« previous next »
Pages: [1] 2   Go Down

Author Topic: It must be an Imperial code.  (Read 2688 times)

Offline Splashcoat

  • Ensign
  • *
  • Posts: 72
  • Feedback: +0/-0
It must be an Imperial code.
« on: July 04, 2013, 01:09:41 PM »
Here’s a look at my modification of the old Kenner “Power of the Force”  Imperial Probe Droid action figure. It’s essentially identical to the Kenner toy only with refined antennae made from wire, action feature firing missiles and screw holes puttied over, improved detail highlighting and an accurate coat of paint... and a nifty stand made from an old Gatorade container lid.












« Last Edit: July 04, 2013, 01:24:22 PM by Splashcoat »
Logged
... but I was going to Toschi Station to pick up some power converters!

Offline Wookie-Balls

  • Commodore
  • *
  • Posts: 975
  • Feedback: +6/-0
Re: It must be an Imperial code.
« Reply #1 on: July 04, 2013, 04:06:40 PM »
Very, very nice work! Strangely enough I found my old PD in a loft clear out the other day as considering doing something similar - although I doubt  as well as this one!

Logged

Offline Luke Sprywalker

  • Global Moderator
  • Grand Admiral
  • *
  • Posts: 6749
  • Feedback: +30/-0
  • Gender: Male
Re: It must be an Imperial code.
« Reply #2 on: July 04, 2013, 06:27:47 PM »
Very nice work to transform this from a toy to a great display piece! The wire looks so much better and the stand is just great!
Logged

Offline JediMerc

  • Brigadier
  • *
  • Posts: 1244
  • Feedback: +0/-0
Re: It must be an Imperial code.
« Reply #3 on: July 05, 2013, 05:24:58 AM »
This turned out very nicely!  

What brand/ paint color did you end up using for this?  Also, what type of wire did you use for the antennae?  It looks perfectly straight and very fine (i.e. thin), which worked perfectly here.

*i love the PD image you added here; never thought of the droid's code transmission as sounding like that!  Lol
« Last Edit: July 05, 2013, 05:26:55 AM by JediMerc »
Logged

Light side, dark side...meh.  Just give me a lightsaber and a blaster and I'll take care of it!

Offline Tamer

  • Administrator
  • Grand Admiral
  • *
  • Posts: 37712
  • Feedback: +204/-0
  • Gender: Male
  • He who is one with the Walker
Re: It must be an Imperial code.
« Reply #4 on: July 05, 2013, 07:43:09 AM »
Boy I agree, such a great looking custom with some very close attention to detail. Back on the front page.
Logged

Offline Splashcoat

  • Ensign
  • *
  • Posts: 72
  • Feedback: +0/-0
Re: It must be an Imperial code.
« Reply #5 on: July 05, 2013, 07:45:19 AM »
Thanks, everyone.

@Jedimerc: The paint is Semi-Gloss back and comes from Tamiya's line of model paints; I feel that the semi-goss finish gives a decent metallic look. The paint is designed for plastic models so it works fine for figures as well. The thing is, it will only provide even coverage if it's applied by airbrush. Brush painting large areas of vinyl with this paint just won't work. As for the wire, it's annealed florist's wire that I found at a craft store. It's a very rigid, almost springy wire that I believe is made for use by florists to create flower arrangements.

Cheers.
Logged
... but I was going to Toschi Station to pick up some power converters!

Offline The Willoughbian

  • Lieutenant
  • *
  • Posts: 180
  • Feedback: +0/-0
  • Gender: Male
Re: It must be an Imperial code.
« Reply #6 on: July 05, 2013, 09:26:26 AM »
Nice. Looks great.
Logged

Offline mr.Jedi1977

  • Major
  • *
  • Posts: 1399
  • Feedback: +0/-0
Re: It must be an Imperial code.
« Reply #7 on: July 06, 2013, 07:22:39 AM »
Wow! This is truly amazing all around ! The antennas just make this so much better
And how a little bit of paint can take a project  and make it so much better . Again
Excellent job
Logged

Spookymufu

  • Guest
Re: It must be an Imperial code.
« Reply #8 on: July 06, 2013, 11:24:49 AM »
Id like to know a bit more about the base...
Logged

Offline Clonehead

  • Global Moderator
  • Grand Admiral
  • *
  • Posts: 13183
  • Feedback: +93/-0
  • Gender: Male
Re: It must be an Imperial code.
« Reply #9 on: July 06, 2013, 12:44:27 PM »
Very nice work on that one! That base turned out well.
Logged

Offline Jedi Minstrel

  • Marshal
  • *
  • Posts: 1664
  • Feedback: +0/-0
  • Gender: Male
Re: It must be an Imperial code.
« Reply #10 on: July 07, 2013, 07:12:23 AM »
TOO COOL!
Logged

Offline Splashcoat

  • Ensign
  • *
  • Posts: 72
  • Feedback: +0/-0
Re: It must be an Imperial code.
« Reply #11 on: July 07, 2013, 08:51:50 AM »
Quote from: Spookymufu on July 06, 2013, 11:24:49 AM
Id like to know a bit more about the base...

A few years ago, Gatoraid mix came in a container which looked like a scale model of their 5 litre cooler:



I thought the lids would make cool-looking bases for models so I stockpiled a few; I just epoxied a rod into the lid and filled it with plaster to add some weight. Sadly, Gatoraid mix now comes in a tin with a plain soft plastic lid that is useless for this application.

Most of my small scale SW models are on these bases:


Logged
... but I was going to Toschi Station to pick up some power converters!

Spookymufu

  • Guest
Re: It must be an Imperial code.
« Reply #12 on: July 07, 2013, 03:38:28 PM »
those bases are perfect and I have NEVER seen that Gatorade container before. Thats really neat
Logged

Offline Splashcoat

  • Ensign
  • *
  • Posts: 72
  • Feedback: +0/-0
Re: It must be an Imperial code.
« Reply #13 on: July 08, 2013, 05:01:25 AM »
The actual container looked like this (cigarette lighter not included):



I'm down to my last couple of lids. I'm thinking of making a mold of one so I can cast more in resin when I need them.
 
Logged
... but I was going to Toschi Station to pick up some power converters!

Offline Tamer

  • Administrator
  • Grand Admiral
  • *
  • Posts: 37712
  • Feedback: +204/-0
  • Gender: Male
  • He who is one with the Walker
Re: It must be an Imperial code.
« Reply #14 on: July 08, 2013, 05:28:18 AM »
I am definitely thinking mold this up and cast it. Heck, sell it here; folks would buy em! I can see they make great bases. What is the diameter of these again? Looks roughly to me to be about three to four inches.
Logged
Pages: [1] 2   Go Up
« previous next »