September 2015

Need a custom cloak for your 6" Action Figures?
-- Posted by Tamer on Wednesday, September 30 2015
From Jedis to Sith to even Troopers they all would look great with a soft goods cloak. There are quite a few different offerings on eBay right now

I am particularly liking the darker cloak that would work for your Episode VI Jedi Luke or a Sith for that matter from eBay seller rickhor409. He also has a grey, blue, and red version available too. At $7.50 you really can't go wrong!

Ron Hembling is back with some TFA Work...
-- Posted by Tamer on Wednesday, September 30 2015
"Here are my usual outdoor pics and the trooper was painted and weathered using Vallejo and GW paints and Pastels.

The base is from a old DVD container with a foam core insert and then the ground was built up using a mix of plaster of paris, sand and small stones, the larger stones are from the garden and pushed into the plaster mix while still wet.

Once dry I then painted and weathered the base using Vallejo paints and Pastels and the small shrubs are from Army Painter."

I was wondering if he was gonna dabble in any Episode 7 stuff, question answered!

Black Thorne is back...
-- Posted by Tamer on Wednesday, September 30 2015
"Taking of the post's dusty, here is something new;

The first figures from my Post-apocalyptic generic guys."

It was nice to see BT back. Of course his figures look as good as ever! Who new generic would look that fantastic?

Darth Daddy upgrades an older model Falcon...
-- Posted by Tamer on Wednesday, September 30 2015
"If you are like us, and you don't want to spend the money to buy another Millennium Falcon from Hasbro, here is a "Force Awakens" home improvement project that we made with our Star Wars: Power of the Force - Millennium Falcon. Years ago we upgraded our Falcon when the Legacy edition hit stores, so the 1995 released toy was sitting out of view a retired toy. Breathing life into it again was a real blast.

We had to heat the metal pin free from the old dish to get it off the housing, but it pulled apart pretty easily after a few minutes of being boiled in water. We weren't too crazy about the action features in Hasbro's new Millennium Falcon offering. The Nerf feature just felt out of place, and paying for a new dish was much cheaper than the new Falcon's price tag. We do admit that we wish we had the Finn and Chewbacca figures with the headsets! Those are great looking figures.

3D Print Designer TonyRR offers a replacement dish for the Falcon on Shapeways. The 66 mm quad radar dish is not round but square like the Episode VII Falcon. This upgrade is available in Frosted Ultra Detail."

Here is a link to the Radar Dish Darth Daddy was talking about on Shapeways by the way! I would think this would look fantastic on the bigger size Falcon too.

Hot Toys sends work on new 1/6th Scale TFA TIE Pilot...
-- Posted by Tamer on Wednesday, September 30 2015
"The First Order has enlisted a wide range of troops to carry out its will across the galaxy in the upcoming Star Wars: The Force Awakens. Following the reveal of the First Order Snowtrooper, Hot Toys is continuing to expand the First Order army and is delighted to officially present the new streamline designed First Order TIE Pilot 1/6th scale collectible figure from the highly anticipated movie!
The skilled pilots of the First Order launch into combat aboard advanced fighter craft to hunt down enemy vessels and protect space around First Order installations and warships.
The highly-accurate collectible figure is specially crafted based on the image of First Order TIE Pilot in Star Wars: The Force Awakens. It features an all new glossy black color designed TIE Pilot helmet and armor with life support system, meticulously tailored flight suit, detailed blaster pistol, and a hexagonal figure stand with the First Order’s emblem!"

He looks pretty good for me. Look for us to feature this pre-order when it hits Sideshow!

HALCION is creating 6" TFA Beasts!
-- Posted by Tamer on Tuesday, September 29 2015
Brandon just continues to bring a smile to my face with his latest six inch work. He is able to just fabricate anything. What an awesome custom artist! Be sure to take a look at his work and follow him on Facebook!

Ron Hembling gives us a 6" Falcon Dio Update...
-- Posted by Tamer on Tuesday, September 29 2015
"More work done to the Falcon, I'm almost done just need to add a few more greeblies and then the damage and a little sanding on the edges.

The greeblies on the Falcon are from 1/72, 1/35, 1/6 parts from model kits and figures and I have also used plasti card."

I had to include his top down view so you can see he is covering this from every conceivable angle!

Ajunta Pall is still kicking...
-- Posted by Tamer on Tuesday, September 29 2015
"Wow haven't been here posting for some months. Heres a clone commander for starters... lmk what you think
Basic add a head to my Commander Wolffe did a little paint app to add scars and blinded eye for him.

I did another custom Commander Doom (clone wars style helmetless). Enjoy! let me know what ya think."

Bronxstalker gives us a new Clone...
-- Posted by Tamer on Tuesday, September 29 2015
"Here goes my latest clone. After working on the commission, it put me in a clone mood, so I put together this latest clone using what I called throw away parts. It's made using the arms and lower legs of the chunkier saga clones and the torso/upper legs of the animated clones.

I went that route, because honestly, I'm not crazy about how skinny the animated clone figures are, however, after the leg/arm swap....I'm REALLY digging how the clone came out. It's like...a more stylized version of an animated clone, while looking more fierce and less cartoony (don't know if I'm making sense). He's then totally repainted using camo grey (I like it better than just white), blues, weathering and washed."

I sure know what means on that "skinny" animated style. I do like the looks of this new incarnation.

Starchaser is back with a realistic Satine...
-- Posted by Tamer on Tuesday, September 29 2015
"I always thought that Hasbro should have done Satine. I also thought she might look good in realistic style and after having seen a photoshop image of Ewan Mcgregor and Nicole Kidman in the roles, I thought, "use a Mrs. Coulter head from the Golden Compass movie figures." So I put a Mrs. Coulter together with a Black Series Luminara figure (and a lot of paint) and this is what I came up with."

Now this is a fan!
-- Posted by Tamer on Tuesday, September 29 2015
I could definitely be friends with this awesome fan after seeing them build a life sized at-st! Good ole Dan is keeping our Facebook Feed hopping so be sure to give it a look. Oftentimes, you will see additional content in there that may not make it to the forums or our main site.

JKNO showcases a great NYCC Exclusive...
-- Posted by Tamer on Monday, September 28 2015
"- Set of 6 "High Altitude" Death Star modules
- Metal Plaque
- Wall mountable black acrylic
- Prop Story/COA"

Click here to read more about it. I know I will!

I-am-Boba-Fett creates a unique take on a Bith...
-- Posted by Tamer on Monday, September 28 2015
This one is definitely a rather saltry take on the Bith Alien Race. It is up for sale on eBay if you are inclined to add one to your favorite SW Diorama.

BDC41866 is back with some Sith Warriors...
-- Posted by Tamer on Monday, September 28 2015
"I havent made any Darksiders in awhile so here are a couple Sith Warriors. An Arcona and a Devaronian. More to come."

I like the look of the one above. I also like the more to come.

Have you gotten Dorside Toys' Exclusive POP yet?
-- Posted by Tamer on Sunday, September 27 2015
Our sponsor Dorkside Toys' very own first exclusive is the Funko POP Vinyl R2-L3 Astromech Droid. I got one of these in the mail any my daughter promptly claimed it and off to school it went. I had to order a replacement for myself! It has to be the cutest POP I have seen to date.

Don't forget to use Dorkisde Toys to avoid the crowded stores and empty pegs to get all your new items too! Shop either their full Star Wars Section or go to their Episode 7 The Force Awakens Only Section to load up on all the great new Star Wars Goodness.

From great deals on 6" figures to the 3.75" Line Up you know you can count on Dorkside Toys to handle your order professionally and timely with only momc actually packed.

I am also really enjoying the 6" Star Wars other licensee line like the new Revoltech Boba Fett that just rocks and the new Movie Realization Boba Fett in his Samurai Garb I don't see how you can resist. They are also selling and shipping for free the new 6" TFA TIE Fighter with Pilot.

See what I mean? They have it all!

Look what HALCION is up too...
-- Posted by Tamer on Sunday, September 27 2015
The set pieces he is making now for The Force Awakens are just breath taking. I can't even imagine how gaga we would all go if your favorite plastic producer would even give us something remotely similar. Rock on Brandon! Be sure to take a look at our Facebook page where Brandon does a lot of his posting.

I-am-Boba-Fett gives us a new Jedi...
-- Posted by Tamer on Sunday, September 27 2015
"Here's a custom Star Wars TWILEK JEDI MASTER figure. He features an exclusive resin cast head available only from me, a custom lightsaber, custom paint work, and is a poseable custom figure.

He is for sale here."

This is such an awesome looking Jedi. Like I said before this was a mega-update so scroll around once in there.

I-am-Boba-Fett continues his Princess Crossovers...
-- Posted by Tamer on Sunday, September 27 2015
"Here's another Disney princess crossedover into the Star Wars universe. This is a custom Star Wars figure of ELSA from FROZEN AS A JEDI KNIGHT. Features a custom made head, resin cast torso, custom lightsaber, custom paint work, and sculpted sleeves on both forearms. This is a commissioned piece for a customer of mine and was made based loosely upon a reference picture that I was sent."

I bet that is one happy customer.

I-am-Boba-Fett gives us a new Jedi...
-- Posted by Tamer on Sunday, September 27 2015
"Here's a custom BITH JEDI MASTER with a custom resin cast head and a custom Lightsaber. A poseable custom figure with included stand.

He is for sale here."

Wow, what a great looking custom Jedi. And you have a chance to own him! Make sure you scroll around once you get into his customs thread too as there are a ton of updates.

Bronxstalker is back with a Clone...
-- Posted by Tamer on Sunday, September 27 2015
"Hey guys, I was commissioned to do a Commander Ganch in 3.75" scale from a returning customer. Almost done with him, I still need to work on his head underneath. I'm also going to throw in an alternate helmet, which I'm still working on.

It was supposed to be simple repaint using the base figure, but I asked him if I could take it step further and make him more Commander Ganch accurate, but creating the round pauldron, adding the holsters to hang from pauldron, and to create the head underneath to look like baldy Ganch."

He looks spot on to me!

Mandalore25 is back with a new Jedi...
-- Posted by Tamer on Sunday, September 27 2015
"I have an Aqualish jedi today with another orange lightsaber. I like the way he turned out, from the pics it's hard to tell, but he's dark green and black. Sorry about to pic quality this time, took them on my phone."

Well he looks just great to me. I like the take on the lightsaber too.

The Irish Rogue is back with new fan fiction!
-- Posted by Tamer on Sunday, September 27 2015
"Star Wars: The Clone Wars

Oasis Calm -- Volume V Part 2 (Finale)

Having checked left and right, the pilot failed to acquire a firing vector on the incoming droids. “General, I can’t hit them! They’re right beneath us!” A laugh burst with giddy excitement from the causeway! Kindi had never seen combat during his life and reveled in its carnage. He had also never seen a Jedi Master…

Lasers pelted the ground and chased troopers! The squad remained unable to take out the metal giants. This was not due to the B2’s nimbleness, but to the lack of cover which denied clones a place to organize kill box. “Keep the FIRE up and MOVE! One spot is as good as the next!” Urgency was not something Hazoc plead for, but it was heavy in his voice, “Three men down!”

Folks that is just the start of the action. The Clone Wars will never be gone as long as we have the Irish Rogue around. It is just an excellent read!

A great NYCC Exclusive for girls!
-- Posted by Tamer on Sunday, September 27 2015
My gal loves this action figure line. She is gonna love this one. It will be under the tree at Christmas thanks to our roving reporter Dan "The Spectre" Kosa who is gonna make his usually NYCC rounds for us in a few weeks. Thanks Dan!

The Spectre finds the goods at his local Disney Store...
-- Posted by Tamer on Sunday, September 27 2015
I am still trying to get a good boxed version of that Walker myself! I sure can't get em to ship well, but if you have a store close there is a plethora of product to pick up. They usually have good sales going too.

Vote Mark Boudreaux For Toy Designer Of The Year!
-- Posted by Tamer on Friday, September 25 2015
Lets face it, a lot of the cool toys and collectibles we have come from Mark!

"at Kenner Toys and has developed Star Wars product at Hasbro for 38 years. Mark is a Senior Principal Product Designer in Boy’s Toys, and has worked on the six original Star Wars films, EPVII and the Clone Wars and Rebels animated TV series. Mark has designed all five of the 3-3/4” Millennium Falcons, including the new Force Awakens ‘Battle Action” version, and has action figures produced of his likeness."

Need I say more? I sure hope not, lets go show em at the polls!

Starfall previews new web-comic with great new customs...
-- Posted by Tamer on Friday, September 25 2015
"Greetings everyone. I am very excited to announce that in addition to the upcoming novelization of Star-Fall, we are launching a Star-Fall web comic! Star-Fall The Comic will feature an a all new cast and a story set 1,000 years in the past, the events of which will tie into the novelization. With the fantastic art of J. S. Loomis, the comic will be hand drawn and fully inked and colored, with new pages set to drop every 2 weeks or so.

Each main character in the series will be based on its own hand-painted custom action figure, and I will continue to post photos of the figures here in this thread. Here is an ISY exclusive sneak preview of our two main characters from the first run of the web comic.

Meet Rrrouthaan and J'Vaadus."

I am very excited to see where this project goes after getting a small sneak peak into some of the custom character artwork. Let me just say from I have seen so far it is gonna knock your socks off folks!

JDeck reviews the SH Figurarts Luke...
-- Posted by Tamer on Friday, September 25 2015
"I got my SH Figuarts Luke Skywalker figure today. And wow, is this thing cool! Before I get into the review I'd like to say, 1/12 scale is just fantastic. Its definitely the Goldilocks scale of Star Wars figures. You get the articulation and attention to details of 1/6 scale but half the size, making it cheaper and easier to display. Right now is a great time to collect 1/12 figures because you have so many options as far as manufacturers. Black Series, Revoltech, Bandai kits, SH Figuarts and I'm sure I'm missing someone. They all offer something to the 1/12 table. That's why I won't compare the SH Luke to the TBS one because they're not in the same ballpark, or even on the same planet."

And folks, that is just the start of the review!

Unreality is back with a great new custom AT-ST...
-- Posted by Tamer on Friday, September 25 2015
"Forgot to share this with you guys. This is my take on Bandai's 1/48 AT-ST model modified to look like Kai Lim's artwork. This version features new turrets, spotlight, winch, and a new roof blaster with a Snowtrooper chillin."

Folks, this images just won't do the small detail enough justice as it is over the top awesome! There is not an area on this that has not been touched up or redone. Wow!

Ben Alius updates us on his wooden B-Wing Project...
-- Posted by Tamer on Friday, September 25 2015
"Building is done! It came out a little too big, but it works for me.

The cockpit was the most challenging, but it looks nice I think. And... it turns!"

What a cool project. Make sure you scroll through his other projects too. Daunted by the high costs of Star Wars Toys these days and wanting to give his son the SW Toys he wanted he just created his own wooden line that in my opinion far exceeds many of the licensed toys out there!

Ben Alius continues his DarthDays Project on Cartoonist: George Folz...
-- Posted by Tamer on Friday, September 25 2015
What a great graphic by said artist to wish you good luck on a Friday! BA continues to load up this thread with fantastic artwork.

Big Bad Toy Store lists great new Star Wars Items!
-- Posted by Tamer on Thursday, September 24 2015
HOT TOYS EPISODE VII SNOWTROOPERS
The latest generation of Snowtrooper is equipped with completely redesigned advanced insulated armor and helmets that can reduce the glare of icy terrain when carrying out the First Order’s missions in extreme climate. The highly-accurate collectible figures are specially crafted based on the image of First Order Snowtrooper in Star Wars: The Force Awakens. Each Snowtrooper features a brand new designed Snowtrooper armor, helmet, and backpack. The standard First Order Snowtrooper will be equipped with a blaster rifle with extended stock while the First Order Snowtrooper Officer is armed with a blaster rifle with extended stock, a pair of articulated binoculars, and a red color pauldron that indicates the rank of officer. Two additional blaster rifles are included exclusively in this collectible set! Snowtrooper is $214.99, Snowtrooper Officer is $219.99 and the Set is $389.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=hot%201/6%20vii

GENTLE GIANT JUMBO STAR WARS
Just like they were when you were a kid, only BIGGER! The latest additions to the exciting line of vintage Kenner-inspired Star Wars Action Figure reproductions are Princess Leia Organa (Boushh Disguise), Admiral Ackbar, and Wicket W. Warrick. Each figure was digitally scanned from the Kenner originals and reproduced to jumbo size; with articulation and character specific accessories also included. $71.99 each
http://www.bigbadtoystore.com/bbts/search.aspx?search=gentle%20giant%2012%22%20star%20wars

FIRST ORDER STORMTROOPER ARTFX+ SET
The inaugural ARTFX+ from Star Wars Episode VII: The Force Awakens is the First Order Stormtrooper Set! Create up to 12 variant poses with the included Blaster Rifles (long and short). This pre-painted statue kit is easy to assemble in seconds for display. Magnets on the bottom of the feet allow for stable arrangements on the base next to other characters. $74.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=KOT11434&mode=retail

NEW STAR WARS EGG ATTACK FIGURES
We have just listed the newest additions to the Star Wars Egg Attack Action Figure lineup: the Episode V Stormtrooper and Episode IV Sandtrooper. These 6–inch action figures have over 24 points of articulation, allowing collectors to display the figures in a variety of poses. The expert paint applications perfectly represent the texture of the Stormtrooper’s armor and the desert weathering of the Sandtrooper’s armor. The Stormtrooper comes with the classic E-11 blaster and DLT heavy blaster while the Sandtrooper comes with the classic E-11 blaster, T-21 light repeating blaster rifle, and the SD-48 survival backpack. $129.99 each
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20wars%20egg%20attack

STAR WARS EPISODE VII METAL EARTH MODEL KITS
These amazingly detailed DIY models start as 4-inch square steel sheets and finish as amazing 3-D models. Use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points! Complete your Star Wars Metal Earth Model collection with these all new ships from the upcoming Star Wars Episode VII: The Force Awakens including Kylo Ren’s Command Shuttle, Special Forces TIE Fighter, First Order Snowspeeder, and Poe Dameron’s X-Wing Fighter. $11.99 each
http://www.bigbadtoystore.com/bbts/search.aspx?search=episode%20vii%20model%20kit

Starchaser revisits a previous custom figure...
-- Posted by Tamer on Thursday, September 24 2015
"I have finally been able to add the finishing touches to my Jenn Starchaser figure (as originally seen below):

I added a concept stormtrooper shield and a senate commando helmet (I've always been partial to the Corinthian style helmet). Painting the helmet was a bear because the plastic is so soft and slick. Anyway, while the colors don't show up perfectly, the blue on the helmet basically matches the tunic and there is a gray stripe as well. I think it ties the figure together well and looks more complete to me."

I liked the look before, but his additions I do agree complete it well. It sure makes a more knight like look to me too.

BDC41866 adds more great kit-bashes to Big Padawan Customs...
-- Posted by Tamer on Thursday, September 24 2015
"Ill be posting a few new bounty hunter kitbashes tonight. First up is this colorful character, Solitus Tyree. I am so enjoying my new Dremel. Took an old Shadows of the Empire Swoop Bike pilot, cut off the head dremelled it out and used it here. Colors worked out really well. More to come."

And more there were. He also showcases how sometimes its just about the parts and how you put em together. bdc41866 has been doing it for awhile now and shows (look at the back of this one) that he covers things from every angle.

Darth Crassus is back with a new Bandai Project...
-- Posted by Tamer on Thursday, September 24 2015
"Because I liked the R2-D2 model kit so much, I got the C-3PO Bandai model kit. As with R2, this figure is perfectly in scale with the Hasbro Black Series 6'' figures. As Hasbro hasn't even released any version of 3PO in this scale yet, this model fills a big hole in my collection.

The model is fairly well articulated - well, about as well as 3PO is ever articulated. It comes with two sets of arms, articulated and non-articulated. I repainted one of the left arms red to match his appearance in The Force Awakens. He also comes with an alternate head (one without a dent) and a chest plate with a restraining bolt.

The model was a bit more difficult to put together and sometimes the gold finish got a bit chipped as I cut pieces from the plastic rack, but overall I love how he looks."

Jedi Minstrel explores a what if...
-- Posted by Tamer on Thursday, September 24 2015
"Here's is one of the most simple, yet effective customs I've done.

Palpatine never became chancellor, never emperor, and never a Sith Lord. He was found by accident by a knight and her padawan as they were assigned to a mission to Naboo. There they met with some of the noble houses. As they were introduced to the Palpatine family, they felt the Force emanating from their new baby. The request was made that the child be taken to Coruscant to begin Jedi training. House Palpatine was hesitant but in the end, they let him go and Palpatine would become not the bringer of the end of the Jedi Order but a forward thinker that would bring some reform to the Order. He dies at the age of 115 and during his time on the Jedi Council and for decades to come, there was peace throughout the galaxy. No wars, just minor conflicts that were resolved with help from the Jedi and the sense of cooperation the Jedi brought to the galaxy.

This is just a simple head swap."

Jedi Minstrel shows its not always about excessive, but simple and effective. I also love the back stories he creates for his characters.

Have you seen Most Wanted Collectible's Star Wars Section?
-- Posted by Tamer on Wednesday, September 23 2015
If not you are missing out on over 230 products, many of which are at deep discounts that you will not be able to find anywhere else. From Gentle Giant to Acme Archives, etc. you can count on Most Wanted Collectibles to list the high end items you demand for your collection.

Rest assured your order will be handled promptly and professionally and show up to your door in awesome shape. Personally I have never had an issue with any order. I have even been contacted by MWC's Customer Service just to make sure some items I ordered showed up ok. I liked that a good bit!

Starfall is back...
-- Posted by Tamer on Wednesday, September 23 2015
"Greetings everyone. I am very excited to announce that in addition to the upcoming novelization of Star-Fall, we are launching a Star-Fall web comic! Star-Fall The Comic will feature an a all new cast and a story set 1,000 years in the past, the events of which will tie into the novelization. With the fantastic art of J. S. Loomis, the comic will be hand drawn and fully inked and colored, with new pages set to drop every 2 weeks or so.

Each main character in the series will be based on its own hand-painted custom action figure, and I will continue to post photos of the figures here in this thread. Here is an ISY exclusive sneak preview of our two main characters from the first run of the web comic.

Meet Rrrouthaan and J'Vaadus."

I look forward to seeing this new comic!

Stronox is back with a Boba...
-- Posted by Tamer on Wednesday, September 23 2015
"Continuing on with my Star Wars concept designs utilizing GI Joe articulation and parts I present the man himself Boba Fett...Thanks for taking a look!"

This one is also up for sale on eBay if you are interested. He sure blows away most versions I am aware of. Customizers just put the action in action figures.

CHEWIE shares a new chapter of the Enloe Trials...
-- Posted by Tamer on Tuesday, September 22 2015
"I wanted to share another adventure in the story of Rykrof Enloe with my friends here at ISY... read through, and please be sure to share your thoughts!"

Folks, our photo-novelists just do a bang up job creating new Star Wars Stories simply to bring us more enjoyment with our hobby. Please take a few minutes to read their work and comment as it is a huge undertaking to put one of these together!

Ron Hembling gives us a 6" Falcon Dio Update...
-- Posted by Tamer on Tuesday, September 22 2015
"Did some more work on the Falcon today. I redid the circular part and removed about 1/2 and inch of the end and then used cardboard to make the tiles. I also did the mid section using foam core and plasti card and the gun turret section of the AMT Falcon kit.

I also decided to added a little bit of the hull to both sides of the hatach section by using foam core and this will be covered with card board and then greeblies will be added."

Man this is gonna be great! Heck, it already is. Is there anything Ron can't do? Sure doesn't look like it from where I am sitting.

Ben Alius starts up a B-Wing Project...
-- Posted by Tamer on Tuesday, September 22 2015
"The first wing is installed... That was a pretty nasty thing to build. Normally I don't build moving parts, but with the B-Wing it would not make any sense because the folding wings are to typical for the design."

I love the scale of this already. It is gonna be huge! No doubt his son already has a big ole smile on his face. Such a cool wooden Star Wars Line he is creating!

Ghost Skull 18 shows us a new TFA Custom...
-- Posted by Tamer on Tuesday, September 22 2015
"Added a loki head to make an unmasked version."

His version of Kylo Ren looks pretty good to me. I am kinda wishing they had used the actor that played Loki as our new bad guy!

Commander Kurgan shows us a great kit-bash...
-- Posted by Tamer on Tuesday, September 22 2015
"By speaking of kitbashes: here's the first figure in a series of early Alliance era resistance fighters.
You'll recognize the TVC Bespin Luke as basic figure, GI Joe POC Duke's head (one of the nicest male stock sculpts, I think), GI Joe Resolute Siberia Duke's gloved hands, feet from a TAC Rahm Kota, bandolier and rifle from two TVC aliens."

Tell me thats not a figure you would buy if you saw it on the pegs! Sometimes its not about hard or paint or sculpting. Put good parts together that move and everyone is happy!

Oh Hasbro, we need one of these in the six inch line!
-- Posted by Tamer on Tuesday, September 22 2015
I just saw this posted on our Facebook Page and had to post on it. See how great even a repaint of a TIE Pilot and some slight helmet modifications looks like! Fantastic!

Dan shares his images from Disney...
-- Posted by Tamer on Tuesday, September 22 2015
Dan "The Spectre" Kosa just got back from a trip to Disneyland over the weekend and reports back on all the cool Star Wars Items he saw while there.

Jake James shows you a quick, easy, and cool playset!
-- Posted by Tamer on Tuesday, September 22 2015
I saw this on Facebook yesterday and knew I had to post on it. The great thing is you can also store your figures in it after you are done too! It is ideas like this that keep me rolling while we figure out what Hasbro ever meant by kind of saying yes to playsets in our Q and A's with them from a year or so ago!

I-am-Boba-Fett round 6...
-- Posted by Tamer on Monday, September 21 2015
This has sure turned into the day of I am Boba Fett thats for sure!

I-am-Boba-Fett round 5...
-- Posted by Tamer on Monday, September 21 2015
I really like the looks of this Droid. He looks like he can hold any position too.

I-am-Boba-Fett round 4...
-- Posted by Tamer on Monday, September 21 2015
What can I say, he has a huge update!

I-am-Boba-Fett round 3...
-- Posted by Tamer on Monday, September 21 2015
Wouldn't you love to have a GONK like this! Well click the link and you can!

I-am-Boba-Fett round 2....
-- Posted by Tamer on Monday, September 21 2015
I know I am gonna run out of time to feature em all this morning, but here is another you can own!

I-am-Boba-Fett gives gives us a huge update...
-- Posted by Tamer on Monday, September 21 2015
"Here's a custom Star Wars FEMALE HOTH COMMUNICATIONS TECH figure. She features custom paint work, datapad, and a custom made ENERGY HARVESTER UNIT accessory. She is up for sale here."

Folks, that is just a drop in the bucket for all the cool customs he uploaded today. Click here to get in there and see it all!

JDeck starts up Bandai Model Reviews...
-- Posted by Tamer on Monday, September 21 2015
"I decided to go ahead and do reviews on these Bandai Star Wars kits. I won't go through the actual build, just the overall review. Highlighting the pros and cons of the kit and how it stacks up to other manufacturers. If you've never put a model kit together these kits are very simple. These kits are designed for children, I think everyone on here is smart enough to build these. They require a slim amount of patience and common sense. No glue and no paint required."

His first one is the Bandai Scout trooper and Speederbike. I can't wait to see him go over these.

Have you gotten Dorside Toys' Exclusive POP yet?
-- Posted by Tamer on Sunday, September 20 2015
Our sponsor Dorkside Toys' very own first exclusive is the Funko POP Vinyl R2-L3 Astromech Droid. I got one of these in the mail any my daughter promptly claimed it and off to school it went. I had to order a replacement for myself! It has to be the cutest POP I have seen to date.

Don't forget to use Dorkisde Toys to avoid the crowded stores and empty pegs to get all your new items too! Shop either their full Star Wars Section or go to their Episode 7 The Force Awakens Only Section to load up on all the great new Star Wars Goodness.

From great deals on 6" figures to the 3.75" Line Up you know you can count on Dorkside Toys to handle your order professionally and timely with only momc actually packed.

I am also really enjoying the 6" The Force Awakens Pre-Orders like the TFA Wave 2 that includes Constable Zuvio, Poe Dameron, Captain Phasma, and the Guavian Enforcer. They are also selling and shipping for free the new 6" TFA TIE Fighter with Pilot.

See what I mean? They have it all!

The Hot Toys 1/6 Snowtrooper Captain is available for pre-order too!
-- Posted by Tamer on Sunday, September 20 2015
You knew this one was coming. I am telling you I don't know how a person can resist these. They are so McQuarriesque!

Click here to go pre-order one today!

The Hot Toys 1/6 Snowtrooper and Captain are up for order now too!
-- Posted by Tamer on Sunday, September 20 2015
Can you see I am on a Hot Toys Kick today? Man I am really liking the looks of these guys. Click here to go get your set!

The Hot Toys 1/6 Snowtrooper is up for pre-order!
-- Posted by Tamer on Sunday, September 20 2015
I am loving these FO Counterparts to our beloved Hoth Snowtroopers. Click here to go get one or multiples!

Mandalore25 makes me realize how much I miss KOTOR...
-- Posted by Tamer on Sunday, September 20 2015
More great Alien Jedis. Man, that was an awesome video game. Heres to hoping the new video games are even a fraction as good as some of the older ones. Till then go marvel at M25's great custom figures!

Mandalore25 has even more Alien Jedis!
-- Posted by Tamer on Sunday, September 20 2015
Click on the pic and link above to go add this one to your own personal collection!

Starchaser is back too!
-- Posted by Tamer on Sunday, September 20 2015
"So summer is over and I've got a few simple customs in the works, but not a lot of time. I did put this character together.

Nole Kironix - a Snivvian poet whose political satire earned him a bounty from the Empire, so he joined the Alliance to Restore the Republic (and Freedom of Speech). Being a cold weather species, the Alliance quickly put his natural hardiness to use as a scout on cold weather planets. Nole scouted Toola, Ordo Plutonia, Rhen Var and Hoth (among others)."

I like the recipe and overall look of this one. I could see him being at home in any Hoth Dio. It would be cool to see a Hoth Hat to go with this one!

Mandalore25 is back with a new Jedi...
-- Posted by Tamer on Sunday, September 20 2015
"Made a Pacithhip Jedi. Drilled out Ketwol's head to make it work on a ball joint.

If anyone is interested, he's listed here."

Looks pretty wild to me. I love the looks of Alien Jedi!

UPDATE! He has just listed two new Alien Jedis that you can find listed on our Facebook Page and add them to your collection if you wish.

Stronox returns after an absence!
-- Posted by Tamer on Sunday, September 20 2015
"Hi guys! It has been a lllooonnnggg time! Life sometimes does that to ya...Anyways I wanted to show my latest in a line of SW customs that I am doing utilizing all GI Joe articulation and also adding my own style to characters. This is my latest fig, Darth Bane done in the flavor of Clone Wars with a less animated look to him. Hope you guys like him and thanks for looking!!"

Well first off it is great to see you back Stronox. Second, it is one awesome looking new custom and I love the movement in this. Third folks, you can add this one to your collection as he has him listed on eBay!

Dan finds out some news about the DROID Factory at Disneyland...
-- Posted by Tamer on Sunday, September 20 2015
As you can see all is not exactly great, but Dan did score a deal!

HALCION just keeps on rockin...
-- Posted by Tamer on Saturday, September 19 2015
All I can say is keep on a going Brandon. All of here, and I am talking about custom world in general, are loving the things you are pulling off in whatever scale you set your mind too!

Dan is headed to Florida...
-- Posted by Tamer on Saturday, September 19 2015
And he is gonna cover all the Star Wars News and Stuff he sees why there. I mean this is what he found at the airport!

BDC41866 gives us a super articulated Rey!
-- Posted by Tamer on Friday, September 18 2015
"My entry is Rey from Starkiller Base. As for the parts, the base body is the Padme Amidala Black Series from Episode II. Head is the original Rey 5 POA figure. The arms are from the pregnant Padme (Revenge of the Sith) as well as the lower legs (knees down). I used Elis Helrots scarf for Reys lower pantaloons. and a neck scarf from Sharad Hett. Also included the 5 POA Reys staff weapon."

Yepper, now that is a Rey I can get excited about. Thats a great recipe folks. Make sure you read the full challenge details as its our Birthday and were giving you a party!

I-am-Boba-Fett is back with a new Mando...
-- Posted by Tamer on Friday, September 18 2015
"Here is another custom Star Wars WAD'E TAY'HAAI Mandalorian figure made awhile back but never posted. Wad’e Tay’haai was one of seventy-five Mandalorian warriors that were comprised of the Cuy'val Dar and was one of the trainers for the Clone Troopers and appears in the Republic Commando books. Features: custom made Mandalorian Spear and battle flute accessories."

Lovin those Mandos he is creating lately. All the accessories and his use of magnets for attaching is amazing!

Mandalore25 is back with some new Sith...
-- Posted by Tamer on Friday, September 18 2015
"A customer requested this Darth Zannah, this would be the third Darth Zannah I've made, and I think it might be my best yet. She looks pretty cool by my comic style Darth Bane too."

Man, these just look like the epitome of evil. The eyes especially showcase that Sith look in my opinion.

Gurt is back with some custom Younglings...
-- Posted by Tamer on Friday, September 18 2015
"New Padawan and Youngling custom bashing.

Rodian, Arcona, Patrolian, Clawdite, Ithorian, Wookie, and a made up alien race. Can you tell which figures I popped to get the heads/bodies?

Had to dig back in after getting so disappointed in Hasbro 3.75" 5POA figures. Blah! It is like Mattel bought them...

96 days and counting."

Ain't that the truth! Well at least it gives customizers some great opportunities to show their stuff!

McRobo Creations is back with a to scale Star Destroyer!
-- Posted by Tamer on Friday, September 18 2015
"Imperial Star Destroyer:
Full interior playset
Light-up thrusters
Working manual elevator
Hologram Emperor
Loading ramp
Side hangar door
Detachable bridge to access the 5 lower floor halls
Duel posable removeable lids
Glow in the dark paint
Dimensions: 6' x 31" x 18"

We put 160 hours into it. The materials were mostly ABS Flat Plastic (Styrene).

We've been uploading pictures as we worked, and the most current are at the top of the page."

I will try to figure out some appropriate comments as I try to find my sanity again. Wow!

Its the Return of the Clones for Star Wars REBELS!
-- Posted by Tamer on Friday, September 18 2015
"Star Wars Rebels" returns WEDNESDAY, OCTOBER 14 (9:30 p.m., ET/PT) on Disney XD.

Follow @DisneyChannelPR and @StarWars for the latest news on #StarWarsRebels, and check out StarWars.com for more exciting news on the series.

It wouldn't be a great day without a post from HALCION...
-- Posted by Tamer on Friday, September 18 2015
Look at what he is up to now! What can I say about his work that I haven't said? Why I wonder about that, just enjoy.

More on the Hot Toys 1/6 Snowtrooper...
-- Posted by Tamer on Friday, September 18 2015
I had time to even get the last email from Hot Toys up here. Talk about a fantastic set in both the regular First Order Snowtrooper and the Snowtrooper Captain. I don't know how you couldn't get at least one of each and probably multiples of that Snowtrooper!

Hot Toys previews their 1/6 Scale Snowtrooper...
-- Posted by Tamer on Friday, September 18 2015
I can't wait to see this character is action on December 18th. Hot Toys is just killing their Star Wars Line this year!

More Hot Toys Snowtroopers!
-- Posted by Tamer on Friday, September 18 2015
This time its a set. Wow, these look great to me. Let me go look at more of the emails they sent.

I get in an email about new Hot Toys Products...
-- Posted by Tamer on Friday, September 18 2015
First up is the Snowtrooper Captain. Wow, this looks fantastic to me. I am not sure how much time I will have to get all these new products listed this morning, but I had to at least show you fine folks this one!

Candy Blues is back with an update...
-- Posted by Tamer on Friday, September 18 2015
"Hey guys! So i haven't vanished after all! been really busy with life stuff...But im steam rolling work on Plagueis. Also Planing future projects, as well as characters based of the same book... ;) This is just a preview. Here is a shot of my prepped molds for parts. Ill be putting a Video together on how my ill be putting my flexible hands together for Plagueis. So im looking to put that up for people. Ill be back soonish."

It was good to see him back. Those hands for Plagueis look fantastic.

Looks like the Toy Shop has a Fall Code
-- Posted by Tamer on Friday, September 18 2015
15% off if you use it during checkout!

Gentle Giant sends their September Newsletter...
-- Posted by Tamer on Friday, September 18 2015
Well I guess you could call it a newsletter. I am kinda wondering when we will see some TFA Stuff, but this new Sandtrooper Statue looks pretty good. The PG version even included a little desert creature. I am not sure its a womp rat, but you can make up your own mind.

New Exclusive Two Pack for the 6" Line...
-- Posted by Tamer on Friday, September 18 2015
It looks like another UK Exclusive to Argos, courtesy of our friends at Jeditemplearchives.

Big Bad Toy Store lists great new Star Wars Items!
-- Posted by Tamer on Thursday, September 17 2015
END OF SUMMER SALE
Taking advantage of these sunny deals will help you enjoy the last remaining days of summer and find items at prices that are just too good to pass up!
http://www.bigbadtoystore.com/bbts/list.aspx?list=19438

STAR WARS EPISODE VII AIR HOGS
Now you can make the Kessel Run in less than 12 parsecs with the most iconic ships in the Star Wars universe right in your own backyard! These ships are constructed from impact resistant foam making them resilient to a few photon torpedo hits (or crashes)! The Millennium Falcon Quad features LED lights and sounds and 4-ducted propellers for $119.99, the X-Wing Fighter features a 250+ foot flying range for $79.99, and the RC Millennium Falcon features gyro-stabilization and a single rotor Powercore Drive Train for $59.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20wars%20air%20hogs

FIRST ORDER STORMTROOPER ARTFX+ SET
The inaugural ARTFX+ from Star Wars Episode VII: The Force Awakens is the First Order Stormtrooper Set! Create up to 12 variant poses with the included Blaster Rifles (long and short). This pre-painted statue kit is easy to assemble in seconds for display. Magnets on the bottom of the feet allow for stable arrangements on the base next to other characters. $74.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=KOT11434&mode=retail

NEW STAR WARS EGG ATTACK FIGURES
We have just listed the newest additions to the Star Wars Egg Attack Action Figure lineup: the Episode V Stormtrooper and Episode IV Sandtrooper. These 6–inch action figures have over 24 points of articulation, allowing collectors to display the figures in a variety of poses. The expert paint applications perfectly represent the texture of the Stormtrooper’s armor and the desert weathering of the Sandtrooper’s armor. The Stormtrooper comes with the classic E-11 blaster and DLT heavy blaster while the Sandtrooper comes with the classic E-11 blaster, T-21 light repeating blaster rifle, and the SD-48 survival backpack. $129.99 each
http://www.bigbadtoystore.com/bbts/search.aspx?search=star%20wars%20egg%20attack

STAR WARS EPISODE VII METAL EARTH MODEL KITS
These amazingly detailed DIY models start as 4-inch square steel sheets and finish as amazing 3-D models. Use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points! Complete your Star Wars Metal Earth Model collection with these all new ships from the upcoming Star Wars Episode VII: The Force Awakens including Kylo Ren’s Command Shuttle, Special Forces TIE Fighter, First Order Snowspeeder, and Poe Dameron’s X-Wing Fighter. $11.99 each
http://www.bigbadtoystore.com/bbts/search.aspx?search=episode%20vii%20model%20kit

STAR WARS UNCLE MILTON
Now you too can learn the ways of the Force and hone your Jedi skills with the new Star Wars Science sets from Uncle Milton. Move holograms with the power of your mind, suspend and move objects in mid-air, create your own UV laser light battles, test your knowledge of the Star Wars universe against the Jedi Holocron, and grow your very own Lightsaber crystal. $19.99-$109.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=STAR%20WARS%20UNCLE%20MILTON

STAR WARS VOICE CHANGER HELMETS
The helmets use state-of-the-art electronics to alter the user’s voice to sound like the Sith Lord Darth Vader and the dark warrior villain Kylo Ren. The Darth Vader helmet also plays signature movie phrases and breathing sound effects to add to the adventure. Darth Vader is $39.99 and Kylo Ren is $74.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=VOICE%20CHANGER

STAR WARS EPISODE VII POE DAMERON’S X-WING
Battle the First Order head on in Poe Dameron’s X-Wing! Lead Black Squadron into battle with this starfighter equipped with projectile cannon, opening and closing wings and an exclusive 3.75-inch special edition Poe Dameron figure. $49.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=HAS24724&mode=retail

STAR WARS EPISODE VII CAPSULE COLLECTIONS
Collect all new figures, mascot keychains, bottle caps and blister card mini figures based on the upcoming Star Wars Episode VII: The Force Awakens characters. Each Bag of 10 capsules contains a random assortment of Desktop Stormtrooper figures, Mascot Keychains, Bottle Caps, or Mini Blister Figures. $29.99 each
http://www.bigbadtoystore.com/bbts/search.aspx?search=EPISODE%20VII%20CAPSULE

STAR WARS EPISODE VII KITCHENWARE
Expand your Star Wars kitchenware selection with these all new items based on the upcoming Star Wars Episode VII: The Force Awakens. Enjoy your takeout with the Kylo Ren cross-guard Lightsaber Chopsticks for $10.99; or have the most awesome sandwiches in the cafeteria with the BB-8, First Order Stormtrooper, and Millennium Falcon Sandwich Shapers for $16.99 each.
http://www.bigbadtoystore.com/bbts/search.aspx?search=STAR%20WARS%20KITCHENWARE

STAR WARS EPVII CLASS I DELUXE VEHICLES
Launch into action and adventure in the world of Star Wars! Discover exciting stories of good versus evil in a galaxy of starships and vehicles. For quick transportation across the junk-strewn dunes of Jakku, Rey relies on her old salvaged speeder. Rey’s Speeder Bike vehicle comes with a special edition Rey figure and an accessory. Armed with proton bombs and laser cannons, the prototype Y-wing Scout Bomber uses its rotating engines to provide enhanced maneuverability during flight. The Y-wing Scout Bomber comes with a special edition Kanan Jarrus figure and 3 accessories. Set of 2 is $52.99.
http://www.bigbadtoystore.com/bbts/product.aspx?product=ZRTY10033&mode=retail

Darth Crassus creates a great R2...
-- Posted by Tamer on Thursday, September 17 2015
"I made an R2-D2 from a Bandai model kit. Before building, I sprayed the dome with chrome paint before painting to give it a nice sheen. I then added some weathering in line from what we've seen of R2 from the Episode VII promo photos. It was an easy build.

The model is as articulated as a TBS action figure, so you can put him in different poses. Best of all, it's perfectly in scale with the 6'' action figures, making it a great replacement for the underwhelming TBS 6'' R2 Hasbro made."

Now, I am not the sharpest knife in the drawer some days, but I am sensing a theme here this morning?

JDeck compares the Bandia 6" Stormtrooper Kit to its Hasbro Counterpart...
-- Posted by Tamer on Thursday, September 17 2015
"I built a Bandai stormtrooper today, I haven't put the decals on yet because I'm waiting for my microset to come in. I'll get into that later. Just look at the comparison between it and the Black Series Stormtrooper, its just amazing. The proportions of the bandai stormy is spot on as for the Black series he looks sickly. Also I like the smokey green lenses and the shiny white poly-styrene armor. The Black Series is dull with that painted vinyl plastic. Like I said I'm REALLY picky when it comes to Stormtroopers. They have to be right, and this Bandai kit is right."

He also goes on to describe a product called micro-set and how he is going to apply some decals. Great stuff. Too bad those Bandai Kits aren't gonna be sold in the US anymore!

The second half of the Toys R Us notification...
-- Posted by Tamer on Thursday, September 17 2015
Looks like November will be the time to start looking for the Desert Deco FO TIE Fighter we have been hearing about.

Toys R Us sends me an email
-- Posted by Tamer on Thursday, September 17 2015
And this is the top half of the pic.

New Battlefront 6" Exclusive Trooper previewed...
-- Posted by Tamer on Thursday, September 17 2015
Looks like this is only available for order in the UK right now, but look for more information as we find out how it becomes available in the US. Looking for around a March 2016 release date.

Amazon.com lists the Vader Edition PS4 Bundle!
-- Posted by Tamer on Wednesday, September 16 2015
Well it is time to get ready for November 17th when this officially releases! If you order it from Amazon.com you will get it shipped early so it will be on your doorstep by the release date. And remember, this is the PS4 that comes in the special Vader Deco.

Have you seen Most Wanted Collectible's Star Wars Section?
-- Posted by Tamer on Wednesday, September 16 2015
If not you are missing out on over 230 products, many of which are at deep discounts that you will not be able to find anywhere else. From Gentle Giant to Acme Archives, etc. you can count on Most Wanted Collectibles to list the high end items you demand for your collection.

Rest assured your order will be handled promptly and professionally and show up to your door in awesome shape. Personally I have never had an issue with any order. I have even been contacted by MWC's Customer Service just to make sure some items I ordered showed up ok. I liked that a good bit!

HALCION just keeps after it...
-- Posted by Tamer on Wednesday, September 16 2015
Wow is he just killing the six inch custom line or what! Take a look at his Kylo Ren. The light saber itself is for the win!

BDC41866 is back with more custom figures...
-- Posted by Tamer on Wednesday, September 16 2015
"New customs time! Ill be posting a few tonight. Time off well spent. First up is a female Aqualish Rebel Alliance officer. More to come."

I like the looks of her and he did indeed showcase a few more customs with his latest update. Thank link above will get you started.

Koth is back with an update...
-- Posted by Tamer on Wednesday, September 16 2015
"Here are a few customs inspired by Force Friday.
C3PO, Chopper, Lasat and Trandoshan.

The Zeb/ Chopper set went to making these guys. I wanted another Chopper to repaint. I've included the Courier again."

It is nice to see him back around!

Ron Hembling gives us a new dio update...
-- Posted by Tamer on Wednesday, September 16 2015
"Did some work on the ramp today. I used plasti card for everything except the ramp itself which is foamcore and also did a little work on the hull by adding plasti card to the lower section and also inside the ramp section."

You can already see how amazing this is gonna be. Man it must be nice to just fabricate stuff like this from scratch!

HALCION continues to amaze...
-- Posted by Tamer on Wednesday, September 16 2015
His Episode 7 Custom Figures just keep getting better and better and larger and larger. Shared on our Facebook Page you can see how great they are.

Wal-Mart offering a Fridge Vader PS4 Bundle...
-- Posted by Tamer on Wednesday, September 16 2015
This one is gonna sell out soon no doubt. Who wouldn't want a Han in Carbonite mini-fridge to go along with the new Battlefront. It only holds six cans, but what a way cool collectible!

One of the cutest POPS I have ever seen...
-- Posted by Tamer on Tuesday, September 15 2015
Our sponsor Dorkside Toys' very own first exclusive is the Funko POP Vinyl R2-L3 Astromech Droid. I got one of these in the mail yesterday and my daughter promptly claimed it she even thought is was so cute. She is already planning on taking this one to school today.

If you need an awesome gift for the Star Wars Fan in your life, or a cool stocking stuff this is the go to item of the year if you ask me. And once again we want to wish Dorkside Toys a very hearty congratulations on their first of many exclusive items they will bring us in the coming years.

HALCION for president I say!
-- Posted by Tamer on Tuesday, September 15 2015
See what I mean about his six inch work. Here is a new Flamethrower Trooper he cobbled together from both the Disney Die-cast and the 6" Hasbro Line. Utterly amazing!

HALCION just making things better...
-- Posted by Tamer on Tuesday, September 15 2015
His work in the six inch line, both in scratch built vehicles and custom action figures is fantastic. I don't think there is anything he can't build. Hasbro I sure would love you to hire this guy!

Sith Fire 30 still turning heads...
-- Posted by Tamer on Tuesday, September 15 2015
His Nostromo Diorama is still the stuff of legend. The level of detail is unparalleled in any scale dio I have seen and I have seen a few folks. Clicking on the images above will get you into his Facebook Page.

I-am-Boba-Fett gives us some new Mandos...
-- Posted by Tamer on Tuesday, September 15 2015
"Made both of these custom Star Wars Mandalorians for a customer last year. Here is a custom Mirta Gev action figure and a custom Ghes Orade action figure.

Custom MIRTA GEV figure features:

- Resin cast head chosen to resemble reference art I was asked to make her look like
- Sculpted shoulder bell details
- Sculpted stomach area
- Sculpted belt buckle
- Resin cast pouches on belt
- Holster and pistol added to belt
- Sculpted cape sections at the shoulders
- Sculpted neck area
- Custom paint work
- Magnetically attached cape
- Helmet was made to be interchangeable and it now fits onto the neck peg itself

Custom GHES ORADE figure features:

- Custom sculpted hair and beard on this figure's head based on reference artwork I was asked to make this custom figure resemble
- Custom paint work including the helmet and entire figure
- Custom sculpted thigh armor
- Custom Blaster pistol
- Helmet was made to be interchangeable and it now fits onto the neck peg itself"

That Mirta Gev is off the charts awesome. You need to see her with her helmet off too. Just great work all the way around.

MAXX Replicas finishes his 6" The Force Awakens Dio...
-- Posted by Tamer on Monday, September 14 2015
"Here some preview pictures of the finished diorama.

Next weekend on the Rebel Con V (www.rebelcon.de) I can make some new pictures WITH the matching 6" figures."

It looks spot on with the screen shot he used to create it if you ask me!

Ron Hembling starts a partial Falcon Dio...
-- Posted by Tamer on Monday, September 14 2015
"With the Shuttle in drydock waiting repair I decided to start a new project and decided to make a partial Falcon dio with the ramp section, I won't be making it 100% movie accurate as I'll be using bits and pieces in my parts bin.

The hull has so far been made out of foam core and will have plasti card built over the top of that and will have a small base that it will be secure to."

You can already see the wonderful potential for this one.

Ben Alius finishes his SW Freighter!
-- Posted by Tamer on Monday, September 14 2015
"The ship is now done! It did not end up exactly like I wanted it to be, but I'm satisfied with the end result.
I call it "Aeolus Arnasa" Here are the final pictures!"

I turned out fantastic folks. Make sure you click through and see the full image finale. The playability with this one is off the charts cool.

Gold Leader One sweetens up the Miniatures Outrider...
-- Posted by Tamer on Monday, September 14 2015
"I recently picked up the Outrider from the X-wing Miniatures game set. While it looks cool, I have no interest in playing this game but have found the ships to have some awesome detail. The only area lacking was the engine. As you can see, its black so it definitely looks bland. I took some ice blue paint from games workshop paints and touched it up, giving it some "engine glow" color. The Micro Machines and titanium versions of the Outrider have a light blue color on the engine, so seeing this not have any color seemed out of place. It's very minor, but it definitely makes it stand out a bit more I think."

I agree it looks a lot better with the blue!

HALCION is rocking TFA 6" Custom Line...
-- Posted by Tamer on Monday, September 14 2015
I don't think there is anything Brandon can't scratch build or just make outright. I can remember one of these characters being shown in an early clip.

Brandon just nailed him spot on from every angle.

HALCION is rocking TFA 6" Custom Line...
-- Posted by Tamer on Monday, September 14 2015
I don't think there is anything Brandon can't scratch build or just make outright. I can remember one of these characters being shown in an early clip.

Brandon just nailed him spot on from every angle.

Our Facebook Page is popping with great customs...
-- Posted by Tamer on Monday, September 14 2015
We are almost seeing more new customs on our Facebook Page than in our forums so I had to give our FB Page some shout outs this morning.

This is a great First Order Storm/Clone Trooper by Jason Todd Kimball.

Use Dorkside Toys and forget the crowd, lines, and get all your TFA Collectibles!
-- Posted by Tamer on Sunday, September 13 2015
Shop either their full Star Wars Section or go to their Episode 7 The Force Awakens Only Section to load up on all the great new Star Wars Goodness. Remember, we are in the middle of a TFA Custom Challenge and if the pegs are dry in your area their selection is still great!

From great deals on 6" figures to the 3.75" Line Up you know you can count on Dorkside Toys to handle your order professionally and timely with only momc actually packed.

Also, understand that they are breaking down some of the new exclusive sets where you can buy just the figures you want. You don't have to be forced to buy figures you already have to get the new ones! They also have up some great 6" The Force Awakens Pre-Orders like the TFA Wave 2 that includes Constable Zuvio, Poe Dameron, Captain Phasma, and the Guavian Enforcer. They are also selling and shipping for free the new 6" TFA TIE Fighter with Pilot.

Sjefke showcases a great update...
-- Posted by Tamer on Sunday, September 13 2015
"I finally have something to post.

I recently ordered two TBS Mosep Binneed figures (Good thing. Never saw bupkis at retail) with the idea to make three customs from the two. One I'm keeping clean (OK, with a few modifications) and the other I split the head and the body.

Tawss Khaa was the other Nimbinal in Mos Eisley Spaceport, but he was also known as the original Jabba the Hutt.

To keep from destroyed a good head, I molded and casted Mosep's head.

Finally, I wasn't satisfied with how limited the range of motion was on the 16 POA figure with rocker ankles, so I cut about a millimeter from the backs of his knees and elbows and split the uniform's skirt. I think I could get him to sit in a chair now."

He sure looks great to me. What a way to create that head too. And the new range of movement he was able to get is astounding!

I-am-Boba-Fett continues his Disney Princess Crossovers...
-- Posted by Tamer on Sunday, September 13 2015
"Here's a custom Star Wars Disney's ARIEL as a SITH figure.

Features:

- Hair sculpting done by me

- Custom made Sith Lightsaber

- Custom sculpted mid-section stomach area

- Soft goods details

- Fully poseable custom figure with lots of articulation"

My daughter is loving these figures in the realistic style too. Wow, she is spot on with the reference image he used to create her.

Its time for our annual Birthday Custom Challenge...
-- Posted by Tamer on Saturday, September 12 2015
You knew it was coming! Its time for our annual Birthday Bash! This time the theme was pretty simple to come up with: take one of those awful TFA Figures with the 5 points of articulation and show Hasbro what they should look like with full movement! You will have between now and November 9th to post your entry so get cracking!

Mandalore25 and Sjefke show us some cheap custom fodder...
-- Posted by Tamer on Saturday, September 12 2015
With the lack luster movement in regards to the new The Force Awakens Line, customizers have been on the prowl for ways to turn these figures into something worthwhile.

Leave it to the custom artists Sjefke and Mandalore25 to share some of their resources and links to finding cheap custom fodder to find ways to add some movement back into your action figures.

Like M25's eBay Auction for less than $2 a figure.

Ben Alius shows us his progress on his Wooden Freighter...
-- Posted by Tamer on Saturday, September 12 2015
"The first layer of paint is on the outside of the ship."

I really, really enjoy his wooden line up he has created to give his son some quality Star Wars Toys, but without the fantastic mark up at retail. He is creating quality items that his son absolutely enjoys.

Elias and Darth Daddy show us some great projects...
-- Posted by Tamer on Saturday, September 12 2015
"Elias has been hard at work creating some really cool displays for his shelves. His latest project was adding an "eight panel computer console" to an Imperial diorama that he has been working on. We bought the computer console from Hole In the Ground Productions and placed it in a Frank D'iorio Diorama Workshop inspired piece that we purchased second hand on eBay. We used glossy black adhesive vinyl contact paper on some spare foam board that we had to add the flooring to the walls and completed the look."

Talk about one great look. Sometimes it is not about being over complicated. I would love to have a shelf like that in my own collection!

Mr. Jedi 1977 shows us some OT Characters I didn't know existed...
-- Posted by Tamer on Saturday, September 12 2015
"Ok I am starting off with a custom that I don't think I have seen anybody create as of yet. This character is in the move just before luke and obi wan enter the cantina and can be seen for a split second. I will just call him the voidspider speeder pilot lol."

Looks great to me. Trust me, that is just a drop in the bucket of a very large update to see.

The Clonehead reviews the new Disney Die-Cast Flamethrower Trooper...
-- Posted by Tamer on Saturday, September 12 2015
"Got this bad boy in the mail yesterday.

Mostly die cast with some plastic, this Flametrooper is a hefty brute. Some extra lower extremity twist articulation would add to the poses available with the ball jointed hips but as heavy as this guy is, I don't know how many poses his heft would allow.

The included plastic base has a foot peg which helps.
The body and plastic head sport great detail, the body being screwed together with the back pack being metal as well.

That leaves my only real complaint being the bendy plastic used for the flame thrower which arrived already warped in the package.

He is a size larger than the black series 6 inch tfa trooper. I have attempted some forced perspective attempts with both as well as straight up side to side shots."

I am so tempted to delve into this line. So tempted. It seems about the only way to get articulation outside of the Black Series 6" Line now!

Big Padawan Customs creates a super arty Finn I would buy!
-- Posted by Tamer on Saturday, September 12 2015
"Made my own super-arty Finn using parts from Ponda Baba and Starkiller. Its not movie accurate, but I like him nonetheless. As always feel free to leave comments..."

I really like him too. I so would have bought this one had he been released instead of the stuff that is out there now!

Darth Crassus creates his first First Order Custom...
-- Posted by Tamer on Saturday, September 12 2015
"I got a pretty good haul on Force Friday. I decided to try a simple custom. I swapped Finn's head onto an extra Stormtrooper body. Fortunately, the peg fits the hole and voila a Finn in Stormtrooper armor custom. My first TFA custom!"

It also looks really good to me. We can only hope a few of these type figures will show up in the exclusive Black Series line. My fingers are crossed as figures like this I will buy!

Jedi Minstrel is back!
-- Posted by Tamer on Saturday, September 12 2015
"Well, it's been a loooong time since I last posted anything so here goes.

I don't have quite a backstory or even a name at this point but, this one is a remnant of the Clone Wars. A survivor, in fact."

Just a great combination of parts!

Ghost Skull 18 makes a Finn we would all love to own...
-- Posted by Tamer on Saturday, September 12 2015
"Finn trooper is made from 5POA 1st order trooper with added articulation from clone wars arf trooper an the lower half of a TVC clone trooper."

Now that is a great combination if you ask me. Seeing some of the poses he is able to get really slams it home how important articulation is in an action figure.

Mandalore25 is back with a new one already...
-- Posted by Tamer on Saturday, September 12 2015
"This is my Darth Bane. Sewed all the soft goods. Sculpt the collar, details on the shoulder pad, details on the hand, belt, and boots."

Wow, such a drastic change from the original figure he used as a based. I really enjoy good soft goods work too.

Mandalore25 gives us a new Mando...
-- Posted by Tamer on Friday, September 11 2015
"Here's my Cassus Fett. Dulled some gold paint, and sewed the soft goods myself. Not too big a fan of mixing paint, always mix too much, not enough, or it dries out before I finish. This time I mixed clear varnish in to keep it moist, and supplement it a bit. It worked great, and made the paint's finish a bit nicer."

Wow, the gold is so cool on this one. I love old school Mandalorians in the Crusader armor. Think I got that right.

UPDATE: This one is now listed on eBay if anyone would like to own him.

Mr. Black is back!
-- Posted by Tamer on Friday, September 11 2015
"Another long break, but now that summer's over I have picked up the pace again. First up is a custom action figure of a friend of mine. This idea just came up a while ago and once I started working on the figure, it came along just perfectly. She has three cats, for which I used Playmobil cats. I'm happy to say she was very pleasantly surprised by my gift."

What a great idea for a gift. It sure looks like Remco hasn't lost his touch thats for sure!

I-am-Boba-Fett gives us a crossover...
-- Posted by Tamer on Friday, September 11 2015
"Here is a custom Star Wars Disney's Mulan as a Jedi figure made in a realistic style not animated.
Features:
- All new exclusive head sculpt by me
- Custom paint work
- Resin cast torso
- Resin Cast belt midsection area
- Sculpted forearm sleeves"

Looks great to me. I bet this would look awesome with an animated Disney Head too.

Larifari gives us a new incarnation of Kylo Ren...
-- Posted by Tamer on Friday, September 11 2015
"Less uniform, thinner belt. thus it appears to be higher."

Guy knows how to take a pic to show of his work too. I really like all of the work he has shown us so far!

Jodo shares Chapter 4 of Era of Darkness...
-- Posted by Tamer on Friday, September 11 2015
"Writer's Note: A very special thanks goes out to Chewie for adding the perfect laser blast effect, and Matthew Horst for helping me with one frame I was having some trouble with! I appreciate the help guys!"

I like it! Customizers helping customizers in whatever form it might be. And by the way, this is one awesome read, full of action!

Wraithnine creates a SSC Custom Doom...
-- Posted by Tamer on Friday, September 11 2015
"Ok Shawn ...you win...

Clone Commander Doom 1/6 scale..."

Wow, I never knew winning could be so cool. Man this guy makes me want to collect SSC Clones! Please also take a look at W9's Sideshow Custom Clones Sale. He is creating the Troopers Sideshow hasn't gotten too in just epic scale.

Ron Hembling is back with an I.M.P.S. Custom Update...
-- Posted by Tamer on Friday, September 11 2015
"Here is the completed I.M.P.S trooper, I painted and weathered him using Vallejo and GW paints and pastel chalks.

The base is from the Bandai trooper with plasti card edging and the ground work was built up using putty. I used real rocks, grass and dirt to cover the base and the small shrubs are from Army Painter."

I.M.P.S. is my favorite fan created film. I loved the second series of this. Seeing that Walker Drop was just awe inspiring! Anyhow, Ron really captures that feeling well.

Big Bad Toy Store lists great new Star Wars Items!
-- Posted by Tamer on Thursday, September 10 2015
END OF SUMMER SALE!
Reduced Pricing on 3000+ Items! New Sales Menu Format with 16 Sub-Menus with Images - Check Out all the Deals Here:
http://www.bigbadtoystore.com/bbts/list.aspx?list=19585

STAR WARS EPISODE VII HASBRO LINEUP
Force Friday has arrived and you can browse the Hasbro lineup here including the 6” Black Series, Force FX Lightsabers, Vehicles, three new series of 3.75” figures, Hero Mashers, Micro Machines, Games, Play-Doh and more!
http://www.bigbadtoystore.com/bbts/search.aspx?search=hasbro%20episode%20vii

STAR WARS EPISODE VII HOT TOYS LINEUP
Kylo Ren is a dark warrior strong with the Force who gains his name from the Knights of Ren and also commands First Order missions. The First Order Stormtrooper and Heavy Gunner Stormtrooper are both armed with new armor, weapons and equipment to complete their missions. Each highly detailed figure comes with cool weapons and accessories as well as a specially designed hexagonal figure stand with the First Order’s emblem! Kylo Ren is $224.99; the Stormtrooper is $204.99, Heavy Gunner Stormtrooper is $219.99. Get a set of Stormtrooper and Heavy Gunner for $389.99.
http://www.bigbadtoystore.com/bbts/search.aspx?search=hot%201/6%20episode%20vii

STAR WARS EPISODE VII FUNKO LINEUP
The Force Awakens with the new Wacky Wobblers and Pop! figures based on characters from the upcoming 7th episode in the Star Wars saga. $9.99-$12.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=funko%20vii

STAR WARS EPISODE VII BLACK SERIES DELUXE TIE FIGHTER
The elite Starfighter pilots of the First Order have access to specialized craft, such as two-seater TIE craft outfitted with enhanced weapons and sensor systems. Pilots launch into combat aboard these advanced fighter craft, hunting down enemy vessels and protecting space around installations and warships. This massive First Order Special Forces TIE Fighter vehicle includes one First Order TIE Fighter Pilot Elite figure. $164.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=ZRTY10078&mode=retail

STAR WARS EPISODE VII FX LIGHTSABERS
Recreate the biggest battles and missions in Star Wars with these lightsabers from The Black Series! Force FX Lightsabers feature light and sound effects and metal hilts. Luke Skywalker, Yoda and Darth Vader are $139.99 each or in a case of 3 for $409.99. Also available is Kyle Ren’s lightsaber for $184.99
http://www.bigbadtoystore.com/bbts/search.aspx?search=hasbro%20episode%20vii%20fx

STAR WARS EPISODE VII BLACK SERIES
Re-create the biggest battles and missions in the Star Wars saga with these figures from The Black Series! With exquisite features and articulated movement, the figures in this series embody the quality and realism that Star Wars devotees love. These figures are crafted to display true-to-story detail and come with an accurately decorated accessory. Act out favorite battles or create brand new ones! No collection -- or adventure -- is complete without these figures. Build up an epic collection with all the figures and vehicles from The Black Series.
http://www.bigbadtoystore.com/bbts/search.aspx?search=hasbro%20vii%20black

STAR WARS EPISODE VII 3.75 INCH
Enter the world of Star Wars and launch into action and adventure! Discover exciting stories of good versus evil in a universe of heroes, villains, and aliens with the new 3.75 inch lineup including Star Wars Armor Figures, Desert Mission Figures, Jungle and Space Figures, Vehicles and 2-Packs.
http://www.bigbadtoystore.com/bbts/search.aspx?search=hasbro%20episode%20vii%203.75

RALPH MCQUARRIE STORMTROOPER STATUE
Ralph McQuarrie’s conceptual drawings and paintings were instrumental in bringing George Lucas’ epic space saga to the big screen, envisioning the vast worlds of fantastic heroes, villains, vehicles and aliens that would come to be known as Star Wars! Expertly crafted in 1:5th scale, the soldier of the Empire is depicted patrolling a corridor of the Death Star and comes with multiple display options – carrying a shield in one hand while wielding a lightsaber or blaster in the other - and is fitted with a distinctive helmet and armor that more closely resembled fighter pilot gear than the final costumes seen on screen. $399.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=SSC11369&mode=retail

JDeck finishes his Y-Wing Hangar...
-- Posted by Tamer on Thursday, September 10 2015
"I painted my figures for this Y-wing maintenance hanger display. I'm not Da Vinci when it comes to painting figures, more like an impressionist, lol, but in 1/72 you don't need much detail. The pilot is Jon "Dutch" Vander and his droid along with some mechanics. From my references the R2 is all grey so that's how I painted it. I like this display, since I was building WW2 models/dios I've been wanting to do some kind of maintenance hangar. So I think I'll make more hangar displays with some of the other Bandai vehicles."

With results like this I sure don't blame him!

Mandalore25 gives us some new Aliens...
-- Posted by Tamer on Thursday, September 10 2015
"Made a couple of green Nikto, one a jedi, and one a rebel pilot with an astro droid.

Both are listed if anybody is interested:

For the jedi

For the rebel pilot."

What can I say, we always need more aliens in our SW Verse! I like em.

Ghost Skull 18 arties up the new Finn...
-- Posted by Tamer on Thursday, September 10 2015
"Finn WIP an Kylo is finished, Finn is made using the legs of Indiana jones, torso from mutt , arms are from Yavin Luke and the rest is 5poa Finn. Kylo is made using the lower legs an cloth from darth sidious , the upper waist is from a hobbit figure, arms are from a dark Luke and the rest is 5poa Kylo."

It is so nice to see figures that actually can move. I believe thats why we call them action figures!

Sjefke is back with a fix for those pesky Astro-Mechs!
-- Posted by Tamer on Thursday, September 10 2015
"Hey Yarders. I wanted to share a quick fix for the R4-G9 astromech sculpt. To the irritation of many, on many of the figures utilizing this sculpture, the factory assembled the descending foot BACKWARDS, rendering the figure unable to rest its foot flat on the ground.

I just acquired Battle Damaged R2, and this flaw was really working on my OCD. The foot is cast in a hard plastic, so boil and Boil&pop won't work. contemplated cutting and reattaching the foot in the proper orientation, but the a more simple solution hit me. The foot swivels back and forth on a peg ( Duh! ), and the angle of the swivel is limited by the plastic blocks at the attachment site. By simply cutting a millimeter from the rear block, the foot can swivel enough to rest flat."

Well now, quick and easy I like it! You can see a ton of difference in how this one sits in the before and after pictures. Thanks Sjefke!

Dan finds Wave 1 of the Wal-Mart Arty Wave!
-- Posted by Tamer on Thursday, September 10 2015
Dummy me, I found em too on Tuesday night, but didn't snap any photos. I brought home the Vader and Chewbacca. I saw the Luke too. I am thinking the Ceremonial Leia should have been out too, but perhaps its only these three for now.

MAXX Replicas shows us his first light test...
-- Posted by Tamer on Thursday, September 10 2015
For his new The Force Awakens Diorama. He also lets us know that there is more to come soon. Wow, can you imagine this fully populated?

Imperialshipyards.net selects #ChooseDarkSide!
-- Posted by Tamer on Wednesday, September 9 2015
Yepper, probably a no brainer, but as Hasbro starts off a great new promotion we simply cannot wait to see what this selection brings. Stay tuned as you will find out more details as they emerge!

No AT-AT Driver were harmed during the filming of this event!

Bronxstalker gives us a great Force Friday reveal...
-- Posted by Tamer on Wednesday, September 9 2015
"When I heard that we were getting 5 PoA figures, I was bummed out, so I decided to make my own Kylo Ren. He uses a Marauder Task Force base figure, so not only does he have exceptional articulation, but he stands at a tad bit over 4".

I have to redo the belt as it came out rough, and I need to redo the lightsaber, as I didn't make it long enough, but you get the idea of what the finished figure is like.

The helmet is fully sculpted over a snake eyes head, and I even made sure to sculpt the back of the helmet as to what I've seen on the web (even though it remains hidden under the hood for the most part). At this scale, it wasn't easy doing the helmet, but I think it looks pretty decent.

Happy Force Friday."

He had this posted this past Friday, but I am so behind on my custom postings. Matter of fact he now has this one listed on eBay and hands down this is so much better than the regular Hasbro one you won't regret the purchase.

We welcome CoruscantiMoff to the customizing boards...
-- Posted by Tamer on Wednesday, September 9 2015
"This is a fuel tanker used by Imperial patrols in the Coruscant underworld. It is a junk pile of a craft only meant to transport fuel to hapless Imperial vehicles enforcing law in the Wild West of Coruscant. The Imperial vehicle is one of a kind made by patrol troopers for their personal use. It is made from old parts of ships and a standard fuel tank. It is slow, unsafe, and falling apart but it gets fuel to stranded Imperial walkers in the Underworld. Many vehicles of its kind is abandoned in the Underworld after attacks by criminal organizations seeking to steal the valuable cargo. These fuel tankers are practically defenseless, the only defense is the pilot's blaster."

Welcome to ISY! I like the simplicity of this one. Keep em coming!

Care to win a Vader Edition PS4?
-- Posted by Tamer on Wednesday, September 9 2015
"We are giving away as many as 20 Darth Vader PS4's, and a few custom made Darth Vader Samurai Statues. The Vader PS4 is hot right now, and the Vader Statue is an interesting visual, but besides that it would help us reach Star Wars fans who might be interested in the game and prizes...and that is what we want, to give away these prizes to Star Wars fans.

*If you pre-register for Star Wars Uprising on prelaunch.me you will receive the following in game items:

DL-44 Blaster, A Storm Trooper Helmet, and a Wookie Character Class

*Star Wars Uprising tells the cannon story of what happened after "The Return of the Jedi""

Sounds like a great way to start the day to me! Click here to go see how to enter.

Star Wars Insider and Topps Unite for Trading Card Promotion...
-- Posted by Tamer on Wednesday, September 9 2015
"As exclusively announced on starwars.com, Star Wars Insider and TOPPS team up to reveal the all-new TOPPS Star Wars Journey To The Force Awakens trading cards – including FOUR EXCLUSIVE cards to collect inside Star Wars Insider #160, on sale September 22nd!"

I like this magazine. I might have to renew my subscription using this offer!

I-am-Boba-Fett gives us a new Jedi...
-- Posted by Tamer on Tuesday, September 8 2015
"Made this awhile back but just now getting her pics posted here. This is a custom Star Wars Female Farghul Jedi Knight figure. She features a custom lightsaber, a sculpted mid-section, and custom paint work."

I think she looks great. The talent I see poster here daily just amazes me sometimes, like this morning!

Clonehead gets the parts itch...
-- Posted by Tamer on Tuesday, September 8 2015
"I have started to bring some parts back into production
Some of this and some of that. Working on getting the missiles listed again. Even got a female mando Parts auction I started at .99

Got some new parts to show including some force awakens stuff

Since 6 inch Finns head already pops onto a stormie body. It made since to get a hollow helmet together for him.

Of the new 3 3/4 heads, phasma had enough size to render hollow.

I took a Super articulated fun shot with TVC fordo wearing the Phasma bucket.
6 inch Kylos head and the hollow buckets should be ready to cast by tomorrow."

Click here to go see his parts store on eBay!

Ron Hembling is back with a Sullust Trooper...
-- Posted by Tamer on Tuesday, September 8 2015
"Finished painting the version 2 Sullust Trooper and here are a few quick pics. I will get my usual outdoor pics done tomorrow, I painted and weathered him using Vallejo, GW paints and chalk pastels."

All I know is that it looks fantastic.

MAXX Replicas working on his Episode 7 Falcon...
-- Posted by Tamer on Tuesday, September 8 2015
"Some of the parts are "scratch build" and some are RESIN recasts from SHAPEWAYS parts for the Hasbro Falcon which I've bought at the RPF Forum. So, here my EP VII radar dish for my beauty."

It is really looking great to me so far. A heck of a lot nicer than the nerf firing blaster version Hasbro is giving us. I wonder if MR is gonna fix that one up?

Star Wars PS4 looks fantastic!
-- Posted by Tamer on Tuesday, September 8 2015
11-17-15 can't come soon enough! Click here to see the latest prices for the Star Wars Darth Vader PS4 Bundle on the bay!

Use Dorkside Toys and forget the crowd, lines, and get all your TFA Collectibles!
-- Posted by Tamer on Sunday, September 6 2015
Shop either their full Star Wars Section or go to their Episode 7 The Force Awakens Only Section to load up on all the great new Star Wars Goodness.

From great deals on 6" figures to the 3.75" Line Up you know you can count on Dorkside Toys to handle your order professionally and timely. They simply do not ship unless its momc folks. I have used them time and time again and have not once been upset with any order. Tell em the Tamer sent ya!

Also, understand that they are breaking down some of the new exclusive sets where you can buy just the figures you want. You don't have to be forced to buy figures you already have to get the new ones!

Entertainment Earth also has an Exclusive Desert Assault Walker...
-- Posted by Tamer on Sunday, September 6 2015
"Entertainment Earth Exclusive! Crush the resistance in the desert with the Star Wars The Force Awakens Desert Assault Walker with First Order Stormtrooper Officer - Entertainment Earth Exclusive! This fantastic boxed set brings you a 3 3/4-inch scale action figure and a vehicle. Your army won't be complete until you add this awesome armored officer and his ride to your squadron!

The 7-inch tall Desert Assault Walker features an articulated chin gun, jointed hips, and moving ankles so you can pose it in a variety of fun and menacing ways. The brown vehicle sports red highlights and a unique deco you won't find anywhere else!

The 3 3/4-inch First Order Stormtrooper Officer is designed to stand perfectly atop his mighty mechanical monster. He boasts fully articulated shoulders, hips, and neck. His blaster is painted with black details and is specially designed to plug right in to his thigh, rather than deal with bulky and antiquated holsters. Size: 3 3/4 inch scale."

I know there are a ton of things out there today. I will no doubt miss a few of them. Ain't it great! Talk about Star Wars being back in full force! Not much pun intended there.

By the way don't forget to check out Entertainment Earth for the full range of Star Wars The Force Awakens Products. Beat the stores and know you will get everything you want from the comfort of your own home. EE has always shipped my stuff superbly too.

Amazon.com gets Exclusive 6-Inch Stormtrooper 4-Pack!
-- Posted by Tamer on Sunday, September 6 2015
"The Black Series brings exquisite features and articulated movement, which for every devotee of Star Wars means quality and realism. Take command with this Stormtrooper 4-Pack including Phase I Clone Trooper Commander, Phase II Clone Trooper, Imperial Stormtrooper, First Order Stromtrooper Officer. Picture new moments of adventure with 7 included accessories."

I edited the original description to get you what you needed! Go order yourself a set!

Entertainment Earth gets Exclusive 6" Imperial Four Pack...
-- Posted by Tamer on Sunday, September 6 2015
"Entertainment Earth Exclusive! Bring home an entire army in one box with this Star Wars The Black Series Imperial Forces 6-Inch Action Figures - Entertainment Earth Exclusive. The set brings you four 6-inch scale plastic action figures in the employ of the Galactic Empire - including one you've never seen before as a toy! Each features awesome weapons and amazing paint, so you really should pick up a few of them to serve Darth Vader and the Emperor on your toy shelves. The 4 figures include:

Sandtrooper Sergeant - The Black Series debut! Sandtrooper Sergeant includes a white pauldron, backpack, rifle, grenade launcher, and Stormtrooper blaster, plus his survival backpack. Measures 6-inches tall and sports 26 points of articulation.

Crimson Stormtrooper - World action figure debut! This red Stormtrooper has never before been seen as an action figure in any size, so here's your chance to get the very first one. With 26 points of articulation, he measures 6-inches tall and serves the will of the Emperor with a rifle and blaster.

Lieutenant Oxixo - The Black Series debut! As a TIE Fighter pilot, this 6-inch tall figure serves the Imperial forces on the Death Star above Endor. He has a uniquely painted helmet with a distinctive silver crest, distinguishing him from his fellow squad members in the Imperial Navy. Lieutenant Oxixo boasts 24 points of articulation and a working holster.

R2-Q5 - The Black Series debut! With spinning wheels, a rotating dome, and a retractable third leg, this black robot conceals all sorts of secrets under his bronze panels! He measures 3 1/4-inches tall and sports 6 points of articulation.

Size: 6-inch scale"

The six inch line is seeing some awesome stuff. Click here to make sure you get a set!

Did you see Amazon.com's exclusive TFA Troop Builder Pack?
-- Posted by Tamer on Sunday, September 6 2015
"Take command with this 7 figure Troop Builder Pack including Captain Phasma, First Order Stormtrooper, First Order Flametrooper, First Order Snowtrooper, First Order TIE Fighter Pilot, First Order Riot Control Stormtrooper, and First Order Heavy Artillery Stormtrooper. Picture new moments of adventure with more than a dozen accessories included. Collect and battle with these and other figures and vehicles from Star Wars. Each sold separately. Star Wars products are produced by Hasbro under license from Lucasfilm Ltd. Hasbro and all related terms are trademarks of Hasbro."

Be sure to get your order in before these sell out!

More TFA 3.75" 5 POA Figures revealed...
-- Posted by Tamer on Sunday, September 6 2015
Entertainment Earth has showcased a wave after the figures we have just seen released on Force Friday for The Force Awakens for the 3.75" Line Up.

"Tour the galaxy with the Star Wars The Force Awakens 3 3/4-Inch Jungle and Space Action Figures Wave 2 Case! Each 3 3/4-inch action figure includes a pair of accessories - or possibly even more - from a galaxy far, far away. Feel disturbances in the Force, and then shoot at them, with this exquisite collection of action figures. Most action figures feature 5 joints each. Ages 4 and up.

The Star Wars The Force Awakens 3 3/4-Inch Jungle and Space Action Figures Wave 2 Case features 12 individually packaged action figures, which may include:
PZ-4C0
Goss Toowers
Kylo Ren (winged pikes)
General Hux
Guavian Bodyguard
The Inquisitor (Season 1 Star Wars Rebels)
(subject to change)"

Click here to go get your order in!

Boxed images of the new 6" TFA TIE Fighter!
-- Posted by Tamer on Sunday, September 6 2015
Its gonna be huge! I just love the implications of a full size vehicle in the 6" Line up!

The Spectre shares news on a 6" Two Pack rumored to be coming to Target!
-- Posted by Tamer on Sunday, September 6 2015
Good ole Dan is keeping our Facebook Page updated a lot better than I am keeping this place updated. Click here to find out the full news!

Wal-Mart offering deals on Labor Day!
-- Posted by Tamer on Sunday, September 6 2015
As we all now know, Wally World is the only place that is gonna sell the fully articulated Black Series Line right now, so you might as well save some deniro! Click here to go see their entire new Star Wars Section of their site devoted to all things we love!

Its the last call for Gentle Giant Premier Guild Membership Orders...
-- Posted by Tamer on Sunday, September 6 2015
"If you have not yet purchased the 2015 Premier Guild Membership (valid from April 2015 through March 31st, 2016); you could be missing out on the PG gifts as well as the some great Premier Guild Exclusives."

Click here to go put in your order!

Sideshow offering Labor Day Discount on select items...
-- Posted by Tamer on Sunday, September 6 2015
Use the code "LABDAY15O9Q8A5HQ" at checkout this weekend and tomorrow and you can save $25! Click here to see the goods.

McRobo Creations shares word on a new eBay Aucton...
-- Posted by Tamer on Sunday, September 6 2015
"Rigid Plastic Playset for 3 3/4" Star Wars Figures

This is a solid-built piece of hard, rigid ABS plastic. Not cardboard and not foam board. Pieces are riveted together, and will not deteriorate over time. Expect a sturdy barge with years of playability that will withstand the test of time.

45 inches long
Movable sails
Fully assembled
Airbrushed paint job
4 simple doors"

Folks I haven't seen anything in this size for true 3 and 3/4" Action Figure Scales. It is immense and just gorgeous. Click here to add this to your collection.

We continue the epic Hot Toys Sixth Scale TFA Offerings...
-- Posted by Tamer on Sunday, September 6 2015
Here is round 2 of the wonderful offerings. First up is the First Order Stormtrooper (Squad Leader) Sixth Scale Figure:

"The highly-accurate collectible figure is specially crafted based on the image of the First Order Stormtrooper Squad Leader in Star Wars: The Force Awakens. This collectible figure features the brand new design First Order Stormtrooper armor and helmet, the white pauldron that indicated the rank of squad leader, a highly detailed blaster, and a specially designed hexagonal figure stand with the First Order's emblem!"

Next up is the First Order Heavy Gunner Sixth Scale Stormtrooper:

"The highly-accurate collectible figure is specially crafted based on the image of the First Order Stormtrooper in Star Wars: The Force Awakens and features the newly designed Stormtrooper armor and helmet, a highly detailed and articulated megablaster, a blaster pistol, and a specially designed hexagonal figure stand with the First Order’s emblem!"

And we end today's spotlight with the Hot Toys First Order Sixth Scale Stormtrooper:

"The highly-accurate collectible figure is specially crafted based on the image of the First Order Stormtrooper in Star Wars: The Force Awakens and features the brand new designed Stormtrooper armor and helmet, a highly detailed blaster rifle and pistol, and a specially designed hexagonal figure stand with the First Order’s emblem!"

They are also hinting at additional offerings too so stay tuned!

Sideshow awakens some great TFA Products...
-- Posted by Tamer on Sunday, September 6 2015
It was high time we showcased some other licensees besides Hasbro and first out of the gate is the great Hot Toys Kylo Ren Sixth Scale Figure:

"The highly-accurate collectible figure is specially crafted based on the image of Kylo Ren in Star Wars: The Force Awakens. This collectible figure features Kylo Ren's helmet with weathering effects, a meticulously crafted outfit with layers, the character's signature crossguard lightsaber with LED light-up function and weathering effects, and a specially designed hexagonal figure stand with the First Order's emblem!"

We would also be remiss if we didn't feature the Hot Toys First Order Stormtrooper Sixth Scale Figure Set:

"The highly-accurate collectible figures are specially crafted based on the image of the First Order Stormtroopers in Star Wars: The Force Awakens. Each Stormtrooper features a newly designed Stormtrooper armor and helmet. The standard First Order Stormtrooper will be equipped with a blaster rifle and blaster pistol, while the First Order Heavy Gunner Stormtrooper will be armed with an articulated megablaster and a blaster pistol. Two specially designed hexagonal figure stands with the First Order’s emblem are also included in the set!"

And there are three more great TFA Hot Toys Offerings we are gonna feature this morning too.

Toys R Us having buy 1 get one 40% Off Select 3.75" Packs...
-- Posted by Tamer on Sunday, September 6 2015
Labor Day is already showing some great percents off. No doubt I am missing some, but good shopping out there folks.

Hasbro Toy Shop offering free shipping today too...
-- Posted by Tamer on Friday, September 4 2015
I kinda figured this might happen. I am telling you one thing it is sure nice for those of us who live in very rural areas that now won't have to face long drives and even longer lines!

Click here for the fully revamped Toy Shop Site, just in time for Force Friday!

WALMART IS ANNOUNCED AS THE NEW EXCLUSIVE U.S. HOME OF HASBRO’S STARWARS: THE BLACK SERIES 3 3/4-INCH FIGURES...
-- Posted by Tamer on Friday, September 4 2015
Some of the press release,

"The Collector-Favorite Line Will Feature Figures From the Saga Films and STAR WARS: THE FORCE AWAKENS, Beginning on September 4

BENTONVILLE, AR, Sep. 4, 2015 – Walmart and Hasbro, Inc. (NASDAQ: HAS) announced today that the retail giant will be the exclusive home of the fan-favorite STAR WARS: THE BLACK SERIES 3 3/4-inch toy line in the U.S.

Starting on “Force Friday,” September 4, Walmart.com will begin selling the first wave and taking pre-orders on the second wave of the highly collectible toy line. Customers will find the product in stores beginning in October, making Walmart the only destination in the U.S. for fans looking for highly detailed, highly articulated 3 3/4-inch figures based on the upcoming film STAR WARS: THE FORCE AWAKENS.

First launched in 2013, STAR WARS: THE BLACK SERIES 3 3/4-inch line quickly became a fan-favorite line, in the tradition of earlier Hasbro toy lines like the STAR WARS VINTAGE collection. As the new exclusive US home to the STAR WARS: THE BLACK SERIES 3 3/4-inch line, Walmart is proud to become the go-to destination for STAR WARS fans looking for the finest Hasbro toys available.

“Walmart is very excited to be the exclusive home of the Star Wars Black Series 3 ¾ inch figures,” said Anne Marie Kehoe, vice president of toys at Walmart. “This is just the beginning - fans, customers and collectors can expect Walmart and Walmart.com to be the place to find the newest characters and figures as they are released.”

“We’re thrilled that Walmart will be the new home for fans’ beloved STAR WARS: THE BLACK SERIES 3 3/4-inch toy line,” said Maureen Smith, senior vice president of brand marketing for Hasbro. “With the support of a world-class retailer like Walmart, we can ensure that collectors continue to get new, highly detailed and articulated 3 3/4-inch STAR WARS action figures for years to come.”

The first wave of the new STAR WARS: THE BLACK SERIES 3 3/4-inch line is currently available for purchase on Walmart.com and features EPISODE VI DARTH VADER, EPISODE VI LUKE SKYWALKER, and EPISODE IV CHEWBACCA. The second wave, featuring a brand new EPISODE IV PRINCESS LEIA figure and the first two figures based on STAR WARS: THE FORCE AWAKENS (FIRST ORDER STORMTROOPER and KYLO REN), are available to pre-order now on Walmart.com. Both waves will be available in stores in the next few months. Additional 3 ¾-inch figures will be coming later in 2015."

That sure works for me! I am breathing a big ole sigh of relief that the 3 and 3/4 line is still going to be able to use the term "action" for their action figures.

Anovos offers First Order Stormtrooper helmet...
-- Posted by Tamer on Friday, September 4 2015
"Offered for the first time ever is the Standard Line version of the STAR WARS™: THE FORCE AWAKENS First Order Stormtrooper Helmet Accessory.

This 1:1 scale costume accessory consists of the following features and is only offered as a completed helmet at this time:

Lightweight injection-molded plastic construction.
Derived from digital files used in the production of STAR WARS™ EPISODE VII: THE FORCE AWAKENS.
Assembled and finished helmet that's ready to wear out of the box.
Adjustable helmet suspension system to accommodate most head sizes."

Click here for the full details.

Entertainment Earth also has an Exclusive Desert Assault Walker...
-- Posted by Tamer on Friday, September 4 2015
"Entertainment Earth Exclusive! Crush the resistance in the desert with the Star Wars The Force Awakens Desert Assault Walker with First Order Stormtrooper Officer - Entertainment Earth Exclusive! This fantastic boxed set brings you a 3 3/4-inch scale action figure and a vehicle. Your army won't be complete until you add this awesome armored officer and his ride to your squadron!

The 7-inch tall Desert Assault Walker features an articulated chin gun, jointed hips, and moving ankles so you can pose it in a variety of fun and menacing ways. The brown vehicle sports red highlights and a unique deco you won't find anywhere else!

The 3 3/4-inch First Order Stormtrooper Officer is designed to stand perfectly atop his mighty mechanical monster. He boasts fully articulated shoulders, hips, and neck. His blaster is painted with black details and is specially designed to plug right in to his thigh, rather than deal with bulky and antiquated holsters. Size: 3 3/4 inch scale."

I know there are a ton of things out there today. I will no doubt miss a few of them. Ain't it great! Talk about Star Wars being back in full force! Not much pun intended there.

By the way don't forget to check out Entertainment Earth for the full range of Star Wars The Force Awakens Products. Beat the stores and know you will get everything you want from the comfort of your own home. EE has always shipped my stuff superbly too.

Disneystore.com celebrating Force Friday with free shipping...
-- Posted by Tamer on Friday, September 4 2015
Use the code "FORCE" at checkout and get the discount. Select stores are also having special in-store only events. I sure wish I had one close. Don't forget Disney has those Exclusive 6 and 1/2" Die-cast figures and Vehicles that look fantastic. Click here to go see it all!

The worry is over!
-- Posted by Tamer on Friday, September 4 2015
Hot off the press that perhaps Toys R Us is getting some clamshell vintage figures we now receive full image confirmation that super articulation is indeed still around in the 3 and 3/4" Line Up.

The figures you see above will be exclusive to Wal-Mart. I am wondering if this store exclusive will be a trend in the future.

Whew!!! Glad to see all this rumored end of articulation was nothing more than that!

Entertainment Earth gets Exclusive 6" Imperial Four Pack...
-- Posted by Tamer on Friday, September 4 2015
"Entertainment Earth Exclusive! Bring home an entire army in one box with this Star Wars The Black Series Imperial Forces 6-Inch Action Figures - Entertainment Earth Exclusive. The set brings you four 6-inch scale plastic action figures in the employ of the Galactic Empire - including one you've never seen before as a toy! Each features awesome weapons and amazing paint, so you really should pick up a few of them to serve Darth Vader and the Emperor on your toy shelves. The 4 figures include:

Sandtrooper Sergeant - The Black Series debut! Sandtrooper Sergeant includes a white pauldron, backpack, rifle, grenade launcher, and Stormtrooper blaster, plus his survival backpack. Measures 6-inches tall and sports 26 points of articulation.

Crimson Stormtrooper - World action figure debut! This red Stormtrooper has never before been seen as an action figure in any size, so here's your chance to get the very first one. With 26 points of articulation, he measures 6-inches tall and serves the will of the Emperor with a rifle and blaster.

Lieutenant Oxixo - The Black Series debut! As a TIE Fighter pilot, this 6-inch tall figure serves the Imperial forces on the Death Star above Endor. He has a uniquely painted helmet with a distinctive silver crest, distinguishing him from his fellow squad members in the Imperial Navy. Lieutenant Oxixo boasts 24 points of articulation and a working holster.

R2-Q5 - The Black Series debut! With spinning wheels, a rotating dome, and a retractable third leg, this black robot conceals all sorts of secrets under his bronze panels! He measures 3 1/4-inches tall and sports 6 points of articulation.

Size: 6-inch scale"

The six inch line is seeing some awesome stuff. Click here to make sure you get a set!

Amazon.com gets Exclusive 6-Inch Stormtrooper 4-Pack!
-- Posted by Tamer on Friday, September 4 2015
"The Black Series brings exquisite features and articulated movement, which for every devotee of Star Wars means quality and realism. Take command with this Stormtrooper 4-Pack including Phase I Clone Trooper Commander, Phase II Clone Trooper, Imperial Stormtrooper, First Order Stromtrooper Officer. Picture new moments of adventure with 7 included accessories."

I edited the original description to get you what you needed! Go order yourself a set!

Hasbro releases full details of Force Friday and latest SW Offerings!
-- Posted by Tamer on Friday, September 4 2015
Well we didn't actually get it all leaked, here are the particulars if you are back from your midnight spree:

"It's finally here — Happy Force Friday!

Hasbro's innovative and expansive toy line for STAR WARS: THE FORCE AWAKENS goes on sale today at retailers around the world and online. Some of them are even open right now for midnight madness!

We're thrilled to be able to share with you Hasbro's full line-up of action figures, vehicles, role-play items and more for Force Friday, featuring new characters such as REY, FINN, KYLO REN, POE DAMERON and CAPTAIN PHASMA alongside beloved characters from the classic films and STAR WARS REBELS.

We also wanted to share some notes about the exclusives that some of our great retail partners have on this Force Friday and beyond! In alphabetical order...

• AMAZON: Pre-order the STAR WARS: THE BLACK SERIES TROOPER EVOLUTION 4-PACK, featuring four 6-inch figures not available anywhere else, including the long-awaited PHASE II CLONE TROOPER and a FIRST ORDER STORMTROOPER with exclusive red pauldron!

• COSTCO: The STAR WARS HERO MASHERS ULTIMATE BOUNTY MULTI-PACK features five 6-inch customizable action figures (including DARTH VADER, HAN SOLO and BOBA FETT), plus extra gear and accessories.

• ENTERTAINMENT EARTH: Pre-order STAR WARS: THE BLACK SERIES 6-INCH FIGURE 4-PACK from entertainmentearth.com, featuring four exclusive 6-inch STAR WARS: THE BLACK SERIES figures, including a MAGMA STORMTROOPER and R2-Q5 DEATH STAR ASTROMECH DROID.

• KMART: STAR WARS: THE FORCE AWAKENS villain KYLO REN comes with an exclusive "snow" deco and a snow base in the STAR WARS: THE BLACK SERIES 6-inch exclusive, available for pre-order. The base will connect with a future exclusive in this series…

• KOHL'S: The STAR WARS: THE FORCE AWAKENS KYLO REN MASK WITH CONNECT AND CUSTOMIZE LIGHTSABER SET at Kohl's comes with a KYLO REN MASK and KYLO REN EXTEND LIGHTSABER, featuring a BLADEBUILDERS connector and a LIGHT DAGGER.

• SAM'S CLUB: The CHEWBACCA ROLE-PLAY MULTI-PACK contains both the NERF CHEWBACCA BOWCASTER, which features exclusive deco and exclusive FIRST ORDER targets, and the CHEWBACCA ELECTRONIC MASK.

• TARGET: Everyone's favorite new Droid from STAR WARS: THE FORCE AWAKENS is coming to Target! A limited number of REMOTE CONTROL BB-8 toys will be available exclusively in Target stores on Force Friday, with more stock to come throughout the fall season!

• TOYS "R" US: Toys "R" Us is your exclusive destination to pre-order the STAR WARS: THE BLACK SERIES 6-inch FIRST ORDER SNOWTROOPER OFFICER action figure – this character won't be available anywhere else! Build up your troops with this officer, which comes with a blaster and an exclusive red pauldron. Available for pre-order by 9/6.

• WALGREENS: Fans can capture the climactic battle from STAR WARS: RETURN OF THE JEDI with this exclusive STAR WARS: THE BLACK SERIES 6-INCH DARTH VADER (EMPEROR'S WRATH) figure, featuring an exclusive translucent mask with a visible skull underneath it, as well as an exclusive removable hand.

• WALMART: This fall, Walmart is the home for STAR WARS collectors and the exclusive home of the fan-favorite STAR WARS: THE BLACK SERIES 3.75-inch action figure line. A limited number of the first wave of the new line will be available in Walmart stores, and the second wave, featuring brand-new figures from STAR WARS: THE FORCE AWAKENS and a brand-new PRINCESS LEIA figure, will be available for online pre-order!"

The great news is that we are going to see at least one wave of fully articulated (mostly) figures that will be exclusive to Wal-Mart. More on that in a bit. We are also sorting all the great new images (hit the link for the graphic above to go see for yourself) and will get galleries loaded and populated.

Our friends at JTA share vintage news...
-- Posted by Tamer on Friday, September 4 2015
"TRU will carry Vintage-styled clam shelled figures as an exclusive in the near future."

Now if that isn't a reason to smile today I don't know what is!

Big Bad Toy Store lists great new Star Wars Items!
-- Posted by Tamer on Thursday, September 3 2015
END OF SUMMER SALE
Pricing has just been reduced on over 3000 items! We've added 16 different sale menus with 80 to 150 deals on each list! Menus include: Transformers, Marvel, DC, Bandai, 1/6 Scale, Statues, Mattel, Hasbro, Star Wars & More! There are a ton of great deals here, take a look through the many menus and grab them before they sell out!
http://www.bigbadtoystore.com/bbts/list.aspx?list=19585

EPISODE VII PRODUCT LAUNCHES FRIDAY SEPTEMBER 4TH AT 12:01 AM EASTERN STANDARD TIME – THE COUNTDOWN BEGINS NOW!
http://www.bigbadtoystore.com/bbts/search.aspx?search=hasbro%20episode%20vii

STAR WARS RESIN STATUES
Attakus presents nine all new Star Wars 1/10 scale resin statues. Each limited edition statue is highly detailed and hand painted with prices ranging from $49.99 to $159.99.
http://www.bigbadtoystore.com/bbts/search.aspx?search=ATTAKUS%20STAR%20WARS

STAR WARS BOILED EGG SHAPERS
Kotobukiya's lineup of Star Wars themed kitchen goods expands with boiled egg shaper kits! Quickly and easily shape a hard-boiled egg to look like C-3PO, R2-D2, Stormtrooper, or Darth Vader! Great for adding a Star Wars twist to your lunches! Fun, safe, and easy to use! Use along with Kotobukiya's sandwich shapers and lightsaber chopsticks for a full Star Wars themed meal!
http://www.bigbadtoystore.com/bbts/search.aspx?search=egg%20shaper

POP! STAR WARS VAULTED CLONE TROOPER
Funko has taken Clone Trooper out of The Vault! This member of the clone army is ready for battle! As with all of the Pop! figures from The Vault, Clone Trooper comes in updated packaging! $9.99
http://www.bigbadtoystore.com/bbts/product.aspx?product=FNK12662&mode=retail

Sjefke shares word on some 5 POA Fixes!
-- Posted by Tamer on Thursday, September 3 2015
He has scoured eBay and found some great links to some revoltech joints that you can used the spice up the movement in your TFA Action Figures.

"Hey Yarders, I was surfing through eBay when I noticed sellers vmaont and happy2u88 . They're selling lots of loose joints of various colors. The price doesn't seem unreasonable. I can see a use for these when super-articulating 5POAs, repairing a broken joint or scratch building."

Sounds like a great idea to me. Just one of the links he sent alone shows great promise to me!

JDeck continues his Y-Wing Hangar build...
-- Posted by Tamer on Thursday, September 3 2015
"I've been working on my Y-wing base. Since I can't replicate the exact props from ANH I'm going with a Rogue one inspired look, based on the photos that have been released. I'll add darker washes to the base and build more props and of course paint the figures. Once I get the lights hooked up it'll be pretty cool."

Talk about one great looking ship now in a great looking hangar. After seeing all the Hasbro Stuff man a person could think about just switching to Bandai!

More rumors of Super Articulated Figures...
-- Posted by Tamer on Thursday, September 3 2015
We can only hope all these rumblings of figures that are actually action figures, not statues will actually surface. Supposedly these won't be ready in time for Force Friday (pretty slick Hasbro), but will be in the coming weeks.

The new TFA TIE Fighter gets unboxed...
-- Posted by Tamer on Thursday, September 3 2015
We have a gallery of the new TIE too. Seems like it fares a bit better. Stress on the word a bit.

Unboxed pictures of the new Black TFA X-Wing...
-- Posted by Tamer on Thursday, September 3 2015
Well I will post it like this. Just click into the FB Image Gallery (thanks Dan) and see what you think. I won't try to sway you with my comments yet.

Ron Hembling is back with an Astro...
-- Posted by Tamer on Thursday, September 3 2015
"Well finally up and about using crutches, I can't carry anything for my usual outdoor pics so indoor ones will have to do until I get rid of the crutches and I can walk on my own.

Here is my repainted R5-D4 which I repainted into a Imperial Astromech R6-H8, he was painted using Tamiya matt black spray paint and then I used GW paints for the rest and weathered him using pastels. I also gave him some chips on the silver areas by lightly chipping the paint away using a model knife."

It is good to see him back and man that R6 looks fantastic.

Ben Alius shows more progress on his SW Freighter...
-- Posted by Tamer on Thursday, September 3 2015
"Yesterday the progress was big. I've finished building the biggest part on the top outside and on the inside. The belly of the freighter is still flat. I don't like that so the next few days I will spent thinking on how to solve that."

It sure looks great to me. Perhaps adding some thicker hull plating on the bottom or more guns? More guns is always better. Talk about one SWesque Freighter though!

Have you seen Most Wanted Collectible's Star Wars Section?
-- Posted by Tamer on Wednesday, September 2 2015
If not you are missing out on over 230 products, many of which are at deep discounts that you will not be able to find anywhere else. From Gentle Giant to Acme Archives, etc. you can count on Most Wanted Collectibles to list the high end items you demand for your collection.

Rest assured your order will be handled promptly and professionally and show up to your door in awesome shape. Personally I have never had an issue with any order. I have even been contacted by MWC's Customer Service just to make sure some items I ordered showed up ok. I liked that a good bit!

TFA X-Wing and TIE Fighter found in Australia!
-- Posted by Tamer on Wednesday, September 2 2015
They look pretty decent to me. Looks like 5 POA on the pilots with removable helmets, but something new to look for on Friday. Thanks to the Spectre for the update!

Official Force Friday Image revealed...
-- Posted by Tamer on Wednesday, September 2 2015
Dan shared this on our FB Page. I like it, kinda wondering why they didn't feature it more prominently with only a few more days to go, but hey they don't pay me the big bucks to think do they?

McRobo Creations shares a one of a kind eBay Auction...
-- Posted by Tamer on Wednesday, September 2 2015
"Rigid Plastic Playset for 3 3/4" Star Wars Figures

This is a solid-built piece of hard, rigid ABS plastic. Not cardboard and not foam board. Pieces are riveted together, and will not deteriorate over time. Expect a sturdy barge with years of playability that will withstand the test of time.

45 inches long
Movable sails
Fully assembled
Airbrushed paint job
4 simple doors"

Folks I haven't seen anything in this size for true 3 and 3/4" Action Figure Scales. It is immense and just gorgeous. Click here to add this to your collection.

Need a good list for all the Force Friday Collectibles?
-- Posted by Tamer on Wednesday, September 2 2015
Our friends at SW Action News have created a pretty cool list. Click through to our Facebook Page for the link.

" border="0">

Bronxstalker tries super sculpey...
-- Posted by Tamer on Wednesday, September 2 2015
"Over the weekend, I decided to order some super sculpey to try my hand in the sculpting busts department. I heard some good things about super sculpey, especially in that it feels and looks almost skin like.

After a little while with it yesterday....I gotta say, I really like it. Too bad it needs to be baked, because I would have loved to use this on figures. Oh well. Here's what I slapped together fairly quick. Basic out of this world head and some texture work to make it look even more like skin."

It sure looks like it could make some superior head sculpts!

Argos sends word about Force Friday Event...
-- Posted by Tamer on Wednesday, September 2 2015
"Hi Imperial Shipyards team,

With just a few days to go until Force Friday arrives and the brand new toys from Star Wars: Episode VII – The Force Awakens film land on shelves, we would like to invite you to an exclusive preview of an exhibition that looks back over the last four decades of Star Wars toys.

Held at the Argos Tottenham Court Road digital store in London, the exhibition will open its doors on Friday 4th September at 8am so fans can take a trip back in time and come face-to-face with some of the most iconic toys spanning Episodes I-VII.

Toy replicas of the AT-AT Walker from 1982 through to more modern additions like the Lego Star Wars X-Wing Starfighter, along with character figurines dating back to the late 1970s will be on display alongside the newly launched toys that are set to take the galaxy by storm this Christmas!

Toys from the brand new range including new Lego lines will also be available to buy in-store on the day.

The exhibition will run for one week, so if you can’t make the exclusive preview do not fear you have until Thursday 10th September to view the exhibition.

If you are one of the first five to enter the preview on the morning of 4th September dressed as your favorite Star Wars character, you will be in with a chance of winning a selection of the brand new toys to add to your collection!"

Sounds like a fun time to me. If I were across the pond I would sure attend.

Mandalore25 is back with a wip...
-- Posted by Tamer on Tuesday, September 1 2015
"Here's another WIP pic of Bo-Katan, I'm extremely happy with it, so I thought I'd share."

I like it. The articulation looks like it is gonna be off the charts good.

The revolution has begun...
-- Posted by Tamer on Tuesday, September 1 2015
Good ole Commander Kurgan has had all he can take with the five points of articulation figures. He has started a FB Page where folks can join and share resources about how to fix this growing problem we are seeing in our hobby.

Sideshow Collectibles gives you a chance to win this Thursday!
-- Posted by Tamer on Tuesday, September 1 2015
I think the graphic above pretty much sums up what you need to do. Click here to see Sideshow's Twitter Feed.