The Imperial Shipyards
Imperial Creative Engineering => Dioramas => Topic started by: spudafett on May 26, 2014, 01:07:50 AM
-
This isn't my first diorama, but it's the first one that I've put so much work into... and it's something I've been wanting to do for a long long time...
here are some teaser WIP shots:
Starting out with a base of styrene plastic and a backing of foamcore poster board....
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/10303460_700488489990163_614329896169406544_n.jpg)
slowly takes shape (and by the figures I bet you can figure out what it is)....
(https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/1607007_700508676654811_8094014308111667085_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-frc3/t1.0-9/10374904_700532489985763_7018733260478839916_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10346462_700542163318129_8264080032351434801_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-ash4/t1.0-9/10382745_700542186651460_4519765623211845916_n.jpg)
Still have a lot to go.... The backgrounds are printing off the right now and I'll work on them later this week. They are photoshopped copies of the Hot Toys iron man hall of armor diorama parts. Each cell of the grid is 2.5 inches by 4.5 inches tall... just barely fitting each iron man figure. I wanted it to be a tight fit so that I could get as many as possible in there. You see on the top a few larger bays for the bigger figures... This dio fits around 38 figures as it is right now... I will also be adding a small workshop area to the diorama either in front of the armors or as a separate piece of to the side. I have a 1:18th scale hot rod to add to it... and I plan on building several parts of the workshop with various greeblies, spare parts, and junk sitting around...
It may be a while before I get anything else done on this, but tell me what you think so far.
-
This is going to look awesome when it's complete and such a great idea to display all those suits.
Ron
-
Oh yeah, that is gonna rock. Off to share.
-
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10421152_700728909966121_3719752015057681199_n.jpg)
-
started an extension that will have a workspace and a small section of the living room upstairs...
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10382848_700906673281678_4198082953800827621_n.jpg)
(https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/t1.0-9/10361998_700906689948343_1329630782098592988_n.jpg)
anyone know where I could get a nice 1:18th scale couch? lol
-
furnishing the home...
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10390492_700922359946776_6008831910950542867_n.jpg)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/t1.0-9/10392540_700922403280105_5288204912936044883_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-ash4/t1.0-9/10337728_700926386613040_5023594980283955770_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/10296731_700926446613034_3975024732454142505_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10393178_700950269943985_8837975543903768364_n.jpg)
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/10172759_700950309943981_2354477492304719802_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10255573_700950326610646_7393317370375565786_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10300526_700951183277227_4535112805899466090_n.jpg)
I still have a lot of work to do. But I thought I'd throw some stiff in there to get an idea of how it will all fit together.
I still need to find a couch, or make one, with an entertainment center for the upstairs "living room" area...
I want to create some "hologram" like effects by printing off images on transparency paper and mounting them in front of the desk...
I want to use the same technique to create "hologram" like effects for in front of some of the armors...
I will be placing plastic sheeting in front of all the armors once they are in place...
I need to print off posters and other images to hang on the walls...
I need to print off images that can be pasted onto "computer screens" which will be placed around the shop...
I need to fill all 38 armor bays... and figure out what to do with the leftover armors!
but for now... that's what I've got. What do you guys think?
-
This is looking great and the I like how you have given the dio extra levels.
Ron
-
That is looking to be an epic dio.
-
Finally finished.... bear with me, I took a ton of photos. I won't include everything here however, so for more check out my FB gallery here:
https://www.facebook.com/pages/SpudaFetts-Custom-toys/275038512535165 (https://www.facebook.com/pages/SpudaFetts-Custom-toys/275038512535165)
(that link should work...)
before I get into the big stuff... here's my favorite little piece of the dio that I made:
(https://scontent-a-ord.xx.fbcdn.net/hphotos-frc3/v/t1.0-9/10152600_701442053228140_7627613527704164277_n.jpg?oh=f77d369809ff503e43dd995df97f6d30&oe=540323B3)
If you could read the tiny text that is on it... it reads "proof that tony stark has a heart" and is modeled after the gift pepper gives tony in IM1
so here are some stats:
The dio is at least 3 feet tall...
it has "bays" for 38 armors, 5 of which are extra large for hulk buster sized figures
The bays measure approximately 2.5 inches wide by 4.5 inches high...
The "glass" covering the bays is one large sheet of plastic and is not currently secured so that I can get the figures out if need be...
The workspace is crammed full of greeblies, extra pieces, and tools... some of which are fun little easter eggs
everything was constructed using foamcore poster board and a few sheets of styrene plastic with hot glue holding it together!
The diorama is actually two separate parts, the armory and the workshop.
none of the furnature (except the countertop under the black shelves) is glued down, so the entire diorama can be rearranged if need be.
ok... enough talk, here are a few pictures:
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/10402951_701442143228131_7464738893424375078_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10383584_701442163228129_3728133648904017692_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10369571_701442246561454_2726370461652892125_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10369571_701442246561454_2726370461652892125_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10417512_701442369894775_6769543763307931198_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10402603_701442389894773_7318972685496212262_n.jpg)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10356708_701442443228101_4151742283296877046_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-frc1/t1.0-9/10172868_701442486561430_375557461771301367_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10299157_701442513228094_8339069139731202573_n.jpg)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10014905_701442556561423_8978980056457735097_n.jpg)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10325701_701442579894754_6165180979404840462_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/t1.0-9/10402897_701442656561413_1778884777169792635_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/t1.0-9/10345775_701442896561389_9008868231793018590_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-frc3/t1.0-9/10304571_701442936561385_6675520182337300544_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/t1.0-9/10367598_701442976561381_3791298654090268620_n.jpg)
wallcrawler hanging around...:
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/t1.0-9/10414393_701443003228045_7884820969940269212_n.jpg)
A gift from stark to parker:
(https://scontent-b-ord.xx.fbcdn.net/hphotos-prn2/t1.0-9/10306257_701443086561370_1747366370469644982_n.jpg)
all the figures that didn't make it into the diorama, either villians (drones, whiplash, etc) or duplicates, or just plain uninteresting figures that I didn't include:
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10383579_701442993228046_442050989043575459_n.jpg)
Tony's cluttered workshop inside my cluttered workspace...:
(https://scontent-b-ord.xx.fbcdn.net/hphotos-frc3/t1.0-9/10307373_701443139894698_6446436364014504069_n.jpg)
and finally, the dio split into the two sections:
(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/t1.0-9/10314555_701443149894697_3730153188246742423_n.jpg)
Things I still want to do:
create transparency holograms to go in front of some of the armors and the desk...
rig up better looking computers for the desk and living room.
print out a hardwood floor pattern for the living room floor (it'll look better than that grey that I used everywhere else!)
and probably a few other things I can't think of right now.
So, what do you guys think? See anything I may have missed? Anything I should take out or think about adding?
-
Wow, Devin this brings a tear to the eye. Bravo.
Off to share.
-
This is incredible. How long did it take you?
-
Now when I would say I wanted a Hall of Armor that is the kind of set I was talking about, very cool.
The only thing I could think to add is to expand the house out (but then it would be a monster set too so that might not be plausible).
PS Did you mean to put IM 2020 in there? It's cool if you did but I feel the need to point out that he is Tony's nephew from an alternate reality which means he kind of doesn't fit with the others (being from the future and all). To a super-nerd like me he sticks out in the set but I can see why you might add him at the same time.
-
This is incredible. How long did it take you?
Thanks. I started this project sunday night... put some long hours in on it. So I guess around 3 days.
-
Now when I would say I wanted a Hall of Armor that is the kind of set I was talking about, very cool.
The only thing I could think to add is to expand the house out (but then it would be a monster set too so that might not be plausible).
PS Did you mean to put IM 2020 in there? It's cool if you did but I feel the need to point out that he is Tony's nephew from an alternate reality which means he kind of doesn't fit with the others (being from the future and all). To a super-nerd like me he sticks out in the set but I can see why you might add him at the same time.
I am so glad you like it.
I already made it larger than I wanted! Although I think the living room could be a bit bigger... and I know a full scale mock up of the house would be cool I dont see the playability in the rest ofthe house. If this was a set you could buy these are the parts itd have in it.
As for im 2020 I knew someone might point that out :P I have a few inthere that could probably be removed and swapped out. Im not entirely fond of the comic styled armor either. I have a few other im movie figures that I might stick in there.... or a combiner (except that they are realy short compared to the im2 figures!)
Thanks again guys.
-
Sweet looking dio. Congrats!
-
What a speedy build... It's awesome by the way!
-
AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!! I dig the SW X-Wing helmet and Spidey hangin' on the wall. Maybe on that wall hang something Tony would have like a replica of Da Vinci's glider. Or how about a "life-size" stormtrooper by the door?
-
AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!! I dig the SW X-Wing helmet and Spidey hangin' on the wall. Maybe on that wall hang something Tony would have like a replica of Da Vinci's glider. Or how about a "life-size" stormtrooper by the door?
you missed the other star wars easter egg... idk if it's easy to find... there's an IG88 torso and head in there somewhere :P
In other news... I found a small pack of printable transparencies at hobby lobby for 6 bucks for 6 sheets.... So I need to find some good line art and other graphics to create the hologram effects you see in the movies
-
Hobby Lobby sells sheets of wood flooring in their dolls section. I'm sure the print out will be fine but just as an alternative it might be worth looking into.
For the hologram diagrams are you going to use the clear plastic layered ones from the movie figures or are you doing something completely different.
Any plans for a Dum-E robotic arm robot? Here's one I did if it helps at all as a template.
http://www.joecustoms.com/customs/customs_xml_single.php?t=gp&d=smallplaysets&c=dummy
-
Great job Devin! I wish I had a work space that large.
-
Hobby Lobby sells sheets of wood flooring in their dolls section. I'm sure the print out will be fine but just as an alternative it might be worth looking into.
For the hologram diagrams are you going to use the clear plastic layered ones from the movie figures or are you doing something completely different.
Any plans for a Dum-E robotic arm robot? Here's one I did if it helps at all as a template.
http://www.joecustoms.com/customs/customs_xml_single.php?t=gp&d=smallplaysets&c=dummy
your dum-e bot arm looks great. I am planning on building one, it's in the works... i'm just having trouble finding just the right materials.
The holograms are going to be a little different. I'm going to print things off as line art on transparency paper, then put them into the dio. here is a sample of some of the armor holos I did last night:
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10320558_701816873190658_7447481211911947188_n.jpg)
The idea is to have them put in front of the armors and give them the holo-interface look to it. I also have a periodic table and a few other little things to add with this technique. Hopefully it works as planned...
-
finally got the first few "holograms" printed off. Here they are set up quickly in the dio. These are by no means the final results, although they show the promise of using printable transparencies!
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/q72/s720x720/10320473_702088009830211_8610933040918670223_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/q77/s720x720/10346645_702087973163548_520128151623950879_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/q77/s720x720/10351956_702087933163552_5384296877522586948_n.jpg)
(https://scontent-b-ord.xx.fbcdn.net/hphotos-xpa1/t1.0-9/q71/s720x720/10393825_702087796496899_5126008692245588784_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/q75/s720x720/10150663_702087766496902_8446355241791942977_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/q71/s720x720/10300159_702087619830250_8236247423262593686_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/q71/s720x720/10390121_702087593163586_3833930596347952622_n.jpg)
(https://scontent-b-iad.xx.fbcdn.net/hphotos-xfp1/t1.0-9/10154895_702108563161489_8151207115332690036_n.jpg)
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/1512575_702143156491363_6401903550596250838_n.jpg)
These turned out way better than I'd hoped. I really love the effect that the printed screens give with the transparency paper. They are not as detailed as they would be if printed on regular paper, and don't stand out as well in the photographs, but the fact that you can see through them just adds that element into the dio and doesn't make it feel as clostrophobic as it would if they were not transparent... imho.
what do you guys think?
-
Looks pretty nifty to me Devin. Off to share on the pages.
-
Dude, this is badass all day long. I love how the Mark 42 is up chillin' with the Avengers while Tony is actually downstairs. Nice touch! The clear holograms/computer effects are really top-notch and add a cool layer to the overall feel.
-
Execellent work indeed mate and the transparent screen are brillant.
Ron
-
Wow!!!!!
-
Great idea Devin ,i was gonna suggest something like this ,looking superb!
-
This just keeps getting better.
-
Finally got some time to actually install the computer screens and hologram transparencies into the dio...
I installed most of the screens onto the desk by cutting small strips of the transparency sheet into "stands" and gluing them down. The periodic table hologram is glued to the ceiling above it hanging down in front of the bookcase and the "partial" iron man figure sitting in the floor... The hologram blueprint of the armor hovering behind the hologram figure is my favorite. I glued it to a piece of stiff clear plastic and then folded a tab of it into a peg so that it would fit into the peg in the back of the figure... this gives it the appearance that it is floating behind the figure, but can still be removed!
enough talk:
(https://scontent-a-lga.xx.fbcdn.net/hphotos-xfp1/t1.0-9/10311728_703978882974457_1532109787530547057_n.jpg)
(https://scontent-a-lga.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10351532_703978846307794_269332388837513231_n.jpg)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10372336_703978822974463_4833913210554311562_n.jpg)
(https://scontent-b-lga.xx.fbcdn.net/hphotos-xfp1/t1.0-9/10395177_703978799641132_4088838511870960481_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10300505_703978756307803_2640203359777143276_n.jpg)
(https://scontent-a-lga.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10352789_703978696307809_2812016460155103090_n.jpg?oh=6a6404b131aa7824abfbe758bb02b451&oe=53E47708)
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10304630_703978629641149_4124616684151334327_n.jpg?oh=121b33481d723b08e1916dee21fcc173&oe=54067FDF&__gda__=1408241774_22d46f7d33ae6efab5a088d94250f12e)
(https://scontent-b-lga.xx.fbcdn.net/hphotos-xap1/t1.0-9/10345999_703978592974486_6135156079099180748_n.jpg)(https://scontent-b-lga.xx.fbcdn.net/hphotos-xpf1/t1.0-9/1517404_703978566307822_3687211546595754903_n.jpg)
(https://scontent-b-lga.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10390353_703978549641157_6086182874584971974_n.jpg)
I really love the way the transparencies came out.... I really think they would be even better if I could light them somehow... I'd love to light the diorama, but I think with the way I built it it'd be a real pain to go back and try to put any extensive amount of lighting into it...
-
(https://scontent-b-mia.xx.fbcdn.net/hphotos-xpf1/t1.0-9/q81/s720x720/10421640_703992269639785_5616147091103878576_n.jpg)
-
Looks great Devin. I like the effect it is giving you too.
-
These look great! Your first WIPs lookied like a cardboard carrying case. This project is developing into an amazingly detailed dio.
-
Damn those screens look awesome.
Ron