Author Topic: Hemble's other Custom's - Indiana Jones - Pharaohs Tomb 1:12 P197 23/01/2024  (Read 516652 times)

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" WIP P54 16/04/14
« Reply #810 on: April 17, 2014, 09:25:07 PM »
Hi All,
 
I decided to make another 6" diorama but this time add some lighting to it and a eygptian style tomb was the way to go. Once the base was done it was painted and weathered using Vallejo and GW paints and pastel chalks.

RECIPE

1: Indiana Jones - The figure is from an earlier Figma Indy which I repainted, I'm waiting on another one to arrive so I can add him to the base.

2: Base - The base was made from a left over pieces of foam core. Once I got the desired look I used a led pencil and softly drew out the wall mural and once I was happy with that I used a very sharp led pencil and went over the original drawing. I then used my fingers and a pair of tweezers to remove some pieces of foam to simulate corrosion.
 
The sand is just fine washed river sand and was added once the base was painted and once the sand dried I gave it a wash over different colours of sand. The torches were made from home decorative sticks cut to size then bound togther using model boat ship rope and superglue and the flames were made by using Woodland scenics Water Effects.

The light from the flame is some fake candle light I picked up from the $2 shop and attached them underneath the base with a hole so that the bulb could protrude thru and sit inside the flame.

Ron
« Last Edit: May 24, 2014, 09:39:00 PM by hemble »

Offline Sjefke

  • Commodore
  • *
  • Posts: 915
  • Feedback: +0/-0
  • Gender: Male
  • The Yuzzum is in
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" WIP P54 16/04/14
« Reply #811 on: April 17, 2014, 09:26:10 PM »
Oh no, you melted one of those new Figma Indies? Are we related? Sounds like something I would do.

LOL yeah we most likely are and yeah it was the Figma Indy. His head and right arm were totally to far gone to help, on a god note thou I have extra parts and hands for when I get a few more of them.

Hemble,

Do you repaint the entire figure in your customs? I know you seal and putty the joints. If you do, do you prime the entire piece, or just apply the paint straight? Also, what paints do you prefer to use on figs?

Thanks!

Hey BigKev, I do repaint the entire figure and I don't prime the figure/s I just give them a good was with warm soapy water and then rinse off and let them dry. I use Vallejo and Games Workshop paints as I personally find these to be the best especially for adhering and no brush strokes and if you need anything else please don't hesitate to ask.

Ron

I agree.  Vallejo paints are the best, but I use a white plastic primer.

Hemble
Do you stalk the Smithsonian?  Your dios are gorgeous even at this stage.  I'm taking notes for when I take on Jabba's palace.

BigKev
I didnt know you customized.
« Last Edit: April 17, 2014, 09:35:57 PM by Sjefke »

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" WIP P54 16/04/14
« Reply #812 on: April 17, 2014, 09:27:06 PM »
now with lights on in different lighting.
« Last Edit: April 17, 2014, 10:52:47 PM by hemble »

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" WIP P54 16/04/14
« Reply #813 on: April 17, 2014, 09:32:49 PM »





Quote

I agree.  Vallejo paints are the best, but I use a white plastic primer.

Hemble
Do you stalk the Smithsonian?  Your dios are gorgeous even at this stage.

BigKev
I didnt know you customized.

Thanks mate and I wish I could see the Smithsonian the inspiration would be amazing. I have to change my comment on primers, the only time I use primers is on vehicles as they are much larger.

Offline BigKev

  • Cadet
  • *
  • Posts: 21
  • Feedback: +0/-0
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #814 on: April 17, 2014, 09:44:24 PM »
Sjefke,

What primer and why?

Thanks!

Offline Tamer

  • Administrator
  • Grand Admiral
  • *
  • Posts: 37642
  • Feedback: +204/-0
  • Gender: Male
  • He who is one with the Walker
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #815 on: April 18, 2014, 04:23:15 AM »
Hemble plus dios plus adding lights equals over the top fantastic. I love the light work on these. Off to share.

Offline the kit fisto

  • Cadet
  • *
  • Posts: 43
  • Feedback: +0/-0
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #816 on: April 18, 2014, 03:01:42 PM »
Like the fire too, did you use the glue gun to recreate it ?

Offline r1bb1t

  • Custom Fanatic
  • Captain
  • *
  • Posts: 732
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" WIP P54 16/04/14
« Reply #817 on: April 18, 2014, 04:45:14 PM »
now with lights on in different lighting.



Gorgeous work, Ron.


MY HOTH DIO VIDEO WIP
feature=share

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #818 on: April 18, 2014, 07:41:05 PM »
Hi All,

Hemble plus dios plus adding lights equals over the top fantastic. I love the light work on these. Off to share.

Thanks heaps Shawn.

Like the fire too, did you use the glue gun to recreate it ?

Thanks mate and the fire was done by using woodland scenics water affects.

now with lights on in different lighting.



Gorgeous work, Ron.

Cheers Buddy.

Ron

Offline the kit fisto

  • Cadet
  • *
  • Posts: 43
  • Feedback: +0/-0
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #819 on: April 19, 2014, 09:34:08 AM »
Looks like a good resin who harden fast is'nt it ?
Could be useful to create waterfall ot whatever fallingwater effect, or even ice stalagtite or stalagmite

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #820 on: April 19, 2014, 02:45:40 PM »
Looks like a good resin who harden fast is'nt it ?
Could be useful to create waterfall ot whatever fallingwater effect, or even ice stalagtite or stalagmite

The best way to describe it is once it dries it is like a rubbery fill to it which then can be stuck to almost any service using some woodland realistic water. And it is actually designed for waterfalls, ice and ice stalaglites and stalagmaites.

I used it on an older dio has a waterfall pics below.





Ron

Offline smeagol92055

  • Global Moderator
  • Colonel
  • *
  • Posts: 498
  • Feedback: +0/-0
  • Gender: Male
    • Smeagol's Art Blog!
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #821 on: April 21, 2014, 09:23:05 PM »
That is amazingly realistic. Great stuff!
I have altered the action figure. Pray I don't alter it further.

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Re: Hemble's other Custom's - Indy - Tomb of Horus 6" complete P55 18/04/14
« Reply #822 on: April 24, 2014, 12:50:46 AM »
That is amazingly realistic. Great stuff!

Thanks heaps mate.

Ron

Offline hemble

  • Grand Admiral
  • *
  • Posts: 6798
  • Feedback: +0/-0
  • Gender: Male
Hi All,

I have slowly been building Lance Quazers prize from the Mayan Secret photo novel comp which is Indy's office from TLC. The base is foam core cut to size and glued together.

The window frame shelves, table and chair (not in pics) are made from balsa wood, I used the thin clear plastic from the 6" black series boxe's for the windows and the latch and handles are from some 1/35 scale parts I hade in the bits box.

The some of the artifacts on the shelves are pieces of high density foam cut and designs scribed into them using a sharp pencil, there are pieces from the hasbro Indy line. Some other pieces are from Spry that he sent me when we did a trade and some pieces from a spare 1/6 scale map room I have had for a while.

I'm attempting to make a desk fan and phone from plasticard and find something to use as boilers.

Ron

Offline Tamer

  • Administrator
  • Grand Admiral
  • *
  • Posts: 37642
  • Feedback: +204/-0
  • Gender: Male
  • He who is one with the Walker
Re: Hemble's other Custom's - Indy's office WIP P55 25/05/14
« Reply #824 on: May 25, 2014, 07:18:11 AM »
Looks great. Wow, LQ is gonna be one happy dude! Off to the front page.