Author Topic: Clonehead's resin parts for sale list  (Read 229309 times)

Offline Clonehead

  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #210 on: March 06, 2010, 08:50:31 AM »
Good deal, Allen. You are quite welcome.  I have started to specifically include that part as a freebie when ever I move one of those modified helmet sets. I plan to take new pics and include that one with that auction but haven't gotten around to it yet.

I have a large list of parts for sale here, also, if you haven't seen it yet. There are parts there that I don't have listed on ebay.

I started a feedback thread for you here, by the way.

Offline Clonehead

  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #211 on: March 07, 2010, 03:57:13 PM »
Got some shots of a couple of orders that I wrapped up, today.

The first two shots are of an ebay customer's order of the modified helmets set, heads and helmets #8, and 7 free parts in the foreground.

The last two shots are of three parts that are going into JD's modified order. "yes, I threw in another free one"

Offline night force cynic

  • Captain
  • *
  • Posts: 661
  • Feedback: +1/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #212 on: March 07, 2010, 04:42:40 PM »
Clint, you ROCK!   I'll let you know as soon as I get them. 

Offline night force cynic

  • Captain
  • *
  • Posts: 661
  • Feedback: +1/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #213 on: March 11, 2010, 05:38:23 PM »
The casts are here!!    The casts are here!!    The casts are here!! 



Offline Clonehead

  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #214 on: March 20, 2010, 03:16:53 PM »
LOL, I am glad you are happy with them, JD.

Here are some shots of a couple of ebay orders that I was working on, this morning.

the first two shots show 4 EE mando helmets with seperate rangefinders, an apartment Fett slip-on armor piece, and I threw in the two shoulder pad pieces for free.

the second two shots show the modified helmet set with the RC/tie pilot mix and the sandtrooper ammo pouch as the freebies.

Offline IMPURGE

  • Lieutenant
  • *
  • Posts: 114
  • Feedback: +0/-0
Re: Clonehead's resin parts for sale list
« Reply #215 on: March 31, 2010, 11:12:15 AM »
Impurge, due to the necessity of such a part to be flexible, I haven't done much more than consider a belt and holster combo like you suggested. I do have the holsters and ammo pouches and feel that crafting the rest of the belt assembly using paper or styrene strips would be possible. Another option would be to take a kama with the belt and holsters from a clone commander figure, and cut the kama away from the belt and holsters to leave a piece alot like the one that came with the Geligrub trooper.
I have done this twice before on a couple of clones in my custom figure thread with some success.
  The ammo pouches sound interesting. Send me a PM about it.

hey Clint sorry about delay, I suck at figuring out electronic stuff, but sent you over the pics let me know if you need better/closer.  still messing with the Mascro setting on camera.

Offline Cimter

  • Cultural Minister
  • Brigadier
  • *
  • Posts: 1030
  • Feedback: +7/-0
  • Gender: Male
  • "Hey, it's me"
Re: Clonehead's resin parts for sale list
« Reply #216 on: April 02, 2010, 06:52:56 AM »
Clonehead quick question how easy would it be to make this head/helmet, and if you can do it let me know a price.
« Last Edit: April 02, 2010, 06:57:15 AM by Cimter »

Offline Clonehead

  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #217 on: April 03, 2010, 02:15:02 PM »
Clonehead quick question how easy would it be to make this head/helmet, and if you can do it let me know a price.
Probably not easy at all,Cimter. I can see what would make a good starting point in a rebel pilot's helmet but the lower part including the facia would probably have to be fabricated and would take some time but still be possible.
  I like that shot. Where did it come from?

I have added these parts to the list of parts for sale on page 1 of this thread.

CW snow ops rex head and separate helmet "helmet has a socket to fit the neck nub of a removable helmet CW clone figure" "counts as two"
CW snow ops rex shoulder pads 2 parts counts as 1
CW snow ops rex backpack with separate antenniea
Rham Kota chest armor "counts as 1"
ATRT driver chest armor "counts as 1"
Deluxe AOTS Fett front chest armor "counts as 1"

I believe that brings me up to 102 different available parts, now. Yippee, I broke 100!

Offline Commander_Kurgan

  • Brigadier
  • *
  • Posts: 1156
  • Feedback: +8/-0
  • Gender: Male
    • Kurgan's Star Wars Customs
Re: Clonehead's resin parts for sale list
« Reply #218 on: April 03, 2010, 04:14:45 PM »
Hi!
Would the faceplate of a Matt Trakker helmet work?

http://www.m-a-s-k.de/images/MattSpecialist.jpg

If you need one, I've got one I could provide.
Kurgan's Showcase: http://kurganscustoms.blogspot.com

People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf

Offline Cimter

  • Cultural Minister
  • Brigadier
  • *
  • Posts: 1030
  • Feedback: +7/-0
  • Gender: Male
  • "Hey, it's me"
Re: Clonehead's resin parts for sale list
« Reply #219 on: April 03, 2010, 04:28:24 PM »
Kurgan that would work for me if Clint could cast it, as for where I got the picture Clint it's from the WEG source books, I do believe the Imperial Sourcebook.

Offline Clonehead

  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #220 on: April 03, 2010, 08:49:25 PM »
Not an exact match but it sure does look cool to me. Sure, Ill mold and cast it.

Offline dana.raye.smith

  • Commodore
  • *
  • Posts: 830
  • Feedback: +5/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #221 on: April 03, 2010, 09:44:04 PM »
The helmet looks a bit like the Luke starfighter helmet from the Luke and Mara Jade comic pack... a little anyways...

Offline Clonehead

  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: Clonehead's resin parts for sale list
« Reply #222 on: April 04, 2010, 04:42:54 AM »
I was thinking the same thing which is a funny coincidence as I have a mold for that very helmet. It is a little smaller than some of the other pilot helmets though. Perhaps I will try to work on one of those today.

Offline Commander_Kurgan

  • Brigadier
  • *
  • Posts: 1156
  • Feedback: +8/-0
  • Gender: Male
    • Kurgan's Star Wars Customs
Re: Clonehead's resin parts for sale list
« Reply #223 on: April 04, 2010, 07:24:05 AM »
Clint, PM me your home address so I can send you the Trakker helmet face plate.
Anything else I shall throw into the envelope as master pieces?
I've got a 3 3/4" HALO Spartan helmet and some other goodies I could send along.
Kurgan's Showcase: http://kurganscustoms.blogspot.com

People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf

Offline Cimter

  • Cultural Minister
  • Brigadier
  • *
  • Posts: 1030
  • Feedback: +7/-0
  • Gender: Male
  • "Hey, it's me"
Re: Clonehead's resin parts for sale list
« Reply #224 on: April 04, 2010, 08:02:39 AM »
Hopefully Clint will say yes to the 3 3/4 Halo Helm as well, that could be useful, and Clint I think I may have some Heads you can cast, it will build up your inventory if nothing else, I just need to ball joint them and then I can send them, they are Alien heads - let me know if your interested.