The Imperial Shipyards
Imperial Creative Engineering => Custom Figures => Topic started by: tonphanan on April 10, 2012, 07:35:19 PM
-
Hi all. Long time customizer. Wanted to start showing some of my stuff off here. Here is just a little of my work.
Darkside Obi-wan Kenobi
Obi-wan collapes to the ground of his hut. Gasping for air. He could not beleive the horride site. Everyday Obi-wan would stop by the Lar's mouisture farm and check in on young Luke Skywalker. But this day he was too late. The imperial Stormtroopers were leaving the burnt out home just as Obi-wan arrived. Kenobi stared off in shock as he counted three burnt bodies on the ground. His shock was quickly broken when he felt the presence of his old Padawan. Kenobi took off running.
Obi-wan pulled himself of the floor when he heard a mechanical voice "Ben"!, "Ben"! Vaders voice echoed through the hut. Obi-wan stepped outside. "How may I be of service?" Ben said calmly.
"You have failed for the last time, my OLD master." Vader reaches into the back of a speeder and drops the body of Luke Skywalker at Obi-wan's feet. "You killed me many years ago. Now I have killed my son in order to defeat you." Vader turns and walks back towards the speeder.
The snap-hiss of Obi-wan's saber fills the air. "If it is a fight to the death you are looking for Vader, I am ready." Vader does not turn. "There is no need to fight you, as I have already killed you." Vader gets into his speeder and returns to his ship.
Obi-wan was forever torturted by the lose of Luke. And blamed himself after Yavin was destroyed by the Deathstar. While his anger and self pity did not turn him completely to the Darkside of the force he did allow it to take over just enough to kill the man he use to be.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05713.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05714.jpg)
Star Wars Crimson Empire II
Xandel's Guard
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04967.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04968.jpg)
Iron Man Torso, Upper arms and upper legs. Stormtrooper lower legs and lower arms. Battle Corp viper head (cast) modded with a Clone Trooper rebreather.
Gungan Jedi
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05148.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05143-1.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05140-1.jpg)
Head- combo of Jar Jar and Tarpals
Torso-Givin
Arms-combo of Jar Jar and Tarpals
Legs-Tarpals
-
Darkside Kenobi!!! Awesome! Love the back story! Welcome to the Yards!
-
Some nice new figures, but then again, you have always done some pretty nice figures :)
-
Hey, great figures and welcome to ISY. Time to go get some of this on the front page. Love the backstory on Ben.
-
Welcome! I see you're not afraid to step outside the box. Impressive. Most impressive. You will fit in well here :D
-
Great customs and welcome to the yards!! :)
-
Awesome! Nice to see you here! Welcome to the yards! ;D
-
Awesome! Nice to see you here! Welcome to the yards! ;D
Ditto! :)
-
Thanks for welcome guys. Thanks for the front page add as well. I have a long weekend coming up so I will try to get more of my stuff up and hopefully a new custom if I can get all the parts together.
-
Good work! I especially like the Xandel's Guard. What background/dio is behind that fig?
-
This is the background I use for most of my pictures. Captain Nemo diorama. A McFarlane item I beleive.
(http://i28.photobucket.com/albums/c214/Tonphanan/dw-4-nemo-set.jpg)
-
Very Cool! I wish I had room for more dios and such.
-
Mind if I ask what your recipe was for the dark Obi-Wan?
-
Hello and welcome to the Yards! I remember your work from Yakface! Great stuff, glad you will be posting here. Love that Dark Obi Wan!
-
Mind if I ask what your recipe was for the dark Obi-Wan?
Dark Obi is a kitbash of the of the Vintage AOTC Obi and ROTS Anakin.
Anakin-Torso and upper legs
Obi-Head,arms and lower legs
ROC Cobra Commander hands
Cotton for the hair
Artic Snakeyes for the necklace
Fodder black cloth and robes.
-
D'harhan
http://starwars.wikia.com/wiki/The_Mandalorian_Armor
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05721.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05722.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05724.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05725.jpg)
-
Hey T don't know too much about this guy except he looks way cool. I did have a peek at the wookieepedia entry you referenced here and had to stop reading it so as i don't go spoiling the book for myself. On the FP!
More about this guy can be found here: http://starwars.wikia.com/wiki/D%27harhan
-
What an awesome character. I didn't know this one existed either. I am gonna have to get that book.
-
He looks like something H.R. Giger might have put together. I seem to remember seeing another character with a gun for a head, but I don't think it was in Star Wars. Now I'm wracking my brain to try to remember where I saw it!
-
Thanks guys. I put the link up for the book instead of the character because 1.) It's a good read and 2.) the picture of D'harhan was recently added and I had already started working on him before that plus the picture has too much Grevious likeness to it while the book gives just the basic body description :Canon head, Tail for a tripod and black armor. The canon still works even with all the cutting and glue I had to do and it does raise a little with the hinges on the side.
-
Pretty cool character likeness, well done! :)
-
Hard to have a social life when your face is a big honkin' cannon! Cool design! That background is insane, too, all that copper and patina! What is that, originally?
-
You know what? I was wrong. It was D'harhan I was thinking of. I remember his bada$$ character arc in the book.
-
That is a nice looking figure. Good likeness.
-
Cool figures! Welcome to the Yards.
-
Dude! That cannon-headed bounty hunter is SICK! Looks like sine kinda crazy Anime villain. Too cool. I second Sprywalker's question about the background also.
-
exceptional figures and wonderful steampunk background - really amazing work!
-
This is the background I use for most of my pictures. Captain Nemo diorama. A McFarlane item I beleive.
(http://i28.photobucket.com/albums/c214/Tonphanan/dw-4-nemo-set.jpg)
For those that missed the original post
-
I also have been working on a lot of Batman figures as well.
Scarecrow
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05230.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05231.jpg)
Went a different direction with Clayface than what I planned. Originally he was going to be in a containment suit. That didn't work out so I went with a more traditional concept.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05702.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05703.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05707.jpg)
ROBIN
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05712.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05709.jpg)
Batman's CONDIMENT KING
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05717.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05718.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05719.jpg)
Victor Zsasz
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05727.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05728.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05729.jpg)
-
Great job on all of these!!
-
Two-Face
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04996-1.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04997-1.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04990.jpg)
The Penguin
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05026-1.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05028.jpg)
Joker
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04981.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04984.jpg)
Mr. Freeze
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04960.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04962.jpg)
Batman
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05203.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05206.jpg)
-
All ARE AWESOME! The Penguin is my all time favorite villain! Great job! ;D
-
These are fantastic! I think Robin is my favorite, but it's hard to say for sure! You're on the front page with these.
-
Awesome! Big fan of Batman's rogues gallery and you're hitting the mark on each one! Great blend of movies and cartoons and comics! Heath Ledger Joker and Christian Bale Batman and animated Freeze! Love it!
-
Very cool. I just saw the new Batman Figures yesterday and they don't hold a candle to these.
-
I love all of the Batman figs, but the Freeze is outstanding. Too cool (pun intended).
-
Thanks for the comments. I really enjoy making the Batman figures. I really like to do the more obscure such as Ratcatcher. I will be posting him later today.
http://batman.wikia.com/wiki/Ratcatcher
-
Ah yea, all of these are awesome! I love seeing things like this! Very nice work.
-
Ratcatcher
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05805.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05806.jpg)
-
W.I.P.
Working on a "My Verse" of Star Wars. My Anakin wasn't a crybaby wussy. He gets beat by Obi-wan, but doesn't let a little lava keep him down. He works through the pain and with the help of the Emperor's droids builds a temporary suit because he has more Jedi ass kicking to dish out.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05810.jpg)
Padme' gives birth to the twins and it's back to buisness. She dawns a jedi tunic and some armor because she has to stop her husband from destroying the galaxy she just brought life into.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05812.jpg)
Also working on Gorm the Dissolver
http://starwars.wikia.com/wiki/Gorm_the_Dissolver
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05811.jpg)
-
Awesome! I really like your anakin and gorm wip, ;D
-
The last Batman pic gives the best darkness-vibe. Very cool. And I'm diggin the "My Verse" stuff. I have one where, if you're familiar with the Republic Commando novels, there's more of a happy ending. Perhaps that's something we could all display on a thread. We all show samples of our "My Verse" customs. Hmmm.
-
great job on the obi wan and a very interesting back story as well keep it up
-
I too like your version of Anakin. Back to the fp.
That Ratcatcher looks cool too.
-
Gorm the Dissolver! No way! I'd thought of doing one of those. Can't wait to see how he turns out!
-
Completed My Verse Vader
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05840.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05842.jpg)
Nomad Clone Trooper
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05851.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05853.jpg)
Storm Commando Officer
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05836.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05837.jpg)
Batman's Mad Hatter
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05832.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05834.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05835.jpg)
-
More W.I.P figures
Mr. Bones
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05830.jpg)
The Riddler
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05855.jpg)
-
Dude, those wips are awesome! I love your Batman customs!
That Verse Vader and the Clone are rockin as well. If I havent said it before, welcome aboard!
-
This last batch is really cool! I especially like the Nomad clone trooper and the Mad Hatter. What fig is that skull from on Mr. Bones?
-
great update...
Back on the front page.
-
This last batch is really cool! I especially like the Nomad clone trooper and the Mad Hatter. What fig is that skull from on Mr. Bones?
Thanks. It's a MU Ghost Rider. Had to cut the flames off as they do not boil off. A little sanding and remolding of the back of the head was needed to finish the skull.
Mad Hatter is one of favorites for a couple reasons. The torso came from a Spy Kids figure. The hat was Wild Bill. Arms-TAC Jawa and legs were Legacy Ugnaughts. The fact that I was able to combine all these different lines from different years from different companies into one figure makes it a really good figure in my opinion. The head came from 21st Century Soilders
The Nomad Trooper was pretty basic, but I'm glad everyone seems to like it. Might have to expand on the idea :-\
-
These guy's are really awesome!
-
Can't wait to see the end products!
-
DC Universe. Mr. Bones
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05868.jpg)
-
Your "My Verse" stuff looks very cool. I have often thought we should have an "Infinities PT" contest.
-
Really like the Mr. Bones!
-
Sweet! ;D
-
STORMTROOPER X
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05912.jpg)
-
He look's AWESOME! :D
-
May I ask where that awesome skull head came from? I'm looking to build a custom skull-headed figure myself and I've been scouring the Internet with little success.
-
Super cool custom man
-
May I ask where that awesome skull head came from? I'm looking to build a custom skull-headed figure myself and I've been scouring the Internet with little success.
Marvel Universe Ghost Rider. I had to shave off the flames as they would not boil off. Then just some minor filler work on the back of the head to cover the peg for the flame and smooth the whole head out.
-
Nice work on these last 2 figures! I believe that skull is from a Ghost Rider figure.
-
Thanks so much! I've been looking for a GI Joe Montezuma's Skeleton figure for a while but they're really hard to track down.
-
Do you sculpt on some of these!?? :D
-
I do a little sculpting. Mostly use the clay for filling in holes and spaces. I did sculpt the nose and hat on my Mad Hatter figure.
-
How did I miss two update? :(
Time to go get this update on the front page.
-
If the Ventriloquist was just a little darker.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05917_zpsceb34e4c.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05919_zpsdb6ad785.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05922_zps54629238.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05925_zps8cd509a2.jpg)
-
Sickiningly SCARY! Love it! :D
-
Headless Horseman
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05933.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05939.jpg)
-
So cool and well done!
-
Horrifyingly good. On the FP!
-
Well Chad beat me to that one! Nice custom.
-
That's great stuff man love the Ventriloquist
-
The Ventriliquist is awesome as is the Headless Horseman. I'd seen the WIPs on Facebook and I really dig the finished piece.
-
Awesome
-
Both of those are great pieces. I have to admit, I like the Ventriloquist is probably my favorite of the two!
-
Thanks everyone. I have a Pumpkin Monster I am working on as well. I'll post a WIP tomorrow.
-
Awesome Work! The Ventriloquist looks like Kelsey Grammar. There's a SW spoof - a "Cheers" Cantina.
-
Awesome Work! The Ventriloquist looks like Kelsey Grammar. There's a SW spoof - a "Cheers" Cantina.
"Hi everyone."
"Pooonda!"
-
haha yes he does! Good call!
Making your way in the galxy today takes every thing you got,
Taking a break from bounty hunting just hope you don't get shot,
Wouldn't you like to get away?
All those nights when you got in fights,
and hot Twi'leks to nail,
Your always working for Jabba,
Salicious hanging by his tail,
and your face you'll never show.......
sometimes you want to go...
-
Love your work. Your Robin is very cool indeed.
-
WIP Pumkin Monster
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05943.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05942.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC05941.jpg)
-
haha yes he does! Good call!
Making your way in the galxy today takes every thing you got,
Taking a break from bounty hunting just hope you don't get shot,
Wouldn't you like to get away?
All those nights when you got in fights,
and hot Twi'leks to nail,
Your always working for Jabba,
Salicious hanging by his tail,
and your face you'll never show.......
sometimes you want to go...
TOO FUNNY!
-
A revamped Shaggy and Scooby-Doo. Rest of Mystery Inc. to come.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06067.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06065.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06060.jpg)
-
Look AWESOME!
-
Awesome and on the front page. I can't wait to see the entire gang. Now I have that opening song stuck in my head.
-
What a cool idea !!! Its about time shaggy and scooby looked bad @$$ lol great work
-
Nice, and cool idea!
-
Zoinks!That shaggy & scooby are cool,and a great concept.
-
Mystra..WIP
http://starwars.wikia.com/wiki/Mystra
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06076.jpg)
-
Nice. Can't wait to see the finished product.
-
Skorr
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06085.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06084.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06081.jpg)
-
Mystra. Getting closer to being done.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06086.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06088.jpg)
-
I needed a break from some secret santa customs.
The Riddler
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06090.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06091.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06095.jpg)
-
Great job!
-
Skorr! Nice! And that Riddler is cool too!
-
Thanks guys. I'm happy with the Riddler, but not so much with Skorr. Need to rework that face plate, but it works for now.
-
nice customs
-
Looks good. Nice update. I really like Mystra, on the front page.
-
My Secret Santa figure from Doc Outlands Michael McNeill
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06234_zps2eea4e4c.jpg)
Mystra (Completed)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06233_zpsbd413949.jpg)
Skorr with cape (comic version inspired the cape)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06235_zpsd87e1a6e.jpg)
-
Jonah Hex
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06229_zpsfbeda99b.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06230_zpsb910d5ed.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06231_zps4f27d45c.jpg)
CABLE
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06226_zps20ba9a02.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06225_zpsbf61e6d9.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06227_zpscbeb558c.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06228_zps03a8b4ec.jpg)
WIP:
Fred (to go with Shaggy)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06220_zps5031f3e2.jpg)
Zulu Warrior
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06237_zps08cd4c42.jpg)
-
Nice, back on the front page.
-
Great work on Skorr! One of my favorite old school marvel comics Star Wars characters!
-
I really like the Zulu warrior.
-
Cable turned out cool. i like the Jonah Hex also.
-
Thanks for the comments everyone. The Cable has been on a bench for a long time. I was happy to finally get him completed.
-
The Hunchback of Notre Dame. My own version. A mixture of the Disney movie the classic black and white era. Quasimodo is the first. Judge Claude Frollo is in progress.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06610_zpsf8f2a5b3.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06610_zpsf8f2a5b3.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06608_zps33f41c76.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06608_zps33f41c76.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06611_zps5d3b1d9b.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06611_zps5d3b1d9b.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06613_zps39b967fb.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06613_zps39b967fb.jpg.html)
-
Hey, looks good. On the front page.
-
Now this is something you dont see often !! This is well done !!!
-
Okay, I know I was suppose to work on Frollo and the other characters to go with the Hunchback, but I got sidetracked.
The Beast
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06685_zpscdac0262.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06685_zpscdac0262.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06683_zps10c00b4a.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06683_zps10c00b4a.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06682_zpsa016b4da.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06682_zpsa016b4da.jpg.html)
I will be working on Belle as well.
-
Nice! What's the parts list?
-
Nice! What's the parts list?
Marvel Universe Beast:
Legs and Arms
The Hobbit Warg:
Troso and head
Ironman Whiplash whips for horns
-
Great. Thanks.
-
Now I like this one. Back to the front page.
-
Like I said on your Facebook, excellent work man, now you need him to fight a realistic gaston over a hot belle, lol.
-
Thanks everyone. I have a hot Belle in the works. Considering Gaston, my original plan was to have the remains of Gaston on The Beast bloody hand.
-
I like that hunchback! cool work
-
Head Man - Turkish Bootleg
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06689_zps6474d2e0.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06689_zps6474d2e0.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06688_zpsf8760d94.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06688_zpsf8760d94.jpg.html)
-
Nice, on the front page and our facebook page.
-
Kenix Kil - Kir Kanos undercover identity from Crimson Empire.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06696_zpsd97d75bc.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06696_zpsd97d75bc.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06695_zps4fbd91fd.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06695_zps4fbd91fd.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06697_zps5464817b.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06697_zps5464817b.jpg.html)
-
Very Nice!
Where the helmet came from?
-
Very Nice!
Where the helmet came from?
Thanks, the helmet is 25TH ScrapIron with removable visor, 25th Copperhead side vents, Jango Fett visor, vintage G.I. Joe Lightfoot for the parts around the mouth.
-
Looks good. Off to share. I like that helmet mix.
-
great job
-
Judge Frollo to go with the Quasimodo figure
(http://i28.photobucket.com/albums/c214/Tonphanan/93833780-6eb1-4ecb-ab42-5c05c4836e6a_zps956b2c7f.jpg) (http://s28.photobucket.com/user/Tonphanan/media/93833780-6eb1-4ecb-ab42-5c05c4836e6a_zps956b2c7f.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06870_zps0e39bd67.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06870_zps0e39bd67.jpg.html)
-
Ninja Master
Not based on anything, just needed a reason to use the head.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06900_zps1b42b82a.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06900_zps1b42b82a.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06901_zps9c9fd768.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06901_zps9c9fd768.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06903_zpsbc4302c7.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06903_zpsbc4302c7.jpg.html)
Work In Progress
Jedi Jawa v 2.0
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06899_zps31a7399f.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06899_zps31a7399f.jpg.html)
Work in Progress
Jedi Master N'Kata Del Gormo
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06897_zps5bf1dd91.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06897_zps5bf1dd91.jpg.html)
-
Nice update. Time to go share it on our pages.
-
Thanks Tamer.
On a side note the "wear" on the armor for the Ninja master was intentional. I figured someone as old as him would not have clean armor.
-
I figured as much. Very well put together figure. Wondered if you had thought about giving his head the same color as the arms and legs (Wookie brown?). Might be too much brown though.
-
I had considered it but I liked the white. I wanted there to be a difference between the fur on the arms and the hair of the character.
-
It works.
-
An old diorama. The group project was to build a teleportation device. It was an old project and I don't have the original pictures so I figured I would get some new ones.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06904_zps9b107316.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06904_zps9b107316.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06906_zpscf819330.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06906_zpscf819330.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06911_zpsaa44d412.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06911_zpsaa44d412.jpg.html)(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06908_zpsaea3abd1.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06908_zpsaea3abd1.jpg.html)(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06905_zpsa63d7364.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06905_zpsa63d7364.jpg.html)
-
Great bunch of custom figures you have here. Can't wait to see that Jawa Jedi and N'kata Del Gormo both finished!
-
I do like the blend of SW to JOE parts used in the customs. Off to share.
-
Great bunch of custom figures you have here. Can't wait to see that Jawa Jedi and N'kata Del Gormo both finished!
Thanks. I'm almost done with Jedi Jawa. Making a hilt that any Jawa would love. Will also add a bandolier, nothing special, just an accessory.
Try to smooth out Gormo some more before I start painting.
Tamer - always appreciate the shares. Thanks buddy
-
Jawa Jedi
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06937_zpsbe775782.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06937_zpsbe775782.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06935_zps1db36772.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06935_zps1db36772.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06936_zps78c9bb17.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06936_zps78c9bb17.jpg.html)
-
Looks great. Off to share.
-
love the droid arm lightsaber for the Jedi Jawa
-
love the droid arm lightsaber for the Jedi Jawa
Thanks. I wanted something different and figured if a Jawa had to build a hilt with what was on hand what better than droid parts.
-
NOMI SUNRIDER
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC02554.jpg)
Head-Comic Pack Covergirl
Torso/upper arm-Wiolesa
Lowers arms-Assaji Ventures
Legs-Evo Bultar Swan
Skirt-Dyed Princess Leia Collection Ceremonial Leia
The Dye job was done by thinning out some Testor Acyrl with water then soaking the piece followed by an extensive air dry. The skirt is a silk like material so the dye job needed to dry on to attach.
Jedi Dace Diath
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC02565.jpg)
Head-Bravo Team
Torso-Anakin
Legs & forearms-Quilian Vos v.2
Cay Qel-Droma
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC02735.jpg)
Head-JvC Wet-Suit
Torso-TAC Tattooine Luke
Legs-TAC CW shirtless Anakin
Left arm-25th Major Bludd shoulder & forearm, U-3PO hand and elbow
Cape-ROTS Royal Guard dyed a darker red
-
Ysanne Isard
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC03420.jpg)
Rogue Squadron: The Phantom Affair
Loka Hask
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04914.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04917.jpg)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC04916.jpg)
-
My comments are on the front page.
-
Wedge with Lt. Kettch.
Work in progress. Needs some obvious paint touch ups but otherwise it is put together.
Kettch's torso and head are a hollow cast and stuffed with cotton.
The casting liquid I used had gone bad and cured soft which worked out well for this piece. With the cotton in the torso it makes it like a plush figure.
http://starwars.wikia.com/wiki/Kettch
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06940_zpscb15e699.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06940_zpscb15e699.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06941_zps855c4eb4.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06941_zps855c4eb4.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06945_zpse7d501eb.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06945_zpse7d501eb.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06944_zpsf39fb069.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06944_zpsf39fb069.jpg.html)
-
Nice work... had no idea there were Ewok pilots! O0
0/
-
Nice work... had no idea there were Ewok pilots!
Me neither, but I guess they did ok on speeder bikes in ROTJ. Awesome, off to share.
-
Nice work... had no idea there were Ewok pilots! O00/
Well that makes another person but Lt. Kettch come out fantastic.
Ron
-
Ha, this is pretty funny! Never thought about and Ewok pilot but you made it happen! Very nicely done and I love the "extentions" for him to reach everything.
-
The X-Wing novels are some of my favorite novels out there. As much as I like my share of Jedi and Sith, I can't help but appreciate these guys. Great Work!!!!
-
Great work!
-
An assassin finds his prey, but which was the assassin and which was the prey.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06950_zpsb8447bde.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06950_zpsb8447bde.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06951_zpsca21ede4.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06951_zpsca21ede4.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC06948_zps855c60ab.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC06948_zps855c60ab.jpg.html)
-
Fantastic work and what a great use of parts.
Ron
-
Nice. Off to the front page.
-
WIP 6 inch G.I. Joe Blowtorch
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07010_zps9f83be7f.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07010_zps9f83be7f.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07012_zps968b2f29.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07012_zps968b2f29.jpg.html)
Parts:
Base body - Walking Dead Gas mask Zombie
Helmet -Cast of Riot Gear Zombie
O-rings for armor accents to match original Blowtorch
Kit bash flame thrower
Still working on fuel tank back pack
Will post update once first coat of paint is applied. Going with the color scheme of the ARAH Blowtorch. Will be boiling the hands to better form a grip on the flame thrower.
For the head I dremeled off the zombie zombie face to make the gas mask face fit more flush to the head.
-
Blowtorch is looking great, I can't wait to see it complete.
Ron
-
I think I recognize the base on this figure. Off to the front page.
-
well done and great choice of parts !!!
-
I like it! Interesting idea for a custom figure scaling a Joe up. Also interesting but logical idea for the base figure. Did you swap out a head? Or are you leaving the zombie head on and making the helmet mask non removable? I cant wait to see how you paint this guy.
-
Thanks all.
I'm leaving the Zombie head in tact. The head and helmet will all be one piece. I wanted it to be removable but did have a head to put in it's spot. I removed the original visor as it became discolored when I tried to remove the blood splatter. I used Testors window maker to fill in a new visor and also used the window maker to fill in the gaps between the O rings and the base body.
I have spray painted him all yellow and the paint just didn't take like I had hoped so I will be repainting by hand. Think I'm going to section him off and complete the lower half first, then the upper then the flame thrower.
-
Here is where I stand so far on Blowtorch. Painting is basically done on the done. Debating on a coating of wash though. Going to get started on the pack and torch. Going to try to fix the front of the helmet if possible.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07078_zpsa5fdd7f9.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07078_zpsa5fdd7f9.jpg.html)
-
Awesome! the assassin is so cool, what is the helmet from?
-
Awesome! the assassin is so cool, what is the helmet from?
Thanks, I got the helmet from Tri gate creations years ago in a fodder junk bag. I had to fix it up as he had a hole in the top and needed lots of dremeling to clean it up.
-
Looks good, update on the front page.
-
That is very cool. Nice idea on the upscaling concept.
-
Finally finished Blowtorch
The flash covered the wash I put on him but the last picture shows I did dirty him up a bit.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07139_zps2f0db3c1.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07139_zps2f0db3c1.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07141_zps2c52e7f1.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07141_zps2c52e7f1.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07143_zps88c458d2.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07143_zps88c458d2.jpg.html)
-
Cool, but upside down pics are freaking me out
-
Cool, but upside down pics are freaking me out
Odd, nothing shows upside down when I view the thread.
-
Wow, that turned out nice. That flash blurred out that first pic a bit, but I thought this was a great idea. Off to share.
And your pics are showing up fine to me.
-
My take on how the Vader vs. Windu fight should have gone down. Jango still loses though. This is a redo of one I made a long time ago.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07162_zps80d6b667.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07162_zps80d6b667.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07159_zpsd45e3fc2.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07159_zpsd45e3fc2.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07158_zps6c6f5d11.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07158_zps6c6f5d11.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07156_zps9af5e1a1.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07156_zps9af5e1a1.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07154_zpsaf85c19e.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07154_zpsaf85c19e.jpg.html)
My original concept
(http://i28.photobucket.com/albums/c214/Tonphanan/017.jpg) (http://s28.photobucket.com/user/Tonphanan/media/017.jpg.html)
-
Ouch! Looks gruesome! Great job!
-
Oh yeah, I like this a ton better than him just being dropped out a window. Time to go share.
-
I would love to see the battle that let to this gruesome conclusion. This looks great.
-
Light armor merchant with Jawa assistant
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07163_zpsde56c7bc.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07163_zpsde56c7bc.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07165_zps68531546.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07165_zps68531546.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07164_zpsee9a50f5.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07164_zpsee9a50f5.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07166_zps27c0782f.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07166_zps27c0782f.jpg.html)
-
You can read my comments on the front page. Looks great.
-
Thats a great use for a terrible Mace figure. And you merchant is awesome, never have too make merchants.
-
Checking back in with 2 updates.
Gorm The Dissolver - http://starwars.wikia.com/wiki/Gorm_%28cyborg%29
I have been working on this guy on and off for probably 8 years now and I finally created one I am happy with.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07446_zpsuy0f7tp6.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07446_zpsuy0f7tp6.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07447_zpsw0alg10c.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07447_zpsw0alg10c.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07445_zpsvf5wzzfk.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07445_zpsvf5wzzfk.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07449_zpss5ilcgtc.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07449_zpss5ilcgtc.jpg.html)
Next is Dodger from G.I. Joe BattleForce 2000 - an updated look. The torso and head are from Angle Forge.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07451_zpswl3agnpg.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07451_zpswl3agnpg.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07454_zps4oxdfk6r.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07454_zps4oxdfk6r.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07455_zps9mdtkwe5.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07455_zps9mdtkwe5.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC07456_zpswqvmlnw8.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC07456_zpswqvmlnw8.jpg.html)
-
Gorm is awesome! Great job on a most interesting background character. I'm not that into GI Joe (except for custom parts!), but Dodger looks really good - very nice paint job.
-
Thanks Starchaser
-
Sorry it has taken me awhile to get to this update. I have been sick, really still am, but can't stay down any longer. I like your Gorm and off to share.
-
Very cool figures. The gorm is top notch cool. Keep em coming.
-
Big Hero 6 Villain Professor Robert Callaghan
And about 450 beads for the Microbots
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08151_zps6wmbxab9.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08151_zps6wmbxab9.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08152_zpskaikps59.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08152_zpskaikps59.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08153_zpsvh9amtxv.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08153_zpsvh9amtxv.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08154_zpsmgjwegpr.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08154_zpsmgjwegpr.jpg.html)
-
Nice, time to go get this one on the front page. My daughter and I really enjoyed that movie. She likes your new custom vilian too.
-
Thanks Tamer, I plan on doing the entire team all with Microbot stands. It took about 12 hours to get all the strands put together. Hurts my shoulder and my eyes.
-
I can imagine your eyes and fingers were hurting after all that. The attention to detail really sets off the figure though.
-
I know what feel like about your eyes hurting, mine is doing that right now, but your attention to detail amazing!!!
-
Impressive! The beads really do a great job of replicating the minibots (but I can't imagine being that patient - kudos).
-
Chattle from G.I. Joe Action Force
(http://i28.photobucket.com/albums/c214/Tonphanan/10417513_817215928290677_1871307101734324123_n_zpstkj6afoh.jpg) (http://s28.photobucket.com/user/Tonphanan/media/10417513_817215928290677_1871307101734324123_n_zpstkj6afoh.jpg.html)(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08206_zpsmncuh5cl.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08206_zpsmncuh5cl.jpg.html)(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08201_zpsf3sgdall.jpg)[URL=http://s28.photobucket.com/user/Tonphanan/media/DSC08204_zps8clkfglv.jpg.html](http://i28.photobucket.com/albums/c214/Tonphanan/DSC08204_zps8clkfglv.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08201_zpsf3sgdall.jpg.html)(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08203_zpsfnvuo5kp.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08203_zpsfnvuo5kp.jpg.html)
-
He looks good on the front pages. Nice work here.
-
Great execution on this figure. He looks really cool. I bet he was a lot of work.
-
Santa Claus is Coming to Town
Santa Claus is tired of Cobra's anti-festive attitude and is taking it upon himself to put a stop to all things evil.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08223_zpsoqku04kr.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08223_zpsoqku04kr.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08218_zpsia50n8hb.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08218_zpsia50n8hb.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08217_zps3dzb54ei.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08217_zps3dzb54ei.jpg.html)
-
That is so awesome!! GI Joe Santa rocks!
-
Now this is one tough Santa. I like it too. Off to share.
-
Santa looks great! I love the detail of him holding Cobra Commander's helmet.
-
Thanks, he originally was going to be Santa's brother that took care of the naughty list but then things took a G.I. Joe turn. He is still taking care of the naughty list though.
-
Awesome work mate I really like Chattle.
Ron
-
Star Wars: Dark Forces - Death of Kyle Morgan
(http://i28.photobucket.com/albums/c214/Tonphanan/Kyle_Morgan_death_zps0i3ey8ow.jpg) (http://s28.photobucket.com/user/Tonphanan/media/Kyle_Morgan_death_zps0i3ey8ow.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08393_zpsqivfr6ge.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08393_zpsqivfr6ge.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08398_zpsrjudkqos.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08398_zpsrjudkqos.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08402_zpsmutymdqj.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08402_zpsmutymdqj.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08403_zpsvpm0hcnh.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08403_zpsvpm0hcnh.jpg.html)
-
This is super sick dude! I really dig this macobre type shot. GREAT WORK BRO :)
-
Creepy but Awesome at the same time well done mate.
Ron
-
I agree a bit gruesome, but spot on for what you were working from. Off to share.
-
Thanks guys, I am happy with how it turned out. It's one I've been wanting to do for a long time and finally all the parts came to work out.
-
I must agree. Gruesome, yes but cool, too.
-
Continuing my Big Hero 6 series - Baymax in Battle Suit.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08510_zpsry7osicg.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08510_zpsry7osicg.jpg.html)
So many beads
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08511_zps9j6r1can.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08511_zps9j6r1can.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08514_zpsxhtk3t6r.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08514_zpsxhtk3t6r.jpg.html)
-
Awesome!
-
Very nice, off to share.
-
Very nice!
-
A fodder page I follow is having a no paint kit bash contest. This is my entry. I call it a Special Forces Snow Trooper.
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08565_zpsm74eeuha.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08565_zpsm74eeuha.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08568_zpso8hocn0x.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08568_zpso8hocn0x.jpg.html)
Comic book artist Tom Hodges has a comic series he is making using Kickstarter (unintentional plug) called Midknight. This is one of the characters - Hades
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08552_zpskthknvtx.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08552_zpskthknvtx.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08562_zpscz9llv7b.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08562_zpscz9llv7b.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08557_zpsxxn3xngt.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08557_zpsxxn3xngt.jpg.html)
(http://i28.photobucket.com/albums/c214/Tonphanan/DSC08541_zpsbxg6zxgs.jpg) (http://s28.photobucket.com/user/Tonphanan/media/DSC08541_zpsbxg6zxgs.jpg.html)
Tom's design
(http://i28.photobucket.com/albums/c214/Tonphanan/hades_by_hodges_art-d9qh6z6_zpsyrwiup7i.jpg) (http://s28.photobucket.com/user/Tonphanan/media/hades_by_hodges_art-d9qh6z6_zpsyrwiup7i.jpg.html)
-
I really like that Hades, off to share.
-
WOW! Hades is so good.
Thanks for the reference image.
-
tonphanan your version of Big Hero Six is pretty awesome, good choice of parts
-
The Hades figure is really interesting. What did you use for the cloth? Great job on Big Hero Six too.
-
The Hades figure is really interesting. What did you use for the cloth? Great job on Big Hero Six too.
Thanks. It's cheesecloth and liquid starch. The torso is being supported by the stiff cloth, no rods or wires.
-
New mini Dio based on concept art for Rogue One.
(https://i.imgur.com/t8rYog0.jpg)
(https://i.imgur.com/CIpUFRO.jpg)
(https://i.imgur.com/kKhm7qe.jpg)
I see I need to update all my old photobucket links too. Ugh
-
Looks pretty spot on to me. Off to share.
-
are those hands sculpted or cut from an existing figure?
-
That is an impressive diorama.
What parts did you use for the rebel trooper?
-
The torso and head is from an Elite Forced figure. The arms are from a German soilder from the 21st Century toy line and come in that pose. Legs are a POTJ Rebel Fleet Trooper.
-
Brilliant combination of parts! The troopers works beautifully and the dio. turned out really well.
-
My WIP of a figure I am making based on the art of Chris Raimo
-
Looks spot on with your reference image. Off to share.
-
Thanks Tamer. My current WIP.
-
DH this is awesome!
-
Wow, it even lights up. Looks spot on. Off to share.
-
Pretty freaky!!!. Nice job executing the figure from the drawing, looks really good. I bet this was a fun figure to design.
-
Freaky but awesome mate, I LOVE IT.
Ron
-
Finished the Santa figure and added a mini dio scene to give a sense of scale of the character.
-
So awesome!
-
Love it.
-
I am way behind on my custom postings due to travel this week, but this is on the front page! It turned out great.
-
Thanks Tamer. I shared the WIP as I went, with the artist Chris Raimo. He really liked it and shared it on his FB and Instagram pages. For me that meant a lot to see his fans like and comment on my work.
-
Oh yeah, that ought to have made your day. Pretty cool when the artist likes it!