The Imperial Shipyards

Imperial Creative Engineering => Parts Bin => Topic started by: asol1025 on September 10, 2013, 06:12:18 AM

Title: AT-TE missiles
Post by: asol1025 on September 10, 2013, 06:12:18 AM: Hello,

I was wondering if someone out there is selling the missiles to the AT-TE?

I have not had any luck finding any and since I am new here- I cannot PM anyone i think.

Cheers,
asol1025
Title: Re: AT-TE missiles
Post by: Clonehead on September 10, 2013, 09:39:38 AM: Nope, no Pms until you make at least 10 postings in the forums.
I do make the atte missiles, both big and small. I haven't listed or made any in a while as I have been busy at work. I plan on doing some casting tonight. I will try to get a set or two going.
Title: Re: AT-TE missiles
Post by: asol1025 on September 10, 2013, 10:12:23 AM: Very Cool 0/

I am very interested if you do. I need all the small missles and the large one as well.
I appreciate it very much. Just let me know when the items are availabe and the cost.

Cheers,
asol1025
asol1025@yahoo.com
Title: Re: AT-TE missiles
Post by: deus92503 on September 10, 2013, 04:57:02 PM: yes please me too
Title: Re: AT-TE missiles
Post by: Clonehead on September 19, 2013, 05:53:13 PM: got three sets of the smaller ones listed. Got to take pics to make a listing for the big ones.
Title: Re: AT-TE missiles
Post by: Clonehead on September 19, 2013, 06:42:26 PM: Got 3 of the big ones listed now.
Title: Re: AT-TE missiles
Post by: asol1025 on September 20, 2013, 07:12:53 AM: Picked up the set this morning from you this morning

Thanks Again

Any ideas on a paint that is close to the factory paint? 0//
Title: Re: AT-TE missiles
Post by: Tamer on September 20, 2013, 07:50:38 AM: I saw that our Clonehead has added some much needed AT-TE and LAAT missles and wanted to get em featured:

AT-TE Large Cannon Missle
(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint1_zpse3731201.jpg)

(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint2_zps51196798.jpg) (http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575055288&toolid=10001&campid=5337373868&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FStar-WarsClone-Wars-Custom-Resin-Cast-Big-AT-TE-Missile-Loose-%2F350879558626%3Fpt%3DUS_Action_Figures%26hash%3Ditem51b20d2be2)

AT-TE Smaller cannon missles
(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint3_zpsb5e540db.jpg)

(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint4_zpsdd4fa4f3.jpg) (http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575055288&toolid=10001&campid=5337373868&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FStar-WarsClone-Wars-Custom-Resin-Cast-AT-TE-Missiles-Loose-%2F251342721485%3Fpt%3DUS_Action_Figures%26hash%3Ditem3a853191cd)

LAAT (Republic Gunship) Back Missle
(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint5_zpsbfd834df.jpg)

(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint6_zps22d95738.jpg) (http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575055288&toolid=10001&campid=5337373868&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FStar-Wars-Custom-Resin-Cast-Republic-Gunship-Aft-Gun-Barrel-Loose-%2F251342718891%3Fpt%3DUS_Action_Figures%26hash%3Ditem3a853187ab)

LAAT (Republic Gunship) Nose Missles
(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint7_zps782b65e9.jpg)

(http://i46.photobucket.com/albums/f115/CTtamer/VALUEDCUSTOMER/clint8_zpsa2cf0822.jpg) (http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575055288&toolid=10001&campid=5337373868&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FStar-Wars-Custom-Resin-Cast-Republic-Gunship-Nose-Missiles-Loose-%2F251342717203%3Fpt%3DUS_Action_Figures%26hash%3Ditem3a85318113)

As you can see these are just spot on accurate and fit in the right places. I have done business with Clint numerous times and he always goes above and beyond to make sure you are pleased.
Title: Re: AT-TE missiles
Post by: Spookymufu on September 20, 2013, 08:11:12 AM: I dont need them, but does he supply BMF missiles too? I have seen a lot of people ask for replacement ones
Title: Re: AT-TE missiles
Post by: Clonehead on September 20, 2013, 10:04:47 AM: Quote from: asol1025 on September 20, 2013, 07:12:53 AM
Picked up the set this morning from you this morning

Thanks Again

Any ideas on a paint that is close to the factory paint? 0//
thanks. There is a vellejo color that is real close. It is a flat dark metallic grey. I would use an undercoat of their flat varnish to make it stick better.

Ty, tamer, for the props.
I do make the falcon missiles but don't have any listed at this time. Those will also double for the gunship with the flip out top launchers as well as the turbo tank side launchers.
Title: Re: AT-TE missiles
Post by: Tamer on September 21, 2013, 12:00:28 PM: No problem Clint. I appreciate you making these available. Now to get you onto those potf2 and vintage walker parts as I have about three or four walkers that need parts badly.