Star-Fall SDCC custom action figure tribute in the Dreamer's Burden medical bay. All long-flight Star-Cavalry starships have a medical bay where crewers can go for treatment for anything from stasis sickness to mortal wounds sustained in combat.

Since losing her right arm and leg in the line of duty, Nef makes regular visits to the medical bay for prosthesis maintenance and physical therapy to ensure she continues to make a full recovery. Because she's there so often, she's become friendly with the staff--especially Combat Doctor Myejka Kitfrost, a young battlefield medical officer and head of the combat trauma team. It was Myejka that helped Nef adjust to her first combat model prostheses when she returned to active duty status. From there the two became fast friends."

It is great seeing this SDCC Customizing Tribute!

Custom Jedi is back!
-- Posted by Tamer on Tuesday, July 26 2016
"After a bit of a life detour, I've been trying to ease back into customizing with a few repaints.

That's inspired me to start my first real project in more than a year, I think...

Leia in Endor dress.

She'll be scaled to the proper height, have added articulation and soft goods skirt."

It is great to see him back.

Stefan with yet another new dio...
-- Posted by Tamer on Tuesday, July 26 2016
He seems like he is good for at least one new Star Wars Dio per day. Talk about having some great fun!

This made me go wow yesterday...
-- Posted by Tamer on Tuesday, July 26 2016
I found this from Brandon Flores yesterday while perusing FB. Talk about astounding!

Todd get us Hasbro Booth Images...
-- Posted by Tamer on Monday, July 25 2016
Wow, some of those new six inch figures are looking fantastic. Qui Gon, Hera, Lando, Royal Guard, and that Tusken Raider are off the charts cool!

Starchasers gets his Gunner In for the for the latest customizing challenge!
-- Posted by Tamer on Monday, July 25 2016
"Cref Pteska - from Corulag recruited to the Armored Calvary attached to the special forces Lightning Battalion. Cref was part of the infamous Vestar campaign, during which most of his unit was destroyed. Cref's marksmanship with the heavier weapons of the Armored Cavalry was well-known and earned him the moniker "Flare" ("because," his fellow soldiers said, "he lights 'em up."). Due to his reputation, his senior officers re-designated him as Heavy Armor and made him a door gunner on an AT-AT, attaching him to a newly formed unit made up of the surviving members of previous units called, appropriately, "The Misfits." Because he was previously associated with the Lightning Battalion, Cref was allowed to paint his armor a non-standard blue and he sports the lightning bolts on his helmet shield.

Recipe:
Helmet = Saga Collection AT-AT Driver
Body = Saga Legends Snowtrooper
Back armor = Saga Collection Snowtrooper (torso cracked opened and dremmeled out to fit)
Gun = the pack in from the TFA figures

I turned the AT-AT Driver's chest piece sideways, added a side column for symmetry and then cut off, re-oriented and re-attached the hoses. Then I used black coated wire to form the hoses that run between the back of the helmet and the "ear pieces" of the helmet."

He looks great to me. Look for us to feature the rest of the entries each day this week and then we will start the poll for you to pick your favorite!

William shares a great ROTS Vader Dio...
-- Posted by Tamer on Monday, July 25 2016
Its a great gallery!

Episode 14 is up!
-- Posted by Tamer on Monday, July 25 2016
This time out Darth Daddy and Peakob1 are discussing Hostage Crisis. It is nice to know The Clone Wars is alive and well!

A new day and a new dio from Stefan!
-- Posted by Tamer on Monday, July 25 2016
You knew it would probably happen!

Star-Fall Webcomic Update...
-- Posted by Tamer on Monday, July 25 2016
"Welcome to part 3 of the Star-Fall SDCC custom action figure tribute. Tonight we're introducing another male Star-Cavalry officer to the crew to round out our cast of characters. The Star-Cavalry ranks are comprised of 1000s of different species from 100s of star systems all working together to help safeguard the Altarus Starcluster.

T'ennick Taa Dvaan is a Gemling junior officer serving in the astronavigation corps aboard Nef's ship Dreamer's Burden. T'ennick was born to a military family on the smallest Gemling moon, Gemaan'Taa."

I am liking this SDCC Spread!

Ron Hembling is up to video 8 for his AT-AT Gunner!
-- Posted by Tamer on Monday, July 25 2016
"Hi All,

Here are the next four lot of videos enjoy and I'll have videos up of the figure soon.

Ron"

Wow, talk about fantastic!

Star Alien 70 shows us a new custom...
-- Posted by Tamer on Monday, July 25 2016
"Here’s another one for the Cantina. Reegesk the ranat.

This is a TAC Elis Helrot figure, slightly repainted, with the head from a ‘Schleich’ deer figure, slightly remodelled and repainted. The robe is from the Episode I Naboo accessory set.

Not sure whether to put a tail on it, I don’t want it to get in the way when it’s seated."

I agree you want him to be able to sit!

Darth Daddy is back with an update...
-- Posted by Tamer on Monday, July 25 2016
"We've fallen behind on documenting our blog posts lately.

Here are two new ones:

"332nd CLONE TROOPER"
created by Elias

CLONE WARS
"CHAM SYNDULLA"
work in progress by Darth Daddy

I only did a quick simple paint job on the head to finish him in time for our podcast. To wrap this figure up, I only need to finish painting the head tattoos, darken his skintone, and do some touch ups here and there throughout. I may also make a few adjustments to the headsculpt still."

They look good to me.

Black Thorne is back with an update...
-- Posted by Tamer on Monday, July 25 2016
"It's time to another update, a fantasy one. Here is Skeletor."

He looks fantastic to me. I can hear that maniacal laugh from here!

Tonphanan shares a great Custom Challenge Entry!
-- Posted by Tamer on Sunday, July 24 2016
"AT-AT Heavy Gunner - Desert Squad (Final entry)"

I love the work on the Helmet of this one!

It was great to see the final entries pour in. Give me a few days to showcase them all and then we will get to the member vote to see how wins the loot!

Ron Hembling with Part 4 of his Gunner Videos!
-- Posted by Tamer on Sunday, July 24 2016
As I promised here is his other video on how he is creating the great AT-AT Door Dio for his Custom AT-AT Heavy Gunner!

Ron Hembling gives us a two part video update on his Gunner Base...
-- Posted by Tamer on Sunday, July 24 2016
The other video will be loaded soon right above this one. Great stuff Ron. We love how toos!

Star-Fall Webcomic Update...
-- Posted by Tamer on Sunday, July 24 2016
"Welcome back! For part 2 of the 6 night SDCC Star-Fall tribute, we're debuting a never before seen character! A while back some of you expressed interest in seeing some male Star-Cavalry officers--now at long last they're finally here!

He's a high ranking Star-Cavalry officer and a SvvawkharR: an amphibtile species descended from one of the first ancient races to explore and chart the Altarus Star Cluster.

Lt. SssyveKk is the chief of security aboard Nef's supply ship, Dreamer's Burden. A strict but compassionate man, SssyveKk trains his officers to regard every member of the crew with an air of suspicion. No one is beyond scrutiny. No one is ever completely innocent. Everyone has something to hide. When there's a case afoot, you can trust SssyveKk and his security team to get to the bottom of it. "Ssssomeone issss ssssspending the night in the brig!"

Works for me!

BDC41866 gives us more!
-- Posted by Tamer on Sunday, July 24 2016
"Heres a Republic Desert Ops/Urban Ops trooper. I got a couple sets of waterslide decals from Bad Mother customs (awesome for both 3 3/4" and 6" scales), and covered up the Cobra sigil on the armored vest with a Republic one and voila. More to come..."

Another great parts mix!

Star Alien 70 is back with new work...
-- Posted by Tamer on Sunday, July 24 2016
"Hi. I’ve not put anything new up for a while. but I’ve got a few customs I’ve recently completed. So here’s some images, hope you like…

Ellorrs Madak, Bannis Keeg and Danz Borin

Ellorrs Madak: Uses top half of POTJ Ellorrs Madak, with legs from ROTS 34 Clone Pilot. Bannis Keeg: Mainly from ROTS 22 Kit Fisto, plastic skirt replaced with soft goods, and head from POTJ Ellorrs Madak."

Looks like a great update to me!

Great Marvel Reveals...
-- Posted by Tamer on Sunday, July 24 2016
Hasbro is really nailing it lately when it comes to the Marvel Line Up. We have added new Marvel Pics for Guardians of the Galaxy, their Legends Line Up, and their 6" GOTG Line. Lots of custom potential.

I love seeing the comic two packs too. Cmon Hasbro bring those back for Star Wars too!

Anovos announces not at the con deals...
-- Posted by Tamer on Sunday, July 24 2016
"We love meeting fans and talking with customers in person, but we know there are many of you who can't always attend the events where we are exhibiting. To emphasize our belief in "no fan left behind," we are offering discounts good for 10% OFF a huge selection of items---some already offered at reduced cost! Not-at-the-Con Sale runs from July 21, 2016 through July 24, 2016."

That means today is it folks. Guess who used this deal to order a Stormtrooper Kit! Yepper, stay tuned as I start a new custom build!

Nicov55 shares more collaborative work with the Closet Jedi...
-- Posted by Tamer on Sunday, July 24 2016
"My latest modification on the Closet Jedi work. He is the architect, i am merely the decorator. but we work well together."

I can definitely agree with that. So cool!

Mandalore 25 finishes his 196th Custom!
-- Posted by Tamer on Sunday, July 24 2016
"Figure #196, Zora Tunic Link from Ocarina of Time, with Iron Boots, Hookshot, and Bottled Goods. Not as big as others leading up to my 200th figure, but definitely fancy as it is a Figma figure, and I did make the accessories from scratch. The base figure is just a repaint, with the Iron Boots sculpt on. I made the Hookshot out of an IG-88 head, plastic rods, magnets, and some bracelet chain. The hand it stuck on the Hookshot, so you need to switch hands for him not to be holding, but the figure comes with many hands so that's not a problem. It also has an extension piece, where you take off the tip, and put a chain I hardened with superglue in. Inside the bottles (bought them off ebay at like 5 cents per bottle), one has Green potion, achieved by putting clear green paint in the bottle, and the other has a fairy that I made from using clear pink on a small clear plastic sphere, with wings cut from a clear plastic sheet.

The shield I made a while back, and just the shield is available here: http://www.ebay.com/itm/Custom-Legend-of-Zelda-OoT-Figma-Link-action-figure-scale-painted-Mirror-Sheild-/351582295690?hash=item51dbf0168a:g:yEQAAOSwhMFXk7h4"

Looks good to me. Still reeling from that many custom action figures!

Felipe Gomez unhinges my jaw again!
-- Posted by Tamer on Sunday, July 24 2016
Take a look at his Super Star Destroyer work and tell me your mouth isn't hanging open!

Sideshow does an SDCC Deal on First Order Troopers!
-- Posted by Tamer on Sunday, July 24 2016
Use the code "SDCCTROOPERS" right now to receive $25 dollars off your order!

Act fast its only for a limited time. Click here to go get started.

Hot Toys and Sideshow hitting home-runs at SDCC!
-- Posted by Tamer on Saturday, July 23 2016
I am looking at their FB Gallery and just had to share it. Such cool stuff. That EP7 Grand Master Luke just looks fantastic!

Rezakai shares his Gunner!
-- Posted by Tamer on Saturday, July 23 2016
"The day before the contest finishes I get a friend to deliver a rush package w/some parts for this I needed, so after hours of working on it today... here are some pics for my entry.

Figure is a Saga Legends Snowtrooper w/removable helmet.

Chest box is an extention cord plug in plastic prong-hole cover i slit the middle of and added greeblies and touch up with a pen to.

The white tubes from it leading to the back are clear tie-backs that was holding down a Legacy Dewback still in box that I had lying around.

The gun and swing arm are just a standard black series stormtrooper rifle but the "claw" and arm holding it is one of those gawd awful build-a-weapon pieces I cut and glued in a new formation with the gun in the prongs and a wire glued for feed-effect.

The helmet is an AT-AT driver w/a pair of wires in the back to link up to the "ears" and the box in the back is from the clonewars era clone pilot, the front emblem flap is also from the same clone wars pilot helm just cut and glued. Sadly due to the extreme rush of the helm work I only had time to print out a clear sticker for the helm art in as close as I could get it.. normally I'd have it measured and stuff the art was made by me using GIMP v2! cutting and pasting in a furious rush!"

Well he made it in time and it looks fantastic! Remember folks today is the last day to enter your challenge Gunner. Full Details here!

Star-Fall Webcomic Update...
-- Posted by Tamer on Saturday, July 23 2016
"Hey Yarders! After about 2 months in the Star-Fall custom creation laboratory, we're back with 8 more brand new characters! In honor of SDCC we're going to be debuting new figures each night for the next 6 nights in a row!

If you follow us on Facebook, Twitter , or Instagram: @star_fall_productions then chances are you may have seen some sneak preview images of some of our next wave of figures. Now here they are in all their HD glory.

To kick it off we want to introduce the toughest, most heavily armed and armored, ground units the Star-Cavalry has to offer: Siege Marines."

Sounds good to me!

Ron Hembling gives us a second video update!
-- Posted by Tamer on Saturday, July 23 2016
"Hi All,

Done another video and link is below. I do apologize in advance if there are some blurry moments I'm still getting the hang of this video stuff LOL.

Also I was thinking of doing videos from now on as it is a lot quicker, but let me know if you guys would still like pics attached and if so I'll keep doing that as well.

https://www.facebook.com/Hemblecreations-489059647939401/?ref=bookmarks

Ron"

I like pics and video! Nice work Ron. Such a cool set piece. I can imagine how gaga we would all be doing to see that new Imperial Trooper on an AT-ACP Doorway Dio like this.

Dag Marus with a Dagobah Dio...
-- Posted by Tamer on Saturday, July 23 2016
I have finally showcased all the wonderful dios he has shown us so far here at ISY. What a wonderful bit of fun I have had. Click here and then scroll around to see them all!

Hasbro AT-ACP giving me a meh...
-- Posted by Tamer on Saturday, July 23 2016
After the presentation at SDCC yesterday they shared a dio they have created with three of their new walking AT-ACPs.

Now I need to see this in person, but why o why Hasbro wouldn't you have done this up in BAT-AT style. Oh how I miss that particular offering.

The Closet Jedi shares a project on our Facebook Page...
-- Posted by Tamer on Saturday, July 23 2016
As you can see we are talking some TESB here! Gotta love a Star Destroyer Dio!

SDCC Hasbro Star Wars High-Rez Images loaded!
-- Posted by Tamer on Friday, July 22 2016
I will load more as they send em to me folks. Enjoy them and share them around.

Just glorious news indeed for the six inch line up!

Hasbro AT-ACP will hold a few figures!
-- Posted by Tamer on Friday, July 22 2016
It looks like Hasbro has places this out in their display now that the presentation is over. Still kinda meh on it to be honest.

Looks like a cool new Rogue One Trooper though. Looks 5 POA though! Daggone it!

Rogue One AT-ACT in the works!
-- Posted by Tamer on Friday, July 22 2016
Looks like it has walking motion and lights and sounds! More on this as Hasbro makes it available!

Jaina wins the Hasbro Fans Choice Poll!
-- Posted by Tamer on Friday, July 22 2016
Another great EU or wait a minute, Legendary Canon character makes it into action figure form. I love how loyal people are to these characters.

A virtual tour of Sideshow's Star Wars Booth at SDCC!
-- Posted by Tamer on Friday, July 22 2016
"Take a look at some of our coolest Star Wars pieces at our SDCC 2016 Booth!"

Just some gorgeous stuff there!

Sideshow at SDCC!
-- Posted by Tamer on Friday, July 22 2016
"A picture is worth a thousand words right? Well…then this post is going to be approximately 50 Words. We’re just going to be quiet and check back in at the end."

I like it!

Big Bad Toy Store lists great new pre-order and in stock Items we like!
-- Posted by Tamer on Friday, July 22 2016
VITRUVIAN H.A.C.K.S.
From Boss Fight Studio come different waves of Vitruvian H.A.C.K.S. figures! Coral Snake Gorgon and Cursed Spartan are joined by an Athenian Warrior, Green Mamba Gorgon, and Stheno, along with a Racer Gorgon, Myrmidon Warrior, the Disciple of Eurayle, and Stone Fist. It's a battle for the ages! Relive the gruesome conflict with your own Spartans and Gorgons, then use the amazing H.A.C.K.S. system to mix, match and make your own! These figures include accessories and a Boss Fight Figure Stand. $21.99 Each
http://www.bigbadtoystore.com/bbts/search.aspx?search=Vitruvian%20H.A.C.K.S.

WOOD MODEL KITS
Star Wars R2-D2 and a Tie Fighter, Marvel’s Captain America, and Leonardo from Teenage Mutant Ninja Turtles are all available as wood model kits from Insight Editions! These wooden models are easy to assemble and snap together to form dynamic, displayable 3D versions of R2-D2, a Tie Fighter, Captain America, and Leonardo that fans will love. Each wood model kit has an optional guide book to help build and craft your wood model.
http://www.bigbadtoystore.com/bbts/search.aspx?search=wood%20model%20kit

1/10 SCALE STAR WARS CHEWBACCA PREMIUM FIGURE
Standing with his arms raised and crossbow in hand, Sega’s 1/10 scale premium Chewbacca figure from Star Wars is made of PVC and stands 10.25” to the tip of his up raised arm. Each 1/10 scale premium figure have beautifully painted details and are great additions to Star Wars collections. $21.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20wars%201/10%20scale%20premium%20figure%20collection

METAL EARTH MODEL KITS
Fascinations brings you Marvel, DC, Star Wars, and many more Metal Earth Model Kits. Items like Iron Man’s helmet and Batman V Superman Dawn of Justice Bat-Signal are available to build and collect. Superior detail in these DIY models begin as a 6” steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions are included in every package!
http://www.bigbadtoystore.com/bbts/search.aspx?search=metal%20earth%20model%20kit

ALIENS: COLONIAL MARINES ACTION FIGURES
These 1/18 scale Aliens: Colonial Marines action figures by Hiya Toys include the Xenomorphs Boiler, Splitter, and Lurker. Each 4” figure comes with Alien-specific accessories like an egg, Facehug, and 3 sets of hands per Alien. The Boiler Aliens are horribly deformed with boils and forgoes typical melee or spitting attacks, while the Splitter attacks by splitting large quantities of acid at enemies, and Lurkers like to keep their distance before attacking. Each Alien figure are perfect additions to any Alien collection.
http://www.bigbadtoystore.com/bbts/search.aspx?search=hiya

STAR TREK STARSHIPS COLLECTION
Eaglemoss Publications presents this incredible collection of Star Trek models including all the most significant ships from the five Star Trek television series. Every ship has been painstakingly recreated in die-cast, high-quality ABS materials then hand painted with an incredible level of detail. The collection features a full range of Federation and alien vessels including seven incarnations of the Enterprise, all the major Klingon vessels including the Bird-of-Prey, Dominion, Borg, and Romulan ships. $21.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20trek%20starships%20collection

6" Hasbro Astro-Mech 3-Pack now available for order!
-- Posted by Tamer on Friday, July 22 2016
"Build your Star Wars collection with the Astromech Droid 3-Pack from The Black Series!

This collectable showcase of the heroic droids from the Battle of Yavin feature exquisite craftsmanship, multiple points of articulation, and premium detail that only The Black Series from Hasbro and Star Wars can offer.

Featuring authentically-crafted and highly-detailed figures, vehicles, and Force FX Lightsabers, The Black Series from Hasbro embodies the quality and realism loved by Star Wars devotees both young and old.

Expand and enhance your Star Wars collection with this Astromech Droid 3-Pack and other items from The Black Series."

You gotta like the Astros!

A new dio from Dag Marus!
-- Posted by Tamer on Friday, July 22 2016
I am still getting into all of his great dioramas. The latest we are featuring is

his Yavin IV Dio!

Jodo gives us a new chapter!
-- Posted by Tamer on Friday, July 22 2016
Enjoy Era of Darkness VOL 2: Chapter 3"

Lets just say there are shots fired in this one! I always enjoy reading the new chapters!

JDeck is back with a new Raider...
-- Posted by Tamer on Friday, July 22 2016
"TX-1138 aka, "Tex", was an experimental reconnaissance droid developed by the Alliance Intelligence Command. The basic design was a resurrection of the Separatist B2 battle droid, however the central processor had been completely upgraded. TEX was programmed with a library of information, including Star and Planetary maps. As well as blueprints, schematics and readouts for every known Imperial; ship, fighter and ground vehicle. He was also programmed to know all Imperial protocol and decipher Imperial codes. He didn't have much of a personality, he was built to obey orders and relay information he did not feel emotions, or understand figurative language. This was problematic, as he had the tendency to carry out orders to its most literal extent."

I like a droid in this squad!

Darth Streams is putting his new 3D Printer to good use!
-- Posted by Tamer on Friday, July 22 2016
"Here's a t3m4 I printed, took about a day or so on the print bed."

Now that took awhile, but turned out so great!

Ron Hembling shares link for a great 6" Dewback...
-- Posted by Tamer on Friday, July 22 2016
He showed us a work in progress pic of one of these yesterday and I am glad he shared where he found it!

Commander Kurgan contacts EE about their new Astro Pack!
-- Posted by Tamer on Friday, July 22 2016
"You advertised the EE exclusive 6 pack of Star Wars figures with the following words: "stay tuned for our exciting new exclusive Star Wars Black Series action figure 6-pack! It contains 5 never-before-released figures all done with the super-articulation only available in Black Series figures."

This breathtaking set turned out to be Astromech droids.
Can you possibly imagine how disappointing this is to those who have a pretty good understanding of Star Wars action figures, the Black Series and know what super-articulation means among collectors and customizers?"

Click here to see the answer he got back from EE!

A new day and a new dio from Stefan!
-- Posted by Tamer on Friday, July 22 2016
Looks like a First Order Dio this time out!

Star Wars R2-ME2 A Sideshow Exhibition Catalog Star Wars Book...
-- Posted by Tamer on Friday, July 22 2016
"A unique re-imagining of everyone's favorite astromech: R2-D2!

Sideshow is celebrating a galaxy far, far away by challenging artists and dreamers alike to mold their own unique take on one of the most iconic characters from the Star Wars universe - R2-D2. The R2-ME2: A Sideshow Exhibition Catalog represents a collection from talented artists the world over sharing their vision of what can be done with a brave little astromech.

The force is strong with this collective of creative minds from across the galaxy! Starting with a blank prototype of our Deluxe R2-D2 Sixth Scale Figure, Sideshow invited over 90 friends and fans to participate in customizing the iconic droid with a brand new look. Follow along on Instagram with the hashtag #R2ME2."

Seems pretty awesome to me!

Gentle Giant Ltd's 2016 PG Holiday Gift Oferring -- BB-8 Mini Bust...
-- Posted by Tamer on Thursday, July 21 2016

High Rez Images of the EE Astro-Mech Set...
-- Posted by Tamer on Thursday, July 21 2016
I forgot to post these images yesterday (busy day). What a cool set. Here is what you get:

"Star Wars Astromech Droids 3 3/4-Inch Figures - EE Exclusive:
Entertainment Earth Exclusive!

Jabba's bartender was never given an official name in the books or movies, but his design may remind you of some Earth-based beverages. With his drink dispenser, seven glasses, and a tray harness, this never-before-fully-seen droid served aboard Jabba the Hutt's sail barge. Also, if you look to the shadows, you may find him in Return of the Jedi. We recommend skipping the shadows and getting one of our droids to keep on your desk and another in your Jabba's palace dioramas and playsets (sold separately).

Serving the Shadow Squadron during The Clone Wars, R7-F5 appeared briefly in the episode "Shadow of Malevolence." Ideally suited for a Y-Wing bomber, this diminutive orange droid will look fantastic with the rest of your Grand Army of the Republic, or in your droid pool.

Think pink with D-Squad's own KT-QT. Aayla Secura's pink droid had a special magnet and was sent into enemy territory to recover a secret encryption module for the Republic. Take special note of the top of her dome, as there are yellow and black markers indicating where special upgrades were placed during her time as a spy. You can meet her during several episodes of The Clone Wars.

Plo Koon's R7-D4 makes his movie action figure line debut here! He's a dark maroon color with a gray and white highlights. This droid makes six appearances on The Clone Wars.

Everything's gonna be all right with RC-C2 and a moon pie. We expect you may find both in the home of Black Sun crime lord Ziro the Hutt. This dapper dispenser of potent portable potables is decorated with Black Sun tattoos in gray, blue, and red. There are no other robots quite like him in the galaxy, plus he includes everything you need to help aliens get their drink on at a snazzy underground party. You'll find him in The Clone Wars movie, but the toy can only be found here.

Rounding out the collection is R2-A5. If he looks familiar, he should. You first saw him in 1977! This white and green robot was seen rolling around Mos Eisley near Luke's landspeeder when the Imperial Sandtroopers and Stormtroopers came to ask about various droids they were looking for. You know how that story ends, but did you also know that this figure represents a droid design that was removed from the movie during the Special Edition edits of 1997? It's true! Bring home a lost piece of movie history with this remarkable figure and the entire exclusive action figure set."

The Spectre is back with some Custom Gorgons!
-- Posted by Tamer on Thursday, July 21 2016
"Excerpt from "The Galactic Almanac Of Developed Species" (Fourth Edition):

The most elusive sentient species on Tolkien III is the Gorgon race. The Gorgons are an ancient reptilian race that at one point in the planet's distant history ruled the majority of its surface and the races that inhabit it. But that was long ago and the Gorgon empire has been reduced to a pale shadow of its former glory."

And folks that is just the start of his backstory and the pics of the Gorgons are fantastic!

Darth Streams is 3D Printing!
-- Posted by Tamer on Thursday, July 21 2016
"Hello everyone!

I haven't been able to make that much with my full time work and full time school, but soon one of those will be ending (school) so I hopefully will get back into the swing of things. I recently got a 3D printer so just wanted to share some of the stuff I've printed or made with it. The lightsaber is 8 different parts and I found an Stl for it online. The naga Sadow sith pure blood head is sculpted by me in sculptris, converted from obj to Stl, and scaled and converted to gcode (format printer understands) in cura."

Wow, that is so cool. Just print the parts you want! I so think this is the trend of future customizing!

Ron Hembling gives us a video update!
-- Posted by Tamer on Thursday, July 21 2016
"Hi All,

Have started on the AT-AT hull section for my AT-AT gunner, I have used high density foam for the hull then used plastic card to cover the foam.

The gunner's weapon is Bandai with a scope attached using the scope from the Bandai pistol. I still have a few days to detail the hull section and then paint and weather it and the gunner.

Ron"

Wow is that cool! I really like the articulation in that Door Gun! Be sure to give Ron a look on his Facebook Page called Hemble Creations!

Don't forget, there are only a few more days to post your Custom Challenge Gunner!

Dag Marus dio showcase!
-- Posted by Tamer on Thursday, July 21 2016
"Thanks for the welcome guys! I've got plans to upgrade the Hangar Bay stuff to have more movie-esque backgrounds so everything isn't pegboard and plug outlets. I'd like to eventually have sky backdrops to add a bit to the outdoor dioramas as well.

Here's another I got around to uploading.

Emperor's Arrival"

I am still reeling from all the awesome dioramas he has shown us.

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Thursday, July 21 2016
Its Empire Day for Stefan's new dio!

Hot Topic sends me an email on a cool SDCC Exclusive...
-- Posted by Tamer on Thursday, July 21 2016
How can you not like the BB-8 giving you a thumbs up!

Also of note is a pretty cool buy one get one for $5 dollars swimwear. I know those Boba Fett Trunks are a sure fire hit!

Hasbro sends me news of a new SDCC 6" Exclusive!
-- Posted by Tamer on Wednesday, July 20 2016
"Hi Shawn,

Happy Comic-Con!

Amidst all of the San Diego Comic-Con excitement, we are thrilled to share with you the new Hasbro “Rogue One” Black Series SDCC Exclusive.

Please feel free to spread the news and stay tuned for even more Star Wars fun soon.

STAR WARS: THE BLACK SERIES 6-Inch Jyn Erso Pack

(Ages 4 years & up/Approx. Retail Price: $24.99)

Bring the action of the highly anticipated Rogue One: A Star Wars Story film to life with THE BLACK SERIES Jyn Erso Pack! A highly skilled soldier in the Rebel Alliance, Jyn Erso is an impetuous, defiant warrior eager to bring the battle to the Empire. This impressive 6-inch scale figure features extensive articulation and realistic character design."

That sure works for me. I will get you more news as I get it folks! Click here to see the full One Sheet of all of Hasbro's SDCC Star Wars Exclusives.

EE sheds Astro-Mech Light on Mystery Figures...
-- Posted by Tamer on Wednesday, July 20 2016
"Star Wars Astromech Droids 3 3/4-Inch Figures - EE Exclusive:
Entertainment Earth Exclusive!

Among our most beloved exclusive action figure sets were two classic packages of droids, so on the 10th anniversary of their release we conspired with Hasbro to bring you even more robot action!

Six awesome robots from Star Wars, Return of the Jedi, and The Clone Wars!

These figures come packaged in an out-of-this-world R2-D2 shaped box straight out of the droid foundries of Industrial Automaton.

Both Jabba's bartender and RC-C2 include a drink dispenser, drink tray harness, and seven glasses for your alien figures!

All six robots boast fantastic rolling wheels!

Entertainment Earth Exclusive! The droids you are looking for are here. Celebrating the entire Star Wars saga and the 10th anniversary of our super-popular, sold-out, 2006 exclusive astromech droid sets, this amazing new Star Wars action figure gift set will knock your socks off! The sextet of astromech droids comes to you in a specially designed R2-D2-shaped box featuring these six 3 3/4 -inch scale action figures. Each droid sports multiple points of articulation, similar to the collector-favorite figures of The Vintage Collection. Dating back as early as the 1977 version of the original Star Wars movie, and all the way to the recent The Clone Wars animated series, this set has robots with personality you won't want to live without. Each figure includes rolling wheels on their feet, plus jointed domes, ankles, shoulders, and maybe even a few other surprises.

Jabba's bartender was never given an official name in the books or movies, but his design may remind you of some Earth-based beverages. With his drink dispenser, seven glasses, and a tray harness, this never-before-fully-seen droid served aboard Jabba the Hutt's sail barge. Also, if you look to the shadows, you may find him in Return of the Jedi. We recommend skipping the shadows and getting one of our droids to keep on your desk and another in your Jabba's palace dioramas and playsets (sold separately).

Serving the Shadow Squadron during The Clone Wars, R7-F5 appeared briefly in the episode "Shadow of Malevolence." Ideally suited for a Y-Wing bomber, this diminutive orange droid will look fantastic with the rest of your Grand Army of the Republic, or in your droid pool.

Think pink with D-Squad's own KT-QT. Aayla Secura's pink droid had a special magnet and was sent into enemy territory to recover a secret encryption module for the Republic. Take special note of the top of her dome, as there are yellow and black markers indicating where special upgrades were placed during her time as a spy. You can meet her during several episodes of The Clone Wars.

Plo Koon's R7-D4 makes his movie action figure line debut here! He's a dark maroon color with a gray and white highlights. This droid makes six appearances on The Clone Wars.

Everything's gonna be all right with RC-C2 and a moon pie. We expect you may find both in the home of Black Sun crime lord Ziro the Hutt. This dapper dispenser of potent portable potables is decorated with Black Sun tattoos in gray, blue, and red. There are no other robots quite like him in the galaxy, plus he includes everything you need to help aliens get their drink on at a snazzy underground party. You'll find him in The Clone Wars movie, but the toy can only be found here.

Rounding out the collection is R2-A5. If he looks familiar, he should. You first saw him in 1977! This white and green robot was seen rolling around Mos Eisley near Luke's landspeeder when the Imperial Sandtroopers and Stormtroopers came to ask about various droids they were looking for. You know how that story ends, but did you also know that this figure represents a droid design that was removed from the movie during the Special Edition edits of 1997? It's true! Bring home a lost piece of movie history with this remarkable figure and the entire exclusive action figure set.

We reserve the right to limit quantities ordered."

They look pretty sweet to me!

Entertainment Earth shares new Star Wars Mystery Set!
-- Posted by Tamer on Wednesday, July 20 2016
"Star Wars Mystery 3 3/4-Inch Figures - EE Exclusive:

Six awesome new 3 3/4-inch scale action figures, with five characters making their toy debut!

Figures include cool accessories and have the level of articulation you've come to love from The Vintage Collection and The Black Series.

Exclusive boxed set features a brand-new never-before-seen display box!

Stay tuned for the full reveal!

Entertainment Earth Exclusive! From Tatooine to Coruscant, this exclusive is about to land on Earth! Details regarding this amazing item are yet to come, but you need to pre-order yours right now. The boxed set features a gorgeous display box unlike anything Hasbro has ever done before, and it brings you six 3 3/4-inch scale action figures making their movie-style figure debut. Five of these figures have never been made as toys! The characters date back as far as the original Star Wars movie and span the saga's rich history, bringing home a diverse range of interesting dudes. These plastic pals will be revealed in full by Hasbro at Comic-Con International in San Diego this week, and we know they will make all the diodes down your left side tingle!

We reserve the right to limit quantities ordered."

Look for us to feature the full reveal sent by EE very soon!

Steezy Collector is back with a new Mando...
-- Posted by Tamer on Wednesday, July 20 2016
"Finished up Tor Vizsla to add to my Mando shelf. I plan to make him an unhelmeted head in the future too. Looks great next to Montross and Jaster Mer."

Sounds like a great plan to me.

BDC41866 is back with more to come!
-- Posted by Tamer on Wednesday, July 20 2016
"Havent posted in awhile. Stoked from all the new Rogue One and Rebels footage. Here is a Weequay Old Republic military officer...More to come..."

I always like reading that last part. I like his Weequay too.

Felipe Gomez unhinges my jaw!
-- Posted by Tamer on Wednesday, July 20 2016
And first thing in the morning too. I don't know what I am gonna do for the rest of the day.

Needless to say I think his Star Destroyer Works In Progress and out of sight!

Darth Daddy shares on our Facebook Page...
-- Posted by Tamer on Wednesday, July 20 2016
Looks like he is working on Hera's Dad! He is still calling it a wip, but I think it already looks great.

Customizing the Clone Wars - Episode 13!
-- Posted by Tamer on Wednesday, July 20 2016
Looks like a double dose of Ryloth this time out!

Hot Toys sends news on Cosbaby Bobble Heads!
-- Posted by Tamer on Wednesday, July 20 2016
"Hot Toys’ Cosbaby series have been very popular among fans and collectors of adorable and stylized characters over the years. Following the success of the first waves of Cosbaby Bobble-Heads based on Star Wars: The Force Awakens, Hot Toys is pleased to expand the series by introducing a new wave of Star Wars Cosbaby Bobble-Heads based on the classic Star Wars trilogy!

This series will star the iconic Darth Vader, Stormtrooper, Boba Fett, TIE Pilot, AT-AT Driver, and Scout Trooper in stylish and delightful baby form with each Cosbaby Bobble-Head standing approximately 11cm tall with base.

A collectible set of 6 will also be available and Darth Vader will be exclusively featured in a Force-using pose!

Star Wars fanatics and fans of stylized collectibles shouldn’t miss the chance to add these new Cosbabies to your collection!

Special Features:

-Star Wars characters in stylized baby form

-Approximately 11cm tall with base

-Non-articulated figure with bobble-head

Release date: Q4, 2016 – Q1, 2017

"

Of course we will feature the pre-order info when these go live!

Please vote for the Hasbro Fans Choice Poll!
-- Posted by Tamer on Tuesday, July 19 2016
"Which icon of a galaxy far, far away will be the next to join Hasbro’s critically-acclaimed, highly-detailed Star Wars: The Black Series line of 6-inch figures? You decide — starting now!

The results are in from qualifying-round polls at Star Wars fan sites in Hasbro’s Star Wars Fan Figure Vote — where you get to choose which Star Wars character will be made into an action figure — and you can now cast your vote to decide the winner. Last year, fans picked Revan, and runner-up Sabine is also set to join the Black Series. The finalists this year, seen below, come from across the saga and across mediums: video games, The Clone Wars animated series, Legends stories, and more. (Unfortunately, no Kitster. Again…) This’ll be a tough one, but to quote Darth Sidious, “You must choose!”

The poll will be open right up until Hasbro’s San Diego Comic-Con Star Wars panel on Friday, July 22, at 12 p.m. PT, where a winner will be announced. Until then, exercise your galactic right and vote!"

I couldn't agree more!

Bronxstalker is back with a new Mando...
-- Posted by Tamer on Tuesday, July 19 2016
"Here goes another Mando I worked on. I have a few others that I'll post, and then I'll try to stray away from mandos and do something different. Like, I'm currently working on another Darth Sion as well as a Savage Oppress. I also have clones in the works (both 6" and 3.75")."

I really like the color scheme on this Mando. His versions seem so tough which is what I expect from the Mandalorians. Click here to go add this one to your own collection.

Stan is back with an update...
-- Posted by Tamer on Tuesday, July 19 2016
"Now, General Madine take a sit in the rebellion. He loaded with a soft good skirt, ball joint knees and ankles, shoulders, and head. His color are now movie accurate as well."

I like the looks of this one. The soft goods application is superb.

Remco cosplays at Celebration London!
-- Posted by Tamer on Tuesday, July 19 2016
"So I'm back home from what was all in all another great European SW Celebration! I was also present at the first SWCE, back in 2007, which was also in London. However, I was there only for one day. In 2013, as some of you know, I went to Essen, Germany, to attend all three days.

The big difference between Essen '13 and London '16 is that London had a lot more visitors, making it more difficult to see everything one wanted to see. I didn't take as many pictures as i did in Germany, but that's also because I decided to do a cosplay of some sorts. I recently bought an EFX ST helmet and ordered a pristine white business suit. The suit is still on its way, but I happened to have a black suit as a backup."

It looks like great fun and I am anxious to see what else he shares from his trip.

Felipe Gomez astounds me this morning!
-- Posted by Tamer on Tuesday, July 19 2016
"11 inch articulated styrene & construction board model."

His AT-SE is just a marvel of intricacy and detail folks. I sat mesmerized through two viewings of this so far.

John Graeber shares a great dio too...
-- Posted by Tamer on Tuesday, July 19 2016
On https://www.facebook.com/imperialshipyards.net/our Facebook Page this morning I found a dio by John where Vader and Thrawn are receiving orders from a Holographic Lit up Emperor. Very cool!

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Tuesday, July 19 2016
Well its a new day. Its an Empire themed dio this time out.

Star Wars Rebels Season Three Trailer (Official)
-- Posted by Tamer on Monday, July 18 2016
"Get your first look at the new season of Star Wars Rebels, featuring the return of characters both new and familiar from both sides of the rebellion."

I can't wait till the new season! I mean we get Mandos, Ezra with Darth Maul, Walkers, and of course Grand Admiral Thrawn!

Questions are in!
-- Posted by Tamer on Monday, July 18 2016
We have finalized the questions list for the latest Q and A Session we will be doing with Hasbro this SDCC. Take a look to see the full question list here.

Thank You for those who took the time to write questions and we look forward to hearing how Hasbro answers!

Jon K is back with a new KOTOR2 Custom...
-- Posted by Tamer on Monday, July 18 2016
"Here's Atton Rand and a quick G0-T0 from KOTOR2. I've had Atton 90% finished for ages, but was having a hard time finding a head I liked. I'm pretty happy with the likeness, took me forever to find the right parts for his weird triple shoulder vest thing.

Atton recipe:
Talon Karrde torso, legs and jacket, with the torso reworked in greenstuff for the shirt flaps.
TVC Nikto arms
GI Joe Retaliation Mouse head
30th Anniversary AT-RT driver hands

G0-T0 is made from the POTF2 IT-O Interrogation droid, hacked apart, holes patched and flipped over with new, more minimal tools added to look more like the droid from the game."

Talk about a great recipe for both figures. They look awesome!

William shares K2SO...
-- Posted by Tamer on Monday, July 18 2016
This is the first custom droid of this one I have seen. I knew it was only a matter of time. It looks spot on to me!

The Closet Jedi starts a great Web-Comic!
-- Posted by Tamer on Monday, July 18 2016
He is leading us up to the events of Rogue One! I think it looks great!

Its a new day and a new dio from Stefan!
-- Posted by Tamer on Monday, July 18 2016
He is back with a new dio. This time out we see a Convoy Ambush!

The Hot Toys Rey is up for pre-order!
-- Posted by Tamer on Monday, July 18 2016
"In Star Wars: The Force Awakens, fans were introduced to our new heroine Rey and her incredible journey in assisting the Resistance to stop the First Order’s menacing plan and find the legendary Luke Skywalker.

In honor of the 2016 Star Wars Celebration, Sideshow and Hot Toys are delighted to celebrate this special occasion and are excited to introduce a new exclusive sixth scale collectible figure of the beloved Rey in her new Resistance outfit as seen in the epic moment of the film where we meet Luke Skywalker once again.

The highly-accurate collectible figure is specially crafted based on the image of Daisy Ridley as Rey in Star Wars: The Force Awakens featuring the highly detailed head sculpt, meticulously tailored outfit as seen in the final scenes of the film, Rey’s signature staff, a blaster pistol, Luke Skywalker’s lightsaber hilt, and a hexagonal figure stand with the Resistance’s emblem."

She looks spot on to me!

Its Day 3 of Celebration London!
-- Posted by Tamer on Sunday, July 17 2016
Join the Official Site as they share their Day 3 Coverage of Celebration Europe.

Its is great to follow along and see what is happening over there!

Ron Hembling shares wip for the latest challenge...
-- Posted by Tamer on Sunday, July 17 2016
"Hi All,

My entry will be a AT-AT Gunner - Battle for Jakku

I just started it this morning and the figure is 50% done, I need to add some more detail and then paint him and then make the base.

Ron"

Don't forget to check out the full details for our latest custom challenge. The submission date is fast approaching! Time to get to building Yarders.

Dag Marus shows us his Battle of Endor Dio...
-- Posted by Tamer on Sunday, July 17 2016
"This one is still a bit in progress, as there will be more Forest a bit further back and I want to add more standing trees when I do manage to find time."

It looks pretty fantastic to me. Action everywhere!

JDeck is back with a new Raider...
-- Posted by Tamer on Sunday, July 17 2016
"Sergeant Elven Vazali. Like many Duro's, Vazali was a pacifist, he did not belive in war. He soon realized if no one fought for freedom, it can be easily taken away. Vazali grew up in an Aristocratic home, his Grandfather took him on many big game hunting expeditions, there he learned the skills and discipline needed to become the best marksman in the Alliance."

As you can see he looks right at home with the squad. Make sure you scroll through and see the recipe.

Steezy Collector is back with a new custom...
-- Posted by Tamer on Sunday, July 17 2016
"Another custom Mandalorian to add to the collection!"

Read on through for the full recipe. I do like the tough look of this one.

Clone Wars Fan 2011 finishes his latest Clone Trooper Custom...
-- Posted by Tamer on Sunday, July 17 2016
"Well at long last, it took a bit longer than i thought it would but here it is, Concept art ARC Trooper Echo!"

I really like the double rangefinder!

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Sunday, July 17 2016
I have to wonder how many dios he has! He has been posting a new one a day for what seems like almost a month now.

Tomorrow is the last day for SDCC Questions to Hasbro!q
-- Posted by Tamer on Saturday, July 16 2016
We are almost set for our latest Hasbro Question and Answer Session this SDCC! So, tomorrow, Sunday at noon eastern we will close the submission thread.

Remember, this isn't a bash Hasbro affair. We will ask hard questions, just not flaming ones!

Catch the Celebration London Livestream!
-- Posted by Tamer on Saturday, July 16 2016
The livestreaming started four hours ago, but this is the official source to get full convention coverage of Celebration London.

I don't know how they are gonna beat yesterday's coverage, but we will just have to wait and see. Enjoy yourself like I plan too!

Dag Marus shows us his Collection Room...
-- Posted by Tamer on Saturday, July 16 2016
"These were taken a few months ago, but not much has changed, aside from the Rey diorama being completed."

I love all the different genres here. What a great series of rooms!

Gold Leader One is back with a Chewie Update...
-- Posted by Tamer on Saturday, July 16 2016
"I started working on a super articulated Chewbacca figure from TFA today. It's practically done, I just would like to get a lighter brown and go over it in some areas. The body of the figure is from the Early Bird Revenge of the Sith set. What I did was I dry brushed with a dark brown, painting over the Kashyyyk paint job. I used the boil and pop method to remove the head. I trimmed the peg down and popped the TFA Chewie head on."

Make sure you click the link to see the recipe. I think he turned out great!

Have you seen Dag Marus' Dios yet?
-- Posted by Tamer on Saturday, July 16 2016
He is a brand new Yarder, but you can see he has been building dios for awhile.

Yesterday we featured his Rey's Home Dio, but I had to get his Hoth One up for show too. I think it looks great. Just a ton of action.

Make sure you scroll up and down as there are tons and tons of pics and new works in progress, etc!

Sjefke is back with a great new custom gal...
-- Posted by Tamer on Saturday, July 16 2016
"Here's another of the ladies that CloneCrazy commissioned. This one is Queen Talia. CC wanted her to look like Evanora from Oz the Great and Powerful

I used Marvel Universe, Sue Richards as the base figure. I casted the head of Depa Billaba and sculpted a very intricate hair piece. All the bobs are ink ideally sculpted and attached to the head with fabric covered elastic, which allows full range of motion of the head. They're basically address label elastics so from the airport. I had to grind down her chest (she still looks like Dolly Parton).

I'm really proud of the soft goods. The dress is the finger of a green nitrile glove which I slipped over her legs. The belt is all sculpted. The collar is all black feathers. I made emeralds with 2 component resin mixed with a little emerald paint and green sparkles. Each one is a tiny, smaller than a millimeter drop. Finally, the emerald necklace is a separate piece complete with a fine silver metal wire as the chain and a staple clip as the setting.

That's it for now. The Red Witch is next, but she's got some really fun features that CloneCrazy hasn't revealed yet, so patience."

Talk about some fantastic work on this one. Awesome job Sjefke!

Commander Kurgan is back!
-- Posted by Tamer on Saturday, July 16 2016
"Continuing with the Rogue One theme, here's another early Rebellion era Alliance fighter."

He looks perfect to me!

The Closet Jedi shares progress on his SD Project...
-- Posted by Tamer on Saturday, July 16 2016
"So my star destroyer project is coming out very nicely. I laid it out so there is room for both “pits”. This means the window needs to be large enough for the pits to fit in front of the Window. Also had to make sure the window openings were large enough to seem in scale with the figures.

The “Pits” are ready to be printed and made. The designs are good and were not difficult to design.

The window is a lot more complicated. Not sure if the perspective of the image is realistic or some sort of “fisheye lens Effect” I have modeled the window to be straight up and down. I can always change its orientation towards the end once all of the other details have been finalized.

Expect a major update next week with some pieces already 3d printed."

It looks like it is gonna be awesome.

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Saturday, July 16 2016
He is back again. I really am enjoying his dio work.

Some Hasbro reveals...
-- Posted by Tamer on Saturday, July 16 2016
Once again a great gallery of what they have shown at C London courtesy of Jedi Temple Archives. I love that pic of the Driver!

Celebration London Set Pics!
-- Posted by Tamer on Saturday, July 16 2016
Our friends at Jedi Temple Archives are getting some great images of Celebration London!

Anovos announces not at the con sale...
-- Posted by Tamer on Saturday, July 16 2016
"We realize that not everyone could make it to Star Wars Celebration Europe this weekend so we're offering 10% OFF select Star Wars items for online purchases with checkout code SWCE2016! Shop now!‪‬"

I like the way they think! Maybe this will make me bit on my Stormtrooper Outfit?

First Hasbro Rogue One offering unveiled at Celebration!
-- Posted by Tamer on Friday, July 15 2016
"Revealed today in London during the “Rogue One: A Star Wars Story” cast panel at Star Wars Celebration was Hasbro’s Star Wars Black Series “Jyn Erso” action figure — the first of new “Rogue One” products to be seen publicly. The 6-inch figure was revealed by Jyn herself – played by Felicity Jones – with panel moderator, Gwendoline Christie who welcomed Felicity to the action figure club. “Jyn” will be represented across a variety of products – something fans will have to wait and see for themselves later this year, when all new “Rogue One” products launch globally at retail."

That is the official word from Hasbro!

Tweets by @The_Shipyards

What will Mr. Black show us next?
-- Posted by Tamer on Friday, July 15 2016
As you can see our pal Remco is having a great time at Celebration London. Stay tuned to our Twitter Feed ( and here of course) as we share the latest news and nuggets he gleans from the show. And thanks for sharing your trip with us Remco!

New Behind the Scenes Footage of Rogue One!
-- Posted by Tamer on Friday, July 15 2016
"Go behind the scenes with the cast and crew of Rogue One: A Star Wars Story."

I am gonna have a hard time waiting till December!

EE creates a deal in honor of new Rogue One Trailer!
-- Posted by Tamer on Friday, July 15 2016
"In honor of the new Rogue One trailer, we’re going to have a sale on some of our Star Wars exclusives!

We have 3 bundles:
http://www.entertainmentearth.com/prodinfo.asp?
number=HSB4007BUN1
· Star Wars The Black Series Imperial Forces 6-Inch Action Figures
· Star Wars The Force Awakens Desert Assault Walker with 3 3/4-Inch First Order Stormtrooper Officer
· Star Wars Jabba's Palace Nesting Dolls

http://www.entertainmentearth.com/prodinfo.asp?
number=HSB4007BUN2
· Star Wars The Force Awakens Desert Assault Walker with 3 3/4-Inch First Order Stormtrooper Officer
· Star Wars Jabba's Palace Nesting Dolls

http://www.entertainmentearth.com/prodinfo.asp?
number=HSB4007BUN3
· Star Wars The Black Series Imperial Forces 6-Inch Action Figures
· Star Wars The Force Awakens Desert Assault Walker with 3 3/4-Inch First Order Stormtrooper Officer"

Now that is the way to celebrate!

Livestreaming from Celebration London!
-- Posted by Tamer on Friday, July 15 2016
Starwars.com is live streaming portions of the event! Just push the play button and your are live!

Go to their YouTube Channel to see the live streaming schedule.

And of course we will be posting the new Rogue One Trailer coming later today!

Dag Marus shows up with some great dioramas!
-- Posted by Tamer on Friday, July 15 2016
"Started this a few months ago and love how it turned out. I'm working with a friend to have new footcups 3d printed so it isn't just cardboard inserts giving the appearance. At some point, if I can spare the scratch for it, I'd love to add the missing AT-AT hatches. (I got this one for super cheap as it was pretty much bare bones).

Trust me that is but one of two other great dioramas he has posted. Now that is the way to introduce yourself!

Big Bad Toy Store lists great new pre-order and in stock Items we like!
-- Posted by Tamer on Thursday, July 14 2016
NEW STAR WARS KITCHENWARE
Star Wars Death Star toaster, waffle maker, and popcorn machine, BB-8 waffle maker, Anakin Skywalker handheld blender, and lightsaber salt and pepper grinders are all new kitchenware brought to you by Pangea Brands! These Star Wars brand kitchen utensils and machinery not only make the perfect additions to your collection, but they’re also incredibly useful around your kitchen.
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20wars%20kitchenware

DC TELEVISION FIGURES
DC Collectibles has announced eight brand new figures spanning four of the popular DC series from the CW. From arrow there is Vixen and Constantine and from The Flash we have Zoom. Also included are Supergirl and Martian Manhunter from the Supergirl series and from Legends of Tomorrow are Firestorm, Hawkgirl, and The Atom. Each figure stands 6 inches tall, features multiple points of articulation, and come with accessories.
http://www.bigbadtoystore.com/bbts/list.aspx?list=21314

NEW FUNKO
Funko presents new Jumbo Pop! and 3.75” Pop! Plushes; Marvel, DC, Game of Thrones, and more are now available from Funko’s Pocket Pop! collectible miniaturized Pop!s line; Golden Age The Flash gets his own Dorbz and from their DC Heroes line comes a new The Dark Knight Returns Pop!, Superman! Each Pocket Pop! are mini Pop!s that fit in your pocket and come as a key chain. New Spider-Gwen, Deadpool, and other Jumbo and regular-sized Pop! Plush are available for preorder. The Golden Age Flash Dorbz features his winged helmet and is limited, as is the Superman PX Previews Exclusive Pop! figure. Don’t miss out on these new Funko Pop! exclusives, Pop! Plushes, and Pocket Pops!
http://www.bigbadtoystore.com/bbts/search.aspx?search=funko%20pop

LAUREL WORKER UNCLE KUNIO VERSION BBTS EXCLUSIVE
The Laurel Worker Uncle Kunio Version is a BBTS Exclusive by Ori Toy. This figure is a 1/18 fully painted military heavy artillery armor suit with highly detailed weathering effect. The cockpit is highly detailed with linkage mechanic structure, built to accommodate the included Pilot figure and can fit any other 1/18 figures.
http://www.bigbadtoystore.com/bbts/search.aspx?search=acid%20rain

NEW FUNKO
New Funko Pop! figures like Kylo Ren and Luke Skywalker from Star Wars, and Marvel’s Spider-Gwen are all now available! Each 3.75” figure is made of vinyl and shaped in the signature Funko Pop! sculpts. They also come in window-box packaging for easy display. Grab these highly collectible figures today!
http://www.bigbadtoystore.com/bbts/list.aspx?list=18570

Sideshow has one more 1/6 Scale announcement...
-- Posted by Tamer on Thursday, July 14 2016
"Han Solo in Carbonite Sixth Scale Figure

Sideshow will be offering a unique figure that will not only highlight your Star Wars™ collection, but will also highlight your Bounty Hunters as their prized possession. The Han Solo in Carbonite Sixth Scale Figure is coming soon to Sideshow, so check back for more updates!"

Wow, two great sixth scale announcements in just one day. Look for the pre-order links here soon!

Sideshow announces 1/6 Scale Dengar!
-- Posted by Tamer on Thursday, July 14 2016
"Dengar Sixth Scale Figure

Another wretched member of scum and villainy is coming to Sideshow. Star Wars™ fans will have an opportunity to collect the Dengar Sixth Scale figure, coming soon so check back for more updates!"

Of course we will feature the pre-order when this goes live! And stay tuned we have one more SSC announcement.

Bronxstalker is back with a Mando...
-- Posted by Tamer on Thursday, July 14 2016
"Another Mando I completed a few weeks ago, but didn't have a chance to post due to busy work schedule. I have a few others I finished, and am finishing up on, and will post those soon as well."

Wow, I really like this one. Matter of fact if you like this one too and would like to own it, click here for his eBay Auction Link.

Stronox makes the ultimate Thrawn!
-- Posted by Tamer on Thursday, July 14 2016
"This is a recent commission I just finished up. I combined parts from the Vintage Collection Quinlan Vos to give Thrawn more height (as he should be 1.8 m tall) and also the added hip articulation. I then made sure to replace the tiny upper arms with better ones as well for good proportions. I created the epaulettes in a way so that there would be no rubbing as well. Painted everything per the customer's requests and voila! My client is uber excited as am I that he gets to have a one of a kind creation of his favorite character!"

If I were the customer I would be pretty happy too. This has to be the ultimate version of this character. Oh Hasbro! Take some notes here please!

Stan is back with some molding news...
-- Posted by Tamer on Thursday, July 14 2016
"Well the molds are done On Tzzivvt, I am waiting for color pigment to come in; I can color The headsculpt dark maroon. If anybody is interested in a headsculpt shoot me a pm. By next week this headsculpt will be ready."

I think its awesome he is offering this to the Yarders. Thanks Stan!

JDeck gives us a new Raider!
-- Posted by Tamer on Thursday, July 14 2016
"Corporal Gorf Timrek (right in the above image), was an Ishi Tib explosives expert. To say he was a pyromaniac would be an understatement. He very rarely used a blaster due to loss of dexterity in his shooting hand during an explosives incident. His boisterous personality would lend comic relief to stressful situations, but it could get annoying at times.

Pretty simple figure POTF2 Ishi Tib+ TLC Major Panno. He reminds me of a cross between Kermit the frog and Clint Eastwood. I added a poncho, bandolier with proximity mines, and a soft goods bag that holds three explosive charges. I soaked the poncho in a water/PVA glue mixture so it clings better, for a realistic look."

I had to include the image he used for all three of his latest custom figures as I thought it was one cool shot.

Kartoonister shares a Cobra Update...
-- Posted by Tamer on Thursday, July 14 2016
He shares his custom Cobra Desert tracker/mercenary. Filename : Kubra, Ali. I like him!

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Thursday, July 14 2016
This time out we see an Imperial Army Invasion!

We start of with FB Updates...
-- Posted by Tamer on Thursday, July 14 2016
Thank the Maker shared his old SW Collection Room. Wow, looks good to me!

Hasbro's Star Wars #HasbroToyPic Finalists Announced!
-- Posted by Tamer on Wednesday, July 13 2016
"Hi Star Wars Fans!

We’re thrilled to announce that Hasbro has chosen their top 24 final images from their Star Wars #HasbroToyPic fan activation program launched earlier this year. To refresh your memory, Hasbro and @sgtbananas teamed up to reach the fan community and have them show off their amazing collections and creativity by recreating scenes from the film using Hasbro’s Star Wars figures and vehicles.

Out of hundreds of stunning submissions, Hasbro has announced the final 24 winners chosen! You can take a look at all of the final images chosen to be displayed at the Hasbro booth at San-Diego Comic-Con in the document attached (listed in alphabetical order), and download the hi-res images here. We also included some bonus images @sgtbananas created as the ambassador of Hasbro’s successful #HasbroToyPic program!

Please feel free to share these with your readers and don’t hesitate to let me know if you have any questions! We have plenty more Hasbro Star Wars news and updates leading up to the con, so please stay tuned."

Click here to see the document described above. And congratulations to the winners!

2016 SDCC Exclusive - Captain Phasma Mini Bust!
-- Posted by Tamer on Wednesday, July 13 2016

Time is running out to get your Q's in for Hasbro!
-- Posted by Tamer on Wednesday, July 13 2016
I will need time to get the questions sorted and arranged for Todd to get em posed in our latest Hasbro Question and Answer Session this SDCC! So, Sunday at noon eastern will be the submission date.

Remember, this isn't a bash Hasbro affair. Sometimes I think we are a sorted lot who are quick to criticize and while there is always room for improvement, we do not want to pummel Hasbro who was kind enough to grant our question request. We will ask hard questions, just not flaming ones!

>

Ron Hembling showcases his Death Star Light...
-- Posted by Tamer on Wednesday, July 13 2016
"Hi All,

Here are the usual outdoor pics of both the DS Light and Damaged Freddy.

Freddy was finally given a little weathering using pastel chalks.

Ron"

I really enjoyed this project!

Its a new episode of Customizing the Clone Wars...
-- Posted by Tamer on Wednesday, July 13 2016
Peakob1 and Darth Daddy are back with a new installment. This time out they are discussing "Storm Over Ryloth".

Thank The Maker shares cool Facebook Gallery...
-- Posted by Tamer on Wednesday, July 13 2016
Once again our Facebook Page is super active. Be sure to stop by.

Its a new day and a new dio from Stefan!
-- Posted by Tamer on Wednesday, July 13 2016
He is keeping our Facebook Page hopping!

Ron Hembling finishes his FNAF Freddy...
-- Posted by Tamer on Wednesday, July 13 2016
"Damaged Freddy."

What a cool project. Ron never ceases to amaze. And hold on as we have another Hemble Creations Feature too.

Entertainment Earths gets Vac Metal Gold C3PO Exclusive!
-- Posted by Tamer on Tuesday, July 12 2016
"Star Wars: TFA Deluxe C-3PO Figure - Convention Exclusive:

"You probably don't recognize me with my red arm."

Exclusive limited edition chrome C-3PO action figure!
Fresh from the Battle of Takodana in Star Wars: The Force Awakens.

First-ever C-3PO action figure at this scale with his classic reflective finish!

The protocol droid stands 18-inches tall.

He's shiny and gold, just like in the movies!

Entertainment Earth Convention Exclusive! From Jakks Pacific's Big Fig 20-inch scale collection - and available only at the Entertainment Earth booth #2343 at San Diego Comic-Con International 2016 - this limited edition Star Wars: The Force Awakens Premium Edition Vac-Metal C-3PO 18-Inch Big Figs(TM) Action Figure - Convention Exclusive is a shiny gold robot boasting 7-points of articulation. His chrome finish is as shiny as you please, with a red arm to honor his fallen friend from the days following his adventures on Endor. C-3PO comes packaged in an amazing premium edition box featuring an exquisite Resistance symbol backdrop and gold foil highlights.

At 18-inches tall, this Entertainment Earth Exclusive is the first time a C-3PO action figure has been offered with his classic reflective finish at this scale. It's like a mini-replica of the suit Anthony Daniels wears in the film, so you can almost hear his voice in your head! You'll thank Jakks when you bring home this Resistance spymaster and famous translator.

NOTE: This item will only be sold at San Diego Comic-Con 2016 at the Entertainment Earth booth #2343. It will not be for sale on our website at any time."

Why can't we get them to give this paint treatment to the new 6" Figure. It sure looks perfect to me! I might pose that as a Hasbro Question!

Ron Hembling almost done his FNAF Project...
-- Posted by Tamer on Tuesday, July 12 2016
"Hi All,

FNAF Freddy is 95% complete I just have to weather him and the base. The base is just some thick foam board and the figure and base where painted using Vallejo paints.

Ron"

What more can I say about Ron? His stuff is always fantastic!

Sjefke is back with an update!
-- Posted by Tamer on Tuesday, July 12 2016
"Hey Yarders

I've been between residences for the last few months, so all my stuff has been boxed up, but I have been sitting pics of a few customs that I didn't want to reveal until CloneCrazy posted his latest PN Will of the Force, chapter Friends and Foes.

Here is the first of several featured Force sensitive females. This one was inspired by a Jedi I saw on DeviantArt.

The base figure is a ScarJo Black Widow, with the head of On Stranger Tides, Penelope Cruz. I sculpted the tunic and the waist wrap with green stuff. The skirt is blue nitrile. Her mantle is a coarse black cloth, secured in place with Locktite flexible glue."

JDeck finishes his Rebel AT-RT!
-- Posted by Tamer on Tuesday, July 12 2016
"I made the Rebel AT-RT rider. Her name is Vero Nikta, at a young age she was involved with the Free Ryloth movement. She had become a proficient systems hacker and saboteur. She was also quite well at stealing Imperial vehicles. Her vehicle of choice is an AT-RT she had stolen from Ryloth's Imperial Patrol Unit. Eventually she was sought out by Major Panno himself to join the Raiders. She plays a vital role in the squad as a hacker, when the team needs access codes, or intelligence for covert operations."

She sure looks perfect for that AT-RT to me!

JDeck fills us in on new kits coming from Bandai!
-- Posted by Tamer on Tuesday, July 12 2016
"Official images of the Bandai TIE Interceptor. It has the ROTJ blue tint unlike the previous ANH kits. I'm still hoping for a TIE bomber, that would complete the OT TIEs."

I so agree on that TIE Bomber, but the Interceptor looks good!

The results of the Hasbro Fans Choice Poll are in!
-- Posted by Tamer on Monday, July 11 2016
Well the voting is over and the top 6 Choices have been emailed to Hasbro (and on time too I might note!). Click on through to see who made the cut.

Look for us to feature the poll, live at Starwars.com later this week for the final vote whose results will be shared during the Hasbro Panel at SDCC!

New Jango Fett Premium Format previewed at SDCC by Sideshow!
-- Posted by Tamer on Monday, July 11 2016
"Jango Fett Premium Format Figure

The father of Boba Fett and equally accomplished bounty hunter will be joining Sideshow Collectibles line-up of Star Wars collectibles. The Jango Fett Premium Format™ Figure will be available fore Pre-Order in the future, so stay tuned for updates!"

He looks great to me.

Jedi Minstrel gives us a What If...
-- Posted by Tamer on Monday, July 11 2016
"Here's a "What if"

Aurra Sing was once a padawan that thru tragedies and misfortune, became a successful bounty hunter. In this alternate history, she overcomes tragedy and continues on the path of the Jedi. Sing is able to establish herself as a distinguishable and respectable Jedi. This little twist of fate allows for other differences. The evil that grows with the mysterious Sith is thwarted by Sing and her friend Anakin Skywalker. They discover Palpatine's plans for Galaxy conquest and stop him before he implements Order 66. The Jedi survive and Peace (with the occasional despot) reigns over the galaxy."

She looks pretty daggone tough to me!

Clone Crazy is back with a new chapter!
-- Posted by Tamer on Monday, July 11 2016
Enjoy Will of the Force: KOTOR #10 Friends and Foes!

The Closet Jedi is asking for your help...
-- Posted by Tamer on Monday, July 11 2016
"So http://www.imperialshipyards.net/SMF/index.php?topic=10111.msg194906#msg194906I am Hoping to fund the building of 2 huge dioramas which i will post pictures of in My diorama thread and Facebook

All my pieces are 3d printed at shapeways.com. You just cant get the level of resolution and detail on a consumer level printer yet. Also some of these models take along time to print. Its just not practical for me to print these myself. ..... And yes the prices listed are for real.

I would also like to be able to make a big order and use the proceeds directly to fund the Dioramas i am building for my self.

I am also thinking of selling some items i print myself to go towards buying a dedicated printer just for sales. This would also have to be a big initial order so i can buy a second printer.

SO feel free to take a look and please email me at Theclosetjedi@gmail.com if you have any questions."

Lets just say the stuff we have seen so far sure does look great to me!

A new dio on our Facebook Page...
-- Posted by Tamer on Monday, July 11 2016
Stefan is back with a new dio, Rebels this time out!

Its time to vote for your favorite in Hasbro's Fans Choice Poll!
-- Posted by Tamer on Sunday, July 10 2016
All the nominations are in and now it is time for you to cast your vote for your favorite. We can only send the top 6 to Hasbro so it is up to you to make sure you share the news and convince as many people to vote as you can!

Remember, this will close around 9 AM Eastern tomorrow.

Ron Hembling already back with a new WIP...
-- Posted by Tamer on Sunday, July 10 2016
"Hi All,

Well no ress for the wicket LOL,

This next custom is a FNAF (Five Nights at Freddy's) for those that don't of it, it is a jump fright game set inside a Freddy FazBear's pizzeria where you are a security guard and have to stop the animatronics from killing you.

This custom is based on Freddy, I got the idea from a picture I saw on the net and loved the idea of the animatronics looking beat up and looking scary.

The figure is from Funko and I removed the lower jaw and removed the original teeth and added plastic card on the inside of the jaw and made new teeth from plastic card. Small greeblieswere added just inside of the right jaw to simulate the movement rod is broken that is why his jaw has fallen away.

The right eye was done by drilling out the old eye and adding a new one using a small ball joint and drilling a hole in the back and attaching wires, the left year was removed and wires were glued in place.

The left hand was removed and I made a animatronic one using plastic card and plastic rod. The right arm was removed and I drilled a hole and glued wires inside.

The stomach was drilled out and I inserted greeblies so they look like a motor and frame work and the right foot was removed and I made a new animatronic one by using plastic card.

Next up painting.

Ron"

Ron definitely doesn't let the grass grow under his feet!

Ron Hembling finishes his Death Star Light...
-- Posted by Tamer on Sunday, July 10 2016
"Hi All,

The DS Light Display is now complete and I will get some outdoor pics tomorrow.

I completed the DS by repaint the panels a darker grey and then I did dry brushes of lighter greys and silver. Once the dry brush was dry I then gave the whole thing two light washes of matt back.

Ron"

Wow did that turn out great. Wait till you see how it lights up!

Gold Leader One weathers up the new Falcon...
-- Posted by Tamer on Sunday, July 10 2016
"Tonight I weathered up TFA Millennium Falcon. I thought it was just too bland looking. The circles in the front, and the square pieces near the cockpit and rear of the ship I dry brushed with black until the area was filled. Then I dry brushed again with some gray so it wasn't too dark. Really happy with the end result."

I would be too as the results are pretty drastic. In a good way!

BDC41866 is back with more to come!
-- Posted by Tamer on Sunday, July 10 2016
"Ive been meaning to do this guy for awhile but I needed a few armor bits from an Iron Grenadier. Finally able to put the parts I wanted to try together and I succeeded in making a Sith Temple Guardian. More to come..."

Looks pretty tough to me.

A new day and a new dio from Stefan!
-- Posted by Tamer on Sunday, July 10 2016
He has posted another great dio on our Facebook Page. The time a TIE Hangar!

Panther gives us a new Rancor Dio Update...
-- Posted by Tamer on Sunday, July 10 2016
"I have cast a handful of humerus and spread them out over the floor of the Rancor pit, putting the skeletal body at the bottom of the trap door slide. Unfortunately the mold for the humerus has broken, so I have had to order some more Blu Stuff to continue. For now, I think this will do!"

Oh yeah, that souped it up a bit!

Today is the last day for Fans Choice Poll Nominations!
-- Posted by Tamer on Saturday, July 9 2016
We have over 50 characters already up to choose from why not more! Remember we close that process today and then its time to vote between now and 9am Monday! Tell your friends, share it on your social channels, lets get as many voices heard as possible so I can send in the top 6 choices to Hasbro on Monday!

Hasbro sends the high-rez images of the latest Fall Toys!
-- Posted by Tamer on Saturday, July 9 2016
We saw these yesterday and the fine folks at Hasbro sent me the high-rez images just a few minutes ago. Enjoy and share em all over!

Berszu makes it hard to believe its just paper.
-- Posted by Tamer on Saturday, July 9 2016
He is back with another cardboard AT-AT!

It is hard to believe this is just made out of paper. The images are absolutely stunning!

Gold Leader One is back with a Blaster re-paint...
-- Posted by Tamer on Saturday, July 9 2016
"I found this in my basement tonight. It's a DL-44 blaster that's a squirt gun, which I had when I was a kid. I just did a quick repaint and made it a bit more real looking. I repainted the orange on the scope black, and painted the tip of the gun silver. I also painted the knob looking parts silver as well. Finally I dry brushed the gun with some black to give it a used look. I also super-glued the black piece on the handle. That's where you would fill it up with water, after all these years it was coming loose very easily.

I just wanted to give it a bit of a replica feel and I'm quite happy with how it turned out."

I would be too, it turned out great!

JDeck continues work on his Rebel Alliance AT-RT...
-- Posted by Tamer on Saturday, July 9 2016
"I'm almost finished with the vehicle part. I weathered it, added some bags, equipment, weapons and so on. I spliced the main gun with the heavy repeater from the Bandai stormtrooper kit. Its bigger and more detailed than the original. I just need to touch it up a bit. Then finish the figure, and make some kind of jungle scene.

I get a lot of inspiration for these vehicles from WW2 movies. I watched Castle Keep the other day. I liked the beginning when they were drudging through the mud in that old jeep. i might make it something like that."

This one looks like it is gonna turn out as cool as his Rebel AT-TE!

Its BDC41866 back with more...
-- Posted by Tamer on Saturday, July 9 2016
"Pretty simple kitbash and some added soft goods. Old Republic Jedi Padawan..."

I like the blend of soft goods here.

Want to win a free Gold Stormtrooper?
-- Posted by Tamer on Saturday, July 9 2016
"ONE (1) lucky person that enter our new Star Wars™ contest will walk away with the Hot Toys‘ Stormtrooper™ Gold Chrome Version Sixth Scale Figure that we’ll be unboxing during out livestream on July 6th! Enter now trooper fans!"

Someone has to win why not you!

Lisa Rose wants me to share this video!
-- Posted by Tamer on Saturday, July 9 2016
"You guys need to see the most epic Star Wars girl power video ever! ...totally not exaggerating :)"

Well now I totally get it! Its great and who doesn't want more Rey!

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Saturday, July 9 2016
Its a new morning and a new dio shared by Stefan on our Facebook Page!

Hasbro unveils new Appli APP!
-- Posted by Tamer on Saturday, July 9 2016
As a part of the images I just shared I could see the boxes all had this graphic on em. Looks like you are gonna be able to film your toy play and then even add movie special effects. We will definitely be asking more about this in our Hasbro Q and A!

Nerdist.com shares new Hasbro SW Fall Toys Preview...
-- Posted by Tamer on Saturday, July 9 2016
I found this on Facebook yesterday so I am a day late and a dollar short (yet again! LOL!), but in case you weren't aware here is a preview of the toy images they have shared so far.

Look for us to share more images and news as Hasbro makes it available and thanks Nerdist.com for the early preview!

See the Star Wars RC Experience and More at Celebration Europe...
-- Posted by Tamer on Saturday, July 9 2016
"North Entrance: N8
Sessions happening Friday-Saturday: 10:00-19:00; Sunday: 10:00-17:00

Come and see one of the most dramatic experiences ever staged at Celebration. For the first time ever the Propel Star Wars craft will be revealed, flown by a team of professional pilots in front of iconic Star Wars environments. These stunning products are not available until later in the year but you will be one of the first to see them in action. After you’ve seen the Experience you can register your interest to receive updates in the lead up to launch later in the year. Make time to visit the Propel Experience (Entrance N8), seeing is believing."

I would so be there if I was able to make it!

Big Bad Toy Store lists great new pre-order and in stock Items we like!
-- Posted by Tamer on Friday, July 8 2016
MARVEL COMIC TWO-PACK SET
Kids and adults alike can collect their favorite Marvel comic characters in this 3.75-inch 2-pack set, each packed with a Special Edition Marvel comic book! Figures feature detailed articulation, sculpting, and deco. This set features the Guardians of the Galaxy with Gamora paired with Star Lord and Rocket Raccoon with Groot. Cases of 8 of these figures are also available!
http://www.bigbadtoystore.com/bbts/search.aspx?search=marvel%20legends%20comic%20two%20pack%20wave%2003

BANDAI JAPAN PREORDERS
Gohan and Launch from the Dragon Ball Styling collection, S.H. Figuarts Pocket Monster XY&Z Lizardon, and other new figures along with model kits are up for preorder from Bandai Japan! Impulse Gundam Blanche Exclusive, the HGUC RGM-89S Proto Stark Jegan Exclusive, and Robot Spirits MS-06D Zaku Desert Type A.N.I.M.E. Exclusive are some of the new model kits available, while figures like S.H. Figuarts Obi-Wan Kenobi from Attack of the Clones makes his debut thanks to Bandai Japan.
http://www.bigbadtoystore.com/bbts/list.aspx?list=21272

CASE OF 6 STAR WARS EPISODE VII BLACK FIGURE WAVE 04
The most anticipated film of the year, Star Wars: The Force Awakens, comes to life with Star Wars: The Black Series for the ultimate collection! This case includes Rey, BB-8, Kylo Ren, First Order Tie Fighter Pilot, First Order Snowtrooper, First Order General Hux, and X-Wing Pilot Asty. Each new 6-inch scale figure is highly articulated and exceptionally detailed, making them perfect additions to any Star Wars collection. $119.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20wars%20black%20figure%20wave

NEW NECA ARRIVALS
Celebrate 25 years of Home Alone with these 6 to 8” retro-clothed action figures from the classic family comedy without the family! Get Kevin, Harry, and Marv, who all come with accessories right from the movie. In addition, Neca’s line of Alien figures now include their series 8 set of 4 7” to 9” figures of 1992’s Alien 3 with Weyland Yutani Commando, Dog Alien, and a Ripley figure that features the likeness of Sigourney Weaver. Batman also gets a new 1/4 scale figure based on the Dark Knight’s appearance in Arkham Knight, the final chapter in the acclaimed video game series. He has 25 points of articulation and includes crime-fighting accessories. Finally, to celebrate 30 years of the 1982 Texas Chainsaw Massacre 2 movie, Neca has made a new retro figure of Leatherface, who comes with a chainsaw, carving knife, and wears cloth-material clothing. With these Texas Chainsaw Massacre 2, Batman, Home Alone, and Alien figures, you’re sure to liven up your cool collection of classic iconic figures from Neca.
http://www.bigbadtoystore.com/bbts/list.aspx?list=19214

NEW FUNKO POP! ARRIVALS
Make room in your Funko Pop! collection for these newest arrivals! Marvel’s Falcon, Rick & Morty, Star Wars’ FN-2199, and Sailor Moon’s Sailor Mercury are all part of Funko Pop!’s new releases. These simple yet stylized 3.75” figures are very collectible and feature window-box packaging to keep them clean and safe. $9.99 Each
http://www.bigbadtoystore.com/bbts/list.aspx?list=18570

KYLO REN VOICE CHANGER HELMET
Disguise your voice like the dark warrior villain from Star Wars: The Force Awakens and battle against the Resistance, brought to you by Hasbro! Press the voice changer button and give commands to your First Order troops. The button activates voice-changing technology for several seconds, allowing hands-free play! This item requires three AA batteries, which are included. $74.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=HAS24723&mode=retail

The Star Wars Fans Choice Poll is now live!
-- Posted by Tamer on Friday, July 8 2016
"Even more exciting news, we’re thrilled to announce we’ll be launching the Star Wars Fan’s Choice Poll again this year and would love for you to be a part of it. Last year, fans from all over were able to cast their vote on the Star Wars character they wanted to be transformed into a Hasbro Black Series 6-inch figure – and it was a huge success, creating TWO new additions to the line (Sabine Wren and Darth Revan). We need the fans’ help again this year, and we’re hoping you’ll join us in hosting the poll! (Of course I said yes!)

· All characters are fair game except from Rogue One: A Star Wars Story

· Any characters from the Star Wars Rebels or Star Wars: The Clone Wars animated series would be sculpted in the realistic style of the Star Wars: The Black Series line

· To nominate, you can post in the forums, one of our facebook posts, or send me and email: tamer@imperialshipyards.net (subject "HASBRO FANS CHOICE VOTETo vote, fans can only submit 1 vote per email address or social handle

· To vote, fans can only submit 1 vote Forums Handle here:

http://www.imperialshipyards.net/SMF/index.php?topic=10106.0

· The top six poll results need to be submitted to me by Monday, 7/11 at 9am ET (so I can email em to Hasbro!)

· Similar to last year, the final vote will be held on StarWars.com, and the winning figure will be revealed at the San Diego Comic Con Hasbro Star Wars panel"

The full particulars and how to nominate and vote for your favorite character can be found here!

It is great to be part of this for another year! Get to nominating and voting Yarders!

UPDATE: Don't forget you will need to register for the forums to nominate and vote. Its free to join and post!

Time to pose your burning questions to Hasbro!
-- Posted by Tamer on Friday, July 8 2016
It is that time of year again and Hasbro has graciously agreed to give us some of their time for a new question and answer session at San Diego Comic-Con!

Pose your questions here and be sure to ready the full question and answer session description while preparing your questions. I will get them sorted and off to our site reporter Todd for inclusion in this year's SDCC Q and A!

What are you making for the Heavy Gunner Challenge?
-- Posted by Tamer on Friday, July 8 2016
In all the SDCC Previews and Hasbro Fans Choice, etc. it seems we are all info overloaded, but I wanted to make sure folks were still aware we are also in the middle of a Customs Challenge!

The top vote getter this time was the AT-AT Driver Heavy Gunner (as voted on by our members, not just me I swear!) and we have seen some awesome entries already, but its time to get this hopping again! Click here for the full details.

Remember this is over the 23rd!

Jedi Minstrel shows us a new Jedi ...
-- Posted by Tamer on Friday, July 8 2016
"A little salute to the Olympics.

Along with Chi'lee, of the Jedi Commandos that did not survive was a Chagrian by the name of Hon'gree M'te. The council was hesitant to send M'te on this mission due to his "less than calm" approach to mediation. He once brought peace to a planet by having two warring factions select 4 warriors each. They were to compete in several games to decide a victor. The side with the most wins, won the war. After days of competition, one of the factions was declared the winner, but the warriors of the winning side would not accept their prize. They told their leaders they would forfeit their wins unless they agreed to peaceful and respectful integration of both factions. Weeks of debate on both sides finally came to an end. To celebrate the unification, an annual festival of games were held. Over the next several years, other tribes and factions joined the unified peoples. On the 10th anniversary of the Games, M'te was asked to be the Overlord (the official head judge). He accepted. Soon afterwards, he joined Chi'lee and 22 others to aid in the defense of the Trelay Sector. M'te was killed in their final battle with a Sith Lord."

He always creates the most excellent back stories!

I-am-Boba-Fett is back with an update...
-- Posted by Tamer on Friday, July 8 2016
"Here is a custom GHHK HOLOCHESS MONSTER figure. This is a multi-articulated fully poseable 3.75" scale figure. Custom paint work by me also. The Ghhhk were a species whose appearance was used for one of the holographic chess pieces in the game Dejarik seen in Star Wars A New Hope."

So cool to see these obscure characters in action figure form. I love it!

The Closet Jedi shares a new project...
-- Posted by Tamer on Friday, July 8 2016
"I was very excited to to complete the project. The project turned out amazing. The consoles them selves were not difficult to model since i had something pretty close to it already done. I just had to change the profile and add all the details. The middle wall was the most difficult to do since it was a completely new model and i had to start from scratch at least 6 times before i got it right.

I probably could have made an exact replica but when you shrinking down a 7 or 8 foot wall to 5 1/2 inches you have to make certain design choices so it doesn't look too busy or crowded in the space you have to work with.

Here are shots of the middle wall in varying stages."

It looks great to me!

Stefan shares a new dio on our Facebook Page...
-- Posted by Tamer on Friday, July 8 2016
He must have one massive area to display these. I don't know what number of dio we are on, but we have showcased quite a few. They are fantastic!

Toys R Us and Entertainment Earth getting 6" Astro-Mech SDCC Exclusive...
-- Posted by Tamer on Friday, July 8 2016
"Star Wars The Black Series Astromech Droid 3-Pk.

Build your Star Wars collection with the Astro-mech Droid 3-Pack from The Black Series! This collectible showcase of the heroic droids from the Battle of Yavin features exquisite craftsmanship, multiple points of articulation and premium detail that only The Black Series from Hasbro and Star Wars can offer!"

We will let you know when this goes live or you can order on-line!

Sideshow teases Legendary Scale Stormtrooper!
-- Posted by Tamer on Friday, July 8 2016
"Stormtrooper Legendary Scale Figure

Sideshow is excited to announce the Stormtrooper Legendary Scale Figure! Star Wars™ fans will have an opportunity to acquire this massive figure and add it to their collection. Coming soon from the galaxy far, far away… Move along!"

It is turning into Sideshow Day here at ISY! Look for us to feature the pre-order when this goes live.

Sideshow offers Exclusive Bossk for SDCC!
-- Posted by Tamer on Friday, July 8 2016
""You got a problem with Boba, you got a problem with me."

Boba Fett’s mentor and one of the most feared bounty hunters in the galaxy, Bossk, joins Sideshow’s Sixth Scale Figure collection.

The Trandoshan bounty hunter comes with an impeccable replica of his primary weapon of choice, a Relby v-10 micro grenade launcher. Fully articulated, the Bossk Sixth Scale Figure features two sets of hands and a new movie-accurate head sculpt.

Place the Bossk figure on his hex base for an impressive display of his detailed pressure suit, flak vest and support rig.

Add the Bossk Sixth Scale Figure to your Star Wars bounty hunter collection today!"

I almost forgot, this one will get you double reward points, but only for a limited time so get your order in!

Get the Hot Toys 1/6 Scale Jumptrooper!
-- Posted by Tamer on Friday, July 8 2016
""Following the relase of the Shock Trooper Sixth Scale Collectible Figure from the popular videogame Star Wars™ Battlefront, Sideshow and Hot Toys are delighted to announce the Video Game Masterpiece series is expanding with the brand new Jumptrooper™.

Known to use the jump pack to gain high ground, the highly-accurate Jumptrooper Sixth Scale Collectible Figure features a finely crafted Jumptrooper armor and helmet with weathering effects, a magnetically-attached jetpack with life-like thruster fire accessores, detailed heavy blasters and scout blaster, and a specially designed sand-themed dynamic figure stand ideal of aerial poses.

Star Wars fans shouldn't pass up this opportunity to add this 2016 Toy Fair Exclusive item to their trooper display!"

It looks great to me.

Ron Hembling shares new work on his DS Light...
-- Posted by Tamer on Thursday, July 7 2016
"Hi All,

Last update for the night.

I started painting the DS it was painted Tamiya Medium Grey Spray and then I started on the light grey sections first, I have given this area two light coats of Vallejo Sky Grey. I put aside the DS to let the paint dry until tomorrow and then redo this area again which will have one more heavier coat.

The Star Destroyers have been painted using Tamiya Medium Grey Spray when I did the DS. I then painted them using Vallejo Medium Grey and then a drybrush of Vallejo Sky Grey, I then gave them a wash of watered down matt black.

Once the wash was done I drybrushed them Sky Grey and then Light Grey, I then lightly went around the raised areas with a very heavy watered down matt black and the gave it one last drybrush using a mix of 70/40 - Light Grey/White.

Ron"

This is gonna be so great when he gets it done!

The Irish Rogue is back with COGS of the Empire...
-- Posted by Tamer on Thursday, July 7 2016
"From the characters of the Changing Tides and Knightfall trilogy comes: COGS of the Empire

Star Wars

Clone Wars/ Rebels

Cogs of the Empire: Currents Ablaze

Darkness has risen! Memories of democracy and THE CLONE WARS fade beneath the secure vice of Imperial governance.

The Grand Army of the Republic has undergone a stark change in doctrine. STORMTROOPERS clad in shining white armor maintain an ever growing presence across every system; far and near!

Clone battalions fight on for promised peace! Continuous consolidation keeps their ranks from dwindling. The 501st again, are engaged with an old enemy from a war already lost…"

Trust me folks that is just the warm up!

Jon K is back with a KOTOR Update...
-- Posted by Tamer on Thursday, July 7 2016
"Back to the KOTOR figure work, here's Jolee Bindo. Mostly a reworked Mace Windu figure with the skirt trimmed, and the torso fabric creases filled in with greenstuff, repainted with arms from a TVC Naboo Royal Guard and a Stass Allie saber. Not the most complex I've done, but he fits in well with the rest of my KOTOR customs!

And here's Canderous Ordo. He's got the Royal Naboo Guard legs and torso (ribs filled in with greenstuff), a TVC AT-AT driver head with the sideburns shaved off, Talon Karrde's arms, Han Solo's vest and an Evo Trooper's gun.

Thanks to everyone for all the comments on my previous figures, the feedback is really appreciated! I'm finally starting to get closer to rounding out the KOTOR set."

I always like it when they share the recipe. Good looking update Jon K!

The Closet Jedi is back with a new dio...
-- Posted by Tamer on Thursday, July 7 2016
"Here are some pics of my latest project enjoy!"

It looks great to me! He has a link to his new Facebook Page too.

JDeck starts a new model project...
-- Posted by Tamer on Thursday, July 7 2016
"I got a Revell AT-RT that I'll be giving the rebel alliance treatment to. This is a really cool kit, I've read many reviews and this kit is very much underrated. First off its 1/18 scale, which is awesome, it looks better aesthetically and more accurate, than any of the Hasbro versions. The articulation is nice, it even has little hydrologic pistons that move. This kit doesn't come with a stand like the other Revell kits, I'll have to make my own. It is a Revell kit so assembly is not real smooth, but its not rocket surgery.

For now I have Endor Leia as my rider. I need to give her swivel wrists to look right. I'll fix all that when I make a completely custom rider. For my application I'll change the gun a little, repaint, and add some rebel equipment. For the paint scheme, I was thinking of a Slave1 look. Light grey with worn down light green making a sort of camouflage."

Sounds like a great project to me!

Want to see a new droid created?
-- Posted by Tamer on Thursday, July 7 2016
Thank the Maker (William) is asking this question via our Facebook Page:

"I have a Question to ask To all Star Wars Action Figure Collectors, What Droid that has not been Produced would you like to see me make?"

Kualan is back with a new chapter for Tales From The Clone Wars!
-- Posted by Tamer on Wednesday, July 6 2016
"Hello folks!

Apologies for yet another long delay in getting a new issue of the comic out, but Issue Three of Volume Five is finally here! This issue underwent several rewrites but I hope you guys enjoy the final result, 'Crisis And Opportunities'."

Folks, I know I just teased this chapter, but heh you can't stop the press and this is too cool to keep for tomorrow. Kualan just does a fantastic job with this series just for the love of the hobby. Be sure to let him know what you think!

Kualan teases a new chapter soon!
-- Posted by Tamer on Wednesday, July 6 2016
"Hi folks. Here's a preview for Issue Three, coming soon - hopefully by the end of the week."

I like the sound of that. Tales From The Clone Wars is one fantastic story. I am so glad to see it continuing.

JDeck is back with a custom figure!
-- Posted by Tamer on Wednesday, July 6 2016
"Hello folks been a while since I've done some figures, or anything for that matter. Been busy with work. I've had supply problems of every kind. I've had labor difficulties. You know. But I'm building some figures that are mostly a mashup of 5poa and SA sculpts, it cuts cost, and makes a unique figure. The POTJ, and the more recent saga legends figure head sculpts are actually pretty good. I'm doing a series called "Major Panno's Raiders", an all non human group of Rebel Alliance commandos, and saboteurs, who's key mission is to reap havoc on the Empire.

First is captain Salcom. The Quarren leader of the main squad. He a strict no nonsense leader who expects the very best from his men. Capt. Salcom knows as well as the rest of the group, " alien" species must work hard to accel in the human dominated alliance.

This one is a 15-15, $15, done in 15 minuets. it still retains the 14poa of the SA figure. Simple, but I like it. I may darken the skin later, meybe."

It is great to see JDeck back and I really like his Quarren!

Mr. Jedi 1977 gives us his fourth batch of vintage carded customs...
-- Posted by Tamer on Wednesday, July 6 2016
"Ok wrapping up the carded update with the fourth and final carded update for now! With the exception of the Saitorr kal fass card These cards were done by Foxtrot Delta so i would like to give him a big thank you for helping me out with some really cool cards I was hoping to have the Han Solo Carboinite card set up but i am still working on that so it will be up next post .. Thanks again in advance for all who read and comment..... returning soon with more custom figures!"

Pretty cool to see these. I am beginning to wonder if soon Artie will be able to say he has every character that was on screen in the Original Trilogy in carded custom action figure form. So awesome!

Blizzard Force shares his Vintage German Kenner Cards...
-- Posted by Tamer on Wednesday, July 6 2016
"Didn't have time to post an update before because I was away for a congress...I have now finished the designs for all of the "first 12" and was able to produce 8 of those in the meantime. I deliberately went with the same images as the original Kenner cardbacks for these, even though I'd personally probably prefer a few different pics (Vader, Obi-Wan, mirrored Luke, to name some) I thought it important to make these as vintage-looking as I could achieve (they're still clearly identifiable as customs, after all). I therefore did a few variant versions (haven't uploaded those yet) as well, for example Vader with a red saber instead of a pink one and a different Obi-Wan. So, without further ado, here they are."

So awesome to see these cardbacks in German!

Ron Hembling starts a Death Star Light Project...
-- Posted by Tamer on Wednesday, July 6 2016
"Hi All,

I was at the shops the other day and spotted a DS wall light and knew that it would be a great fun little project. I removed the back and puttied the light holes as they were to big and once dry I sanded the exterior before I started on the second layer of putty.

I drilled new smaller light holes and once done I noticed that the surface was very plain so instead of putting up the old holes that need it I decided to add plastic styrene pieces to the surface to give it some texture.

I still need to add a lot more plastic styrene pieces and then re-spray the DS and then weather it and then start on the Star Destroyers.

Ron"

This is gonna be another great project!

Episode 11 is up!
-- Posted by Tamer on Wednesday, July 6 2016
Darth Daddy and Peakob1 are back with a new episode. Looks like "Mystery of a Thousand Moons" is the topic this time.

Stefan shares something for the Mando Fans...
-- Posted by Tamer on Wednesday, July 6 2016
I got up this morning to see he had posted two new dioramas on our Facebook Page.

So cool to see new characters!
-- Posted by Tamer on Wednesday, July 6 2016
William Palitti has shares his first attempt at the droid you see above. If that is his first attempt one can only wonder about all the myriad other possibilities!

Stefan shares more great dios on our FB Page!
-- Posted by Tamer on Wednesday, July 6 2016
You gotta love some love for Grand Admiral Thrawn!

GG continues SDCC with a McQuarrie Chewbacca Mini-Bust!
-- Posted by Tamer on Wednesday, July 6 2016

Kylo Ren Hasbro SDCC Exclusive available outside of Celebration London!
-- Posted by Tamer on Tuesday, July 5 2016
"The STAR WARS: THE BLACK SERIES 6-Inch Kylo Ren Pack will be for sale at Star Wars Celebration 2016 in the Forbidden Planet booth #S1003. It will also be available at Booth #3329 at Comic-Con International in San Diego. Following the convention, a limited number will be available on HasbroToyShop.com. Canadian fans can also purchase the figure set during Fan Expo Canada in September."

Sideshow previews their 1/6 Scale Zuckuss!
-- Posted by Tamer on Tuesday, July 5 2016
"Zuckuss Sixth Scale Figure

We’re expanding our bounty hunter sixth scale line-up that began with Boba Fett™, 4-LOM™ and IG-88™! The Zuckuss™ Sixth Scale Figure will be available soon for Star Wars™ fans to pick-up for their collections!"

A lot of folks are gonna be happy about that!

Happy 4th of July Shipyarders!
-- Posted by Tamer on Monday, July 4 2016
We here at ISY would like to wish you and yours a Happy 4th of July and hope you have a great Independence Day celebrating with friends and family. Be safe out there today Shipyarders.

We would also like to thank active service members, veterans, and all of the family members of those respective folks who allow us the freedom to celebrate today. Lets all take some time to remember them today!

Darth Daddys showcases Han for the 4th!
-- Posted by Tamer on Monday, July 4 2016
"Super-Articulated "Episode VII - Han Solo"

On this day of celebrating independence, Customs for the Kid felt Han Solo best embodied the rebel spirit that we all wish we could emulate. Assisting in taking out two Death Stars and the Starkiller Base in Force Awakens, I can think of no other so accomplished. Paying tribute to the character meant constructing and executing a plan."

I like how he turned out. It is so cool to see super arty on this figure.

Jodo shows us his Tavern Diorama!
-- Posted by Tamer on Monday, July 4 2016
"Here's The Second Sun Tavern, a location I developed for my photonovel. It's an extremely simple concept which just needed to be interesting enough to keep reader's attention for a bit. I think some of these angles and shots are actually better than what made it into the chapter too."

Talk about a great set for his new chapter. Awesome stuff Jodo!

Jodo gives us a new chapter!
-- Posted by Tamer on Monday, July 4 2016
It is packed with a lot of action. I love a great Cantina Scene!

Click here to get into the action.

Stan finishes his latest custom...
-- Posted by Tamer on Monday, July 4 2016
"After nearly 2 month the bar fly Tzizvvt is ready to fly with all the cantina mates."

He looks perfect to me.

Stronox is back with a 1/18 Scale Boba Fett!
-- Posted by Tamer on Monday, July 4 2016
"Concept Boba Fett...For some reason I get a ton of requests to do this version as I have done him in the past. Some subtle changes this time around and even more painting details! Thanks for taking a look at my work guys!"

As usual, Stronox blows the doors off a custom figure. Here is your link to go add this one to your collection.

The first Rogue One Imperial Tank Custom...
-- Posted by Tamer on Monday, July 4 2016
I found this on FB yesterday. Pretty cool!

Dayton is gonna finish his Sith Temple...
-- Posted by Tamer on Sunday, July 3 2016
I seem to be on a dio kick this morning. Going through FB this morning I saw that SF 30 was gonna finish has already fantastic Sith Temple from many years ago.

I remember how cool I thought this was then and I cannot wait to see how he finishes this off. Get ready for a slew of fun updates as I see em!

Ron Hembling showcases his dioramas!
-- Posted by Tamer on Sunday, July 3 2016
And there are T-Shirts! I gotta get me one of those. It looks like a great time was had by all.

Another great dio on our Facebook Page...
-- Posted by Tamer on Sunday, July 3 2016
Same customizer that shared yesterday. You know he had me at AT-AT!

Foxtrot Delta is back with a Vintage Carded Probe Droid...
-- Posted by Tamer on Saturday, July 2 2016
"Here's a Vintage Imperial Probot from the Empire Strikes Back Hoth Playset done on a vintage era cardback with a custom blister bubble packaging, don't know if this has been done before but I like the Probot as an action figure versus part of the playset and wondered how it would look carded, so here it is."

Folks, I think this is utterly outstanding! Talk about tugging at my vintage nostalgia heartstrings! I love it!

Stay up to date with Sideshow's On Line SDCC!
-- Posted by Tamer on Saturday, July 2 2016
"Every year hundreds of thousands of people descended upon San Diego in a celebration of pop-culture of all kinds. It’s a spectacle to behold and Sideshow is there every year.

However, why limit the fun to just five days and one city? Why not invite the world to celebrate for an entire month?

We bring you: Sideshow’s Online Comic-Con!

No lines, no badges, no convention hall food of questionable origin and flavor profile! Just an entire month of new releases, content, and surprises. Everyday at 9am PST you can expect us to announce the newest collectibles that we’re working on. Some have been teased, and many have never before been seen. You’ll see the latest offerings from Marvel, DC, Star Wars, our own Court of the Dead, and so much more.

Want to be a part of it all? Join us on Facebook, Twitter, and Instagram. Also be sure to keep checking your inboxes as we unveil what our artists have been up to.

It all starts on July 1 and wraps up with us bringing you all the news and information we can direct from the show floor of SDCC! See you there!"

I like it and no lines!

Darth Daddy is back with an update...
-- Posted by Tamer on Saturday, July 2 2016
"

STAR WARS REBELS "CAPTAIN REX - STORMTROOPER DISGUISE"

After observing Captain Rex dressed in Stormtrooper disguise in the episode "Stealth Strike" in Season 2 of Star Wars Rebels, we knew we wanted to make the Stromtrooper version of Rex in action figure form. To accommodate Rex's bulky frame we used the body of the old POTF Stormtrooper with the head of the Star Wars Rebels Captain Rex action figure to create the silhouette we desired. To finish the figure off, we just hollowed out the head of a Star Wars Rebels Stormtrooper with a Dremel to make a removable helmet and placed the same figure's blaster into Rex's hand. The figure only has 5 points of articulation at the time of this post, but if we later come across an abundance of double-sided ball joints down the road, we may decide to articulate him some more."

He looks good to me!

Sideshow annouces Droid Giveaway...
-- Posted by Tamer on Saturday, July 2 2016
Someone has to win why not you!

Click here to go enter!

Star-Fall Webcomic Update...
-- Posted by Tamer on Saturday, July 2 2016
"-Update-

- This weekend, July 2nd and 3rd Star-Fall will be at Hero Con in Austin, Texas. Come meet artist and co-creator JS Loomis and pick up some exclusive Star-Fall merchandise! Tickets and info: Hero Con

- Exclusive signed copies of our printed preview comic book and hand-drawn custom chibi-style portraits are now available for purchase in the Star-Fall shop!

- Check out this new mini animation of the Star-Fall logo that we will be using in all of our upcoming videos! Beautifully rendered by guest artist David Wendl.

We can't wait to see you all in Austin!

Berszu is back with a new Walker...
-- Posted by Tamer on Saturday, July 2 2016
"Another version of the AT -AT. 100 years after the Battle of Endor . 30 "model built from the ground with cardboard."

Wow, wow, wow! And all from paper!

Steezy Collector is back with a WIP...
-- Posted by Tamer on Saturday, July 2 2016
"WIP Darth Wyyrlok for my One Sith collection"

It sure looks good to me so far.

Rezakia is back with new fan fiction!
-- Posted by Tamer on Saturday, July 2 2016
"The collision with the Star Destroyer sent the Mon Calamari cruiser spinning in a flat slow turn. The brave Calamari crew was struggling to hold their ship together as their cruiser started its' descent deep into the planet's atmosphere. The cruiser's gigantic wound billowed black smoke from the top of it's hull showing a spiral of smoke as it fell. From the bridge alarms blared as the Calamari crew struggled to keep their vessel airborne. “Helm! Status!?” Captain Barrax barked through his aged and gravely Mon Calamari voice. A young female Calamari controller officer shouted up from her station “Attitude control is gone! The Planets gravity has us!” Captain Barrax turned in his white captain's chair his gray skin with white spots creased and wrinkled. Barrax shouted towards another officer “Engines?!” A beige uniformed Calamari officer looked up from his station and shouted his reply over the alarm klaxons “Main's are offline. Aft thrusters are operable!” Barrax turned back towards the main view-port watching the horizon of the plant slowly turn in front him. “Bow thrusters?” he asked. “Destroyed!” the same Calamari technician replied. Barrax Turned back to the female Calamari officer “Distance to impact?!”. The female calamari replied with a shuttering in her voice as she replied “Sixty thousand kilometers and closing fast!” Another male calamari officer in the station adjacent to her shouted towards Captain Barrax as well “ We're dropping like a rock!”. Barrax took a second to think before starting his reply in his gravely aged voice. “Helm get the inertia dampers ready!”

And that is just the first paragraph. As you can see you are in store for some great reading.

Gold Leader One creates a Han Evolution Pack...
-- Posted by Tamer on Saturday, July 2 2016
"Just a little something I put together quickly. Nothing special. Showing Han's character development but using the 6" Black Series figures."

It gave me an idea that Hasbro needs to create 6" Evolution Packs (remember those?) and let Han be one of the first characters selected.

More great dios on our Facebook Page..
-- Posted by Tamer on Saturday, July 2 2016
I love getting up each morning to see what new artwork and creativity has been shared there and today was no exception!

More Panels and Guests Announced for Star Wars Celebration Europe...
-- Posted by Tamer on Saturday, July 2 2016
There a hundreds of panels to choose from and you can log in and schedule your events. What a great way to get organized for the Celebration!

The SDCC Exclusive Hasbro ANH Obi-Wan!
-- Posted by Tamer on Friday, July 1 2016
"STAR WARS: THE BLACK SERIES 6-Inch Obi-Wan Kenobi Pack
(Ages 4 years & up/Approx. Retail Price: $44.99/Available at Booth #3329 at Comic-Con International in San Diego)
Recreate the noble journey of the great Jedi Master with the highly collectible Obi-Wan Kenobi Pack. Featuring authentic, movie-accurate detail, this elite 6-inch scale Obi-Wan Kenobi figure comes equipped with Jedi robe, 2 lightsabers, an electronic light-up table, and Princess Leia hologram delivering a vital message. Includes 1 figure with multiple points of articulation and 5 accessories. The STAR WARS: THE BLACK SERIES 6-Inch Obi-Wan Kenobi Pack will be for sale at San Diego Comic-Con 2016. Following the convention, a limited number will be available on HasbroToyShop.com. Canadian fans can also purchase the figure set during Fan Expo Canada in September."

Hasbro sends their High-Rez Images of this year's Con Exclusives!
-- Posted by Tamer on Friday, July 1 2016
"Hello Star Wars fans!

Wanted to share details on the two Hasbro Star Wars convention exclusives that were revealed this morning. The Black Series 6-Inch Kylo Ren Pack will be available at Star Wars Celebration, and The Black Series 6-Inch Obi-Wan Kenobi Pack will be available at San Diego Comic-Con.

STAR WARS: THE BLACK SERIES 6-Inch Kylo Ren Pack
(Ages 4 years & up/Approx. Retail Price: $34.99/Available in the Forbidden Planet Booth #S1003 at Star Wars Celebration 2016)

Reveal the power of the dark side with this collectible 6-inch scale figure of Kylo Ren without his mask! Fans can relive the First Order commander’s most pivotal moments from STAR WARS: THE FORCE AWAKENS with accessories such as Darth Vader’s helmet and a First Order banner and stand. THE BLACK SERIES Pack features a highly articulated and exceptionally detailed Kylo Ren BLACK SERIES figure, as well as the villain’s iconic lightsaber, lightsaber hilt, and helmet. Includes 1 figure and 6 accessories. The STAR WARS: THE BLACK SERIES 6-Inch Kylo Ren Pack will be for sale at Star Wars Celebration 2016 in the Forbidden Planet booth #S1003.

STAR WARS: THE BLACK SERIES 6-Inch Obi-Wan Kenobi Pack
(Ages 4 years & up/Approx. Retail Price: $44.99/Available at Booth #3329 at Comic-Con International in San Diego)
Recreate the noble journey of the great Jedi Master with the highly collectible Obi-Wan Kenobi Pack. Featuring authentic, movie-accurate detail, this elite 6-inch scale Obi-Wan Kenobi figure comes equipped with Jedi robe, 2 lightsabers, an electronic light-up table, and Princess Leia hologram delivering a vital message. Includes 1 figure with multiple points of articulation and 5 accessories. The STAR WARS: THE BLACK SERIES 6-Inch Obi-Wan Kenobi Pack will be for sale at San Diego Comic-Con 2016. Following the convention, a limited number will be available on HasbroToyShop.com. Canadian fans can also purchase the figure set during Fan Expo Canada in September."

I am loving that ANH Obi-Wan!

Episode 10 is up!
-- Posted by Tamer on Friday, July 1 2016
Its a new episode of Customizing the Clone Wars!

A Jedi Commando from Jedi Minstrel!
-- Posted by Tamer on Friday, July 1 2016
"Ka'an Chi'lee was a Knight of the Old Republic about 3574 years before the Battle of Yavin. He was frustrated by the many conflicts along the borders of Republic and Sith space. There seemed to also be small wars popping up in sectors of Republic space. All thru his years as a youngling, then Padawan did he and many of his generation know nothing but years of skirmishes that would unleash evil throughout the known galaxy. He and other Knights were given the mission of helping stabilize a sector of space that was partially annexed by the Sith Empire. They were not to engage the enemy. Unfortunately, that was not the case. Chi'lee and 4 others were the sole survivors of the Jedi commando unit. There were 24 of them."

Sounds like an epic battle. I like the look of his latest offerings a lot!

Jon K is back with a new Sith...
-- Posted by Tamer on Friday, July 1 2016
"And here's the Nihilus to go with my Visas Marr. I usually prefer a lot more articulation than this, but I liked Kylo's sculpt a lot for him, and if there was ever a character that could stand to be represented without much movement, it;s Nihilus.

Recipe: Kylo Ren's TFA body, Nihilus's Evolutions hood, a resin cast of Nihilus's head, and the cape from Asajj Ventress. Saber is Ren's with the crossguard cut off and the hilt repainted."

Wow, that Ren body is perfect for a Nihilus custom! I think it looks great.

Trooper BR Customs shows us a Special Forces Rebel Fleet Trooper!
-- Posted by Tamer on Friday, July 1 2016
"Hi guys, I'm a customizer from Rio de Janeiro, Brazil, and it's a great pleasure to be here. My 1st custom will be a Rebel Fleet Trooper made mainly with Gi Joe parts. The only original Star Wars accessory is the helmet.

I imagined a Special Ops Trooper with modern gear. I made other 2 Star Wars Custom versions based on Rebel Fleet Troopers that I plan to post soon."

Now this is the way to introduce yourself here at ISY. And welcome!

Mr. Jedi 1977 shows us a new batch of vintage carded customs...
-- Posted by Tamer on Friday, July 1 2016
"Ok onward for update # 3 this batch concludes DarthStreams customs card backs ! There's another batch of cards coming as well . Thanks again to everyone viewing and taking the time to comment..."

What a thing of beauty these Vintage Carded Customs are. I love em all, but am really taken with the R5 Imperial Droids!

KRZTFR customizes up a unique dio accessory...
-- Posted by Tamer on Friday, July 1 2016
"Found a 1:12 scale toilet. It was a sour candy powder found at a local candy shop."

I have never seen a custom toilet before and now I have. You have to admit it is pretty cool!

I am Elemental announces 4 of July Sale!
-- Posted by Tamer on Friday, July 1 2016
As you can see if you use the code "COURAGE4JULY" you will get 20% off in-stock items!

I bought all of their action figures so far for my little girl and she plays with them a lot. It is nice to see some AF Offerings for girls! Click here to go see all the fun you can have on their site besides their store too.