Topic: Hemble's other Custom's - German Armoured Train WWII 1:35 P198 02/04/2024

[hemble]

Awesome work as always pal!

Thanks so much buddy.

Ron

[hemble]

Hi All,

Dracula display and figure completed.

Note - last pic is what Dracula looks like out of package.

Recipe.

Dracula - is from Jada Toys and I repainted him using Vallejo and GW paints and I made the face more fleshly/white instead of the complete white which he came as.

Base - is high density foam and I carved the stones walls/floor and stairs using a pencil, the door is balsa wood with plastic card for the bolts and door handle and the wall torch is made using plastic parts from the bits box.

The flame is Woodland Scenics Water Effects and once dry I painted the flat side with orange/yellow/red/white and the spider webs are pieces of cotton ripped apart and glued in place. The coffin is made using cardboard and balsa wood and the white fabric inside is tissue paper which was secured with watered down PVA glue and then painted white.

[hemble]

4 more.

[hemble]

Last 3.

[Clonehead]

Exquisite Dracula scene, Ron

[Tamer]

Ron, you just do good work. Period.

So off to share this on the front pages.

I think I am on customs overload right now. So much gorgeous work shared here  the past few days.

[hemble]

Exquisite Dracula scene, Ron

Thanks heaps buddy.

Ron, you just do good work. Period.

So off to share this on the front pages.

I think I am on customs overload right now. So much gorgeous work shared here  the past few days.

Thanks heaps Shawn and yeah I have a lot of catching up to do looking at everyones work.

Ron

[hemble]

Hi All,

3rd Legion Trooper - Lunar Wars.

This was a simple custom to do which is just a repaint and custom base. I have added a before and after picture of the figure.

Recipe.

Figure - is from Joytoy and I decided to repaint it white with blue offsets using Vallejo Paints and the decals are from 1:20 scale Maschinen Krieger kit.

Base - is an old action figure base and the large rocks are pieces of high density foam ripped apart and glued on and then I used a mix of spakfilla/sand and applied it and then used kitty litter for the smaller rocks. Once the ground work was dry I then painted and weathered the rocks and ground using Vallejo Paints.

Ron

[hemble]

Last 3.

[hemble]

Hi All,

Stargate Diorama roughly 1:56 scale.

Recipe.

Jaffa - the miniatures are downloaded from myminifactory and made by Monstrous Encounters and I printed them off with my resin printer. Here is the link https://www.myminifactory.com/.../3d-print-sg-royal-guard... these are 32mm and 28mm miniatures and resized them to 1:56 scale. I have also resized some to 1:35 scale and the details even up sizing are awesome, I painted them using Vallejo Paints.

Base - is a piece of foam with balsa wood sides, the Stargate is a resin print I did and the monoliths and statues are from some spare 1:6 scale Indiana Jones Map room diorama I have had lying around.
The stairs were done using foam and the floor was done by using a pencil and drawing them in the the main base foam, the said is a mix of spakfilla/sand.

Ron

[hemble]

4 more.

[hemble]

last one.

[RCWCreations]

This is absolutely awesome mate, well done!

[Tamer]

Absolutely awesome Ron.

I had to get this one on the front pages.

[hemble]

This is absolutely awesome mate, well done!

Thanks so much Richard.

Absolutely awesome Ron.

I had to get this one on the front pages.

Thanks heaps Shawn.

Ron